What Did You Use Your Multitool For Today?
-
Been toting my Tinker Small all week. Yesterday I had an impromptu e-clip to remove, and today I had to change bulbs on my truck and daughter's Jeep.


-
@alexanderre said:
This time around I brought my Telecaster and my new-to-me yet needing quite a few fixes Fender Champ 600 to the western part of Ukraine while it’s kinda hot in Kyiv.I also brought a few stompboxes - one of them is my kinda mojo - EHX Holystain - a Big Muff fuzz + some cool effects.
I bought it about 15 years ago and didn’t play much lately - I quit serious music about 5 years ago and didn’t touch it since then.
To my surprise it was in a pretty awful shape - noisy pots and switches disrupted the last bits of inspiration I still manage to acquire [emoji23].So today I finally had time to go get all the necessary stuff and time to disassemble and clean it up.
Used Spirit all the way - first the cap lifter to pry away the knobs they were too stiff to be removed with the bare hands- trust me, I really tried [emoji38]

Then I used pliers to remove the top nuts - didn’t cover the plier head with any insulation to avoid scratches since those nuts have washers.

As I approached the foot switches I did cover the pliers with insulating tape and indeed managed to avoid scratches (for the most part [emoji23]).

And then finally I flipped the case over to unscrew the bottom cover with a phillips screwdriver.

Then it was time to remove the main board - to do so I had to unscrew the input/output jacks with the pliers first.

And there it was - accessible and ready to get its first spa in 15 years [emoji23]

I removed the metal cover of each of the two foot switches with Spirit’s flathead screws and sprayed a WD40 Contact Cleaner inside of it.


Then I did the same cleaning procedure for each of the pots - gosh they were hard to turn at first but gave in a few moments after I sprayed their internals.

As a result I got a perfectly working pedal that sounds awesome and is ready to rock now whenever I am [emoji1591]
Now I need to get back home where I have a decent Hakko soldering station and replace a malfunctioning volume pot on my Champ 600, but that’s another story [emoji1316].
This is great and reminds me to service my pedals soon…
-
Best can opener on a multitool!


-
It’s been a while, but yesterday instead of doing my work related tasks I wandered around searching for something cooler to get my hands on [emoji38]
This is how I found and fixed a bathroom door lock that for some reason started to malfunction and get jammed sometimes for no obvious reason.
After partial disassembly with a Spirit Plus ratchet I’ve found out small pieces of wood left after door handle installation that must have caused the issue. WD-40 made a short work of making it butter smooth and fully functional again [emoji1316]

-
@Grand_Banana said:
This is great and reminds me to service my pedals soon…Cool, yet another guitarist among us here [emoji1316]
I’m actually thinking of maybe building some pedals myself. The only issue is that I’m a seasoned user and looking for something really unusual and that’s hard to come by in a form of a DIY kit. And a kit is my only option since I’m no professional and would hopefully only manage to successfully assemble a kit [emoji1]
-
@alexanderre said:
Cool, yet another guitarist among us here [emoji1316]I’m actually thinking of maybe building some pedals myself. The only issue is that I’m a seasoned user and looking for something really unusual and that’s hard to come by in a form of a DIY kit. And a kit is my only option since I’m no professional and would hopefully only manage to successfully assemble a kit [emoji1]
bass is my passion. It’s been several years since I’ve really played, so my pedals have been in storage. Should get them out. I’m happy with boss pedals. Had a DS-1 for almost 20 years now. -
Bass is even better - always wanted to get a bass and learn to play it with a bassist's mindset

Boss are a gold standard of course 👍
I also don't play more than 20 minutes a month, but back in a day I thought it'd become my occupation 😀 -
@Grand_Banana said:
:cheers: bass is my passion. It’s been several years since I’ve really played, so my pedals have been in storage. Should get them out. I’m happy with boss pedals. Had a DS-1 for almost 20 years now.@alexanderre said:
Bass is even better - always wanted to get a bass and learn to play it with a bassist's mindset :cheers:
Boss are a gold standard of course 👍
I also don't play more than 20 minutes a month, but back in a day I thought it'd become my occupation 😀I agree with you guys!
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
-
@pfrsantos said:
I agree with you guys!- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
:cheers: not expecting that video :rofl:
-
-
Hi ! I have been using my Leatherman multitools for over 20 years. I have 5 of them. A Wave and 4 Micras. I have a small farm and my blueberries and strawberries have netting over a structure that holds up the netting and the Micra is great at cutting the zip ties I use to keep the netting and structure together. It has the best scissors of any Multitool I have used. Not a single day goes by that I don't find a use for it.
-
Welcome to
KBPWave and Micra are great carries

-
CRKT Guppie helped to change the battery of my trusty GMT400:

Sent from my iPhone using Tapatalk
-
A gargantuan can of nacho cheese presented an excellent opportunity for testing some can openers.
[attach id=0 msg=2410696]

-
I’ll post it here as well if you gents don’t mind [emoji2]
Busy day for my Spirit X Plus
First I used it to unpack a box of herbal tea (no photo taken), then I cut some dill with the main blade

After that I discovered that a bathroom ceiling light that I only replaced a few months ago went almost completely dead [emoji20]
Used a ratchet to unscrew the chassis of the light from the ceiling and Spirit’s small flathead to disconnect the wiring


Will hopefully have that light replaced under warranty tomorrow [emoji1316]
-
Great uses and pictures

-
@in_sympathy said:
I’ll post it here as well if you gents don’t mind [emoji2]Busy day for my Spirit X Plus
First I used it to unpack a box of herbal tea (no photo taken), then I cut some dill with the main blade

After that I discovered that a bathroom ceiling light that I only replaced a few months ago went almost completely dead [emoji20]
Used a ratchet to unscrew the chassis of the light from the ceiling and Spirit’s small flathead to disconnect the wiring


Will hopefully have that light replaced under warranty tomorrow [emoji1316]
One thing that crossed my mind recently is that most of the things we buy these days are disposable. Either due to an attempt to cheapen the production or for any other reason almost nothing is built to last nowadays. Unlike SAKs and Swiss Tools. That’s what I think of every time I use those pieces of engineering awesomeness [emoji1316]
-
@in_sympathy said:
I’ll post it here as well if you gents don’t mind [emoji2]Busy day for my Spirit X Plus
First I used it to unpack a box of herbal tea (no photo taken), then I cut some dill with the main blade

After that I discovered that a bathroom ceiling light that I only replaced a few months ago went almost completely dead [emoji20]
Used a ratchet to unscrew the chassis of the light from the ceiling and Spirit’s small flathead to disconnect the wiring


Will hopefully have that light replaced under warranty tomorrow [emoji1316]
Warranty replacement and a new light installation complete [emoji736]

-
@in_sympathy said:
One thing that crossed my mind recently is that most of the things we buy these days are disposable. Either due to an attempt to cheapen the production or for any other reason almost nothing is built to last nowadays.
That's why I hate electronics and modern small appliances; when they break, it's cheaper to buy a new one than repair what you have. And it boggles my mind how Victorinox can continue to offer a product of such high quality at such a low price, even with inflation being what it is. Better yet, it's been my experience that they stand behind their products. They really are a notable holdout in the trend toward cheap, disposable crap. -
Carrying the Curl today, only thing I've used it for was to get rid of a steel protrusion off a shelf. Was straightening up gallon oil and caught it on a bottle resulting in a mess. File on the Curl handled the offending steel assailant quickly
Sent from my SM-G996U using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login