Swisschamp owners club
-
@Buzzbait said:
I just broke out this beauty today, to take some pictures for the 2023 Champ Challenge. I believe this is a first generation SwissChamp. I’m not an expert, but it has all of the hallmarks that I know of.It would be perfect if Reginald Seymour Dillydally hadn’t had his initials put on the rear scale. Actually, I can’t complain. Reginald was kind enough to place this knife and pouch in his bedside drawer, and never use them for almost 40 years. I don’t know if that’s his real name. It could very well be Rudolph Sherlock Droopydrawers.


Nice pictures , Buzzbait !

-
@Buzzbait said:
I just broke out this beauty today, to take some pictures for the 2023 Champ Challenge. I believe this is a first generation SwissChamp. I’m not an expert, but it has all of the hallmarks that I know of.It would be perfect if Reginald Seymour Dillydally hadn’t had his initials put on the rear scale. Actually, I can’t complain. Reginald was kind enough to place this knife and pouch in his bedside drawer, and never use them for almost 40 years. I don’t know if that’s his real name. It could very well be Rudolph Sherlock Droopydrawers.


To Mr. Droopydrawers for keeping that baby in such good shape. That is a cool specimen Buzz 
-
My old SC was quite beat up. Bent tip on the small blade, damaged edge on the scissors, bad corrosion on the liners from a dunk in the sea

[attach id=0 msg=2407371]
My Alibaba 2.2mm brass rod eventually arrived, so I decided to rebuild the SC, and replace the damaged small blade and scissors, and also swap out the file for the newer version that''s more effective.
You can see the components are in bad shape....
[attach id=1 msg=2407371]
I used some OO steel wool to strip all the corrosion off the liners, and it also polishes at the same time. I then assembled all the liners together as a sandwich with a couple 2.5mm bolts and ran the stack over sandpaper until I got all the edge pitting removed. Polished up the liner edges, back springs and tool pivots with a Dremel and small polishing wheel.
Here''s the SC with all the layers rebuilt, ready for peening.
[attach id=2 msg=2407371]
All done...I always worry about cutting the pins the right length. Too short and you cannot get the peen to fill the rivet nicely, or too long and the peened head ends up too large.
[attach id=3 msg=2407371]




-
Some new Plus scales and ready for service!
I do like the smooth back you get with the old design without the hook. And the grooved CS. Also note the early round micro-screwdriver and the key ring in the original side location.
[attach id=0 msg=2407374]
[attach id=1 msg=2407374]
[attach id=2 msg=2407374]
[attach id=3 msg=2407374]
Just a side note...don't try the Vctorinox marketing picture tool layout like I did above, as it puts extra strain on the back springs as you're loading up multiple tools. I've done it before with newer SAKs, but it weakened the opener layer back spring on this SC. I've still got snap, but the tension is definitely a little less that it should be. Not enough to warrant a rebuild (again), but lesson learnt - don't partially open multiple tools on one layer, especially layers with back tools...




-
Nicely done. That is a ton of layers to stack back together!!!
-
That cleaned up exceptionally well Max. Good work! -
Thanks Enginears

-
Great job! I always love to see the old warriors brought back to life

-
Thanks Barry

-
Great work there, Max - that looks stunning now!

-
Thanks Rizio Il Ghiro

-
Hi everyone, I own a 1.6795.XXLT but the flame doesn't work, is there someone interested?
Thank you, and have a nice day to all of you -
They can be fixed, but one of those 50//50 things. Some collectors are not too bothered with the lighter not working, as it's a known problem. I'm sure you'll get offers

-
Thank you a lot Max Stone!
I sent an email to Victorinox asking if they take care of it
Have a wonderfull week -
Well, I guess I have to get Hofritz out of his (her) storage space too. Grooved CS, grey mag glass, round mini driver, gold wore off hot stamp but still readable.

-
Probably Blackie around the house today.

-
Same here Tony

-
The grooved cs and grey mag make it what? 80s ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login