March Rebar challenge
-
Man alive, this has been a great challenge. Congratulations to those who have earned the badge!

Day 29
We have a furniture suite that is pretty nice, but has drawer pulls that are made of cheap pot metal. Those things break if you cough on them. Today I used the Phillips screwdriver to switch a couple of them around. Now the broken one is hidden from view. I took an action shot, but it came out horribly blurred.

[attach id=0 msg=2407856]

-
Great job Dan and I agree with you on the Challenge! 2 more days and I'll be there with you guys.
I've carried the Rebar off and on for quite awhile. I love it's weight and tool set. It's an updated PST for me. I think I could get by with just it for most of my uses. One rode on my duty belt for a few years before I swapped it out for the larger Swiss Tool RS. My favorite parts are the cutters and those wickedly sharp blades. I do wish it had the same grade of steel as the Wave for the drivers. I probably use the blades for 98 percent of the uses I encounter so a OHO would be better for me, or a tool set that can be opened from the outside, but I enjoyed carrying it in this challenge. I've been wanting to do this one for ages, but I'm glad I did it with you guys as it was a great time!
Day 29 is just a vanity pic as we spent the day on the road.
-
Day 30
Used the Rebar to open a package!
May I have my first badge please?

[attach id=0 msg=2407862]

-
Day 31
Rebar used to open a package but preferred these photos instead

Been an excellent challenge even if due to injury i didn’t get as much action with it as I’ve had liked
The Rebar became an instant favourite when I got my first one a few years back, like Barry says, it’s a lot like an updated PST to me too
For the size and weight it packs a lot in and I find more comfortable in use than my (new) Wave, although I prefer the OHO of the wave. For edc it’s a winner
Thanks fellow challengers for a most enjoyable month and many thanks to FX for organising it

On to the Swiss Champ challenge tomorrow should also be a good one. Love to see you all in the vintage SAK challenge in May



-
Great pics Echo and see you in the Champ Challenge!
-
Thanks Barry

-
More great pics all and badge awarded to Echotech
Congratulations

@MichaelGT83 said:
Just in case you've not seen it, instructions on how to formally request the badge are here.
/topic/59292
and thabks for that link, Michael
I totally forget that many here still haven't went through that process for requesting a badge and I am glad you thought to put the link

-
Thank you good Sir

-
Day 31
Last shot and bonus day as we sat goodbye to this challenge. It has been great! Will request my badge later.

Congrats, everyone. Great challenge!!!

-
Congratulations everyone!
-
Me, too. Awlways great to see Coco!

Day 30
I agree with the assertion that the Rebar is more evolutionary than revolutionary. So here are some photos of it alongside a JPST.
[attach id=0 msg=2407922]
[attach id=1 msg=2407922]
We see that the Rebar gained a saw and a serrated blade on top of the PST's loadout. I guess whether the locking blades and tools are good or bad is at least somewhat dependent on one's location. The PST and Rebar are close in terms of length, but the latter is thicker and a little heavier. One nice thing about the Rebar that I don't recall having been mentioned is the locking teeth for the pliers. A concerted effort is needed to fold them up.
[attach id=2 msg=2407922]
Now, the not so great: the sheath. Two years ago, this would have passed muster with me. Not anymore. I like sheaths that ride low. The one supplied with my Rebar sticks up a little high for my liking. I have a Leatherman sheath that does not do so, but it's a little big for the Rebar. I need to definitively determine the size and production status of that sheath.
All said, the Rebar is a great tool. It'll be my go-to Leatherman for tasks around the house. Maybe I'll get myself a black oxide one someday.
A big thank you to my fellow challengers as well!
This was a great group. Y'awl had a whole bunch of superb photos and uses. I'm sure I'll see many of you in future challenges, but if I were to call it good with this one, I'd be ending on a high note. It was a pleasure to organize the challenge! 
Badge will be requested shortly after I push the "post" button.
.jpg)
.jpg)
.jpg)
-
@MichaelGT83 said:
Just in case you've not seen it, instructions on how to formally request the badge are here.
/topic/59292
Excellent, thank you! I appreciate the link!

-
Pretty sure I requested the badge correctly. Phone was being wonky so yeah.
-
-
Excellent comparison Dan!
-
Thanks, Barry! And thanks to whomever got me badged so quickly!

-
In reflection, my REBAR affair maybe a bit backwards.
I actually was gifted a WAVE in 2004, by my son. I never used it, as dedicated tools assigned to specialized kits were always my goto solution in my delicate equipment repair career that started in 1973 servicing computers and Peripheral equipment after college.
Then due to mergers and acquisitions, I was out of work due to be too costly for my employers as experience was no longer an asset. So, I found a new career in a form of construction and maintenance of parking equipment and structures.
At Lowes one time I found a ST300 for less than half price. Put it on my belt and learned to use this new Multitool to provide solutions by just being on my belt when needed.Via MTo, I found others with similar passions, and when bragging about my luv for the ST300, and a wish for a smaller alternative when not at work, I recall Poncho introducing me to the REBAR, as a little ST300. The rest is history.
Four REBARs, three in use and one still in the package, I yet find it a solid tool, and trusted assistant on many a task.
Lately I have come to know the PST and can only appreciate that is is the ancestor to my ST300 and REBAR MTs.
I do also have two Spirits, but the REBAR gets the pocket duty always!
That is my story of my luv for the REBAR and it’s toolset. Unmodified, just as it was manufactured. Simple and proven. 😉❤️
A previous picture shared from a couple years back [attach id=0 msg=2407960]

-
@LoopCutter said:
In reflection, my REBAR affair maybe a bit backwards.I actually was gifted a WAVE in 2004, by my son. I never used it, as dedicated tools assigned to specialized kits were always my goto solution in my delicate equipment repair career that started in 1973 servicing computers and Peripheral equipment after college.
Then due to mergers and acquisitions, I was out of work due to be too costly for my employers as experience was no longer an asset. So, I found a new career in a form of construction and maintenance of parking equipment and structures.
At Lowes one time I found a ST300 for less than half price. Put it on my belt and learned to use this new Multitool to provide solutions by just being on my belt when needed.Via MTo, I found others with similar passions, and when bragging about my luv for the ST300, and a wish for a smaller alternative when not at work, I recall Poncho introducing me to the REBAR, as a little ST300. The rest is history.
Four REBARs, three in use and one still in the package, I yet find it a solid tool, and trusted assistant on many a task.
Lately I have come to know the PST and can only appreciate that is is the ancestor to my ST300 and REBAR MTs.
I do also have two Spirits, but the REBAR gets the pocket duty always!
That is my story of my luv for the REBAR and it’s toolset. Unmodified, just as it was manufactured. Simple and proven. 😉❤️
A previous picture shared from a couple years back [attach id=0 msg=2407960]
Great story Bro.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login