Modding a Bond
-
I don’t think the bit adaptor has ever been on a tool with non-locking blades. I’ve even looked through the Retired Tools section of the Leatherman website, but I’d knot think there’s anything.
I’ve got fairly simple needs myself, but I do like to have decent wire cutters and saw in case my dog gets caught up in anything, and I like a serrated blade.
I was thinking about the legality this morning, and came to the conclusion that any copper who thought a Rebar (with blades inside the handles, not OHO), carried in a nylon sheath in a trouser pocket is a weapon, not a tool, is probably going to give you grief whatever you’re carrying.
-
The Curl has a non locking bit adapter

The tools that can be swapped into a Bond withput any modifying are most anything from a Rebar, the inside tools of a Curl, Wave or Charge. The tools from the Blast, Fuse and Kick and most of the old school tools but the old school tools wpuld have to be ground on a little
The old school tools meaning PST, PST II, Pulse, Sideclip and OG Wave 
Hope you can get the tool the way you like it

-
The Curl has the opposite of what we need for UK legal carry. A locking bit adaptor and non-locking blade would be perfect.
So could a Wave bit adaptor be put into a Bond in place of something else?
That would just leave the saw for Cynan’s list.
-
Thanks guys.
So if I understood correctly…
Saw - Rebar/Wave/Charge
Serrated blade - Rebar/Wave/Charge
Bit adapter - CurlThen it’s just finding those parts (wonder if anyone on here has them spare and for sale?) and a method to remove the bolts.
-
No, just the inside tools of the Wave, Charge and Curl. That means the saw or blade would only be from a Rebar or Blast

The bit adapter could come from any of the 4 inch tools that had ine pretty much

-
@Poncho65 said:
No, just the inside tools of the Wave, Charge and Curl. That means the saw or blade would only be from a Rebar or Blast
The bit adapter could come from any of the 4 inch tools that had ine pretty much

Looking at two donor tools to get the saw and bit adaptor, plus needing the wrenches to take them apart…
Sounds like a lot of hard work to me.
Cynan, will it be for everyday carry? If you’re using it for work or for a hobby, that’s your “good reason” for carrying it and locking blades are not illegal.
-
@Crunchie64 said:
Looking at two donor tools to get the saw and bit adaptor, plus needing the wrenches to take them apart…Sounds like a lot of hard work to me.
Cynan, will it be for everyday carry? If you’re using it for work or for a hobby, that’s your “good reason” for carrying it and locking blades are not illegal.
It’s be for an EDC. Not for work and not for a hobby.
I don’t mind the work… I do mind having to buy three MTs to make 1 and effectively trashing 2 others.. so would like to be able to acquire the parts I need from others that don’t need them, or I’ll look to buy used tools second hand that might need some love to restore.
Or I buy a locking version and just risk it.
-
If it was me this is what I would do. Go with the Rebar and then modify the tangs of the tools I didn't want to lock. It should be as simple as grinding away the back part of the locking notch so that it doesn't engage the lock.
Like this

-
@SteveC said:
If it was me this is what I would do. Go with the Rebar and then modify the tangs of the tools I didn't want to lock. It should be as simple as grinding away the back part of the locking notch so that it doesn't engage the lock.Like this
Great idea! Thanks!
I’d still like a bit adapter but I could live without it, so thanks again for the idea.
-
For the time, money, and hassle you’d save, these bit extenders really aren’t too bad.
[attach id=0 msg=2406023]

-
it would be easier to mod the tools on a Rebar to be non locking
and the Bit Adapter is totally a great option for the square shank Phillips driver

Still probably need to try and source some Loki Wrenches (or similar wrenches) to disassemble the tool to grind them though

-
How free are the tools on the Wave? I could get a Wave and mod those tools to be non locking and not need a Loki tool.
My only concern is that both the Rebar and Wave are large tools than the Bond in my pocket.. though I'm sure I'll get used to it.
-
The size difference between the Bond and the Rebar is tiny. Hard to believe the Rebar has the extra tools when you see them side by side.
-
@Crunchie64 said:
The size difference between the Bond and the Rebar is tiny. Hard to believe the Rebar has the extra tools when you see them side by side.Good to know. Thank you.
-
As Crunchie said, the difference is not noticeable and the Rebar is definitely the superior tool. The Bond does have its place but the Rebar wins in just about every category

Juat by shuffling things around you can add scissors and only lose the lanyard ring, plus swap the Phillips out for the bit driver and after grinding the tool you need to to be non locking you would have everything you wanted plus some stuff

-
[attach id=0 msg=2406118]
[attach id=1 msg=2406118]
The ONLY benefit of the Bond is the non-locking blades, as far as I can see.


-
Not sure how you feel about second hand but there is a Rebar in our MT for Sale sub forum by a UK member

A little clean up and it would be a great tool to mod

It would be at your own risk but he does have several posts here, so not a complete newbie

-
Ah damn it, they would have been perfect!
Only problem I ordered one last night. Doh.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login