BuckTool collectors unite.
-
@THE_LONGBOW said:
So if any of you with 360 First Production Run tools could look and see if yours has reverse icon I would appreciate it. If yours are sealed please "do not open" them.OK. Both of my 360 FPR's are opened, so I had a look for you. Both of mine are different to yours, they are the same as the other early 360's I looked at ie they have the small philips icon in the 3rd spot and the large philips icon in the 4th position (which accurately reflects the positions of the actual tools). One is number 034 (of 400) and the other is 087, so were labelled either side of yours (but that doesn't mean the actual build sequence was bracketing your # 075)
I think you can safely assume your "reversed philips icons" 360 is indeed a truly rare bird
Are the tools reversed as well ? (somehow I doubt it) -
Thanks for the info gregozedobe, that answers my question with out opening my sealed packs. The tools are in the correct order in the handle.
According to the Buck information I have there were under 2000 of these reverse icons made, but not sure exact numbers. I think the number is way less than that. There were around 2000 Harley Davidson BuckTools made and they are not too difficult to find. -
Another 360 BuckTool I picked up recently.
Budweiser (a USA beer) etched, most likely a salesman sample.
-
Hey Chaps
I just came across the Buck 732 MTs elsewhere on the net - They look like really nice innovative designed MTs
Then I found this thread with a few other Buck MTs
Till now I was only familiar with the SwissBucks other than Buck single blade modelsI just had a quick look on their site and they do not seem to have MTs anymore - Is that the case? Can someone enloighten me plesae?
-
I just came across the Buck 732 MTs elsewhere on the net - They look like really nice innovative designed MTs
Then I found this thread with a few other Buck MTs
Till now I was only familiar with the SwissBucks other than Buck single blade modelsI just had a quick look on their site and they do not seem to have MTs anymore - Is that the case? Can someone enloighten me plesae?
Bucks multitools called were BuckTools. They came out in 1996 and were made until 2000. The models included the 360 BuckTool (largest), the355 BuckLite (medium), and 350 MiniBuck. All discontinued in 2000. SwissBucks came out in 1992 and were discontinued 1996. The 730, 731, 732, and 735 are all variations of the X Tract, These models ran from about 2007 until 2013. The X Tracts were imported. The only tool Buck Knives still makes is called the BowTool, that is aimed at archers. Hope this helps.
-
I did not know about the Buck 737 Bow Tool...and it is now also discontinued.
-
...
-
@THE_LONGBOW said:
Bucks multitools called were BuckTools. They came out in 1996 and were made until 2000. The models included the 360 BuckTool (largest), the355 BuckLite (medium), and 350 MiniBuck. All discontinued in 2000. SwissBucks came out in 1992 and were discontinued 1996. The 730, 731, 732, and 735 are all variations of the X Tract, These models ran from about 2007 until 2013. The X Tracts were imported. The only tool Buck Knives still makes is called the BowTool, that is aimed at archers. Hope this helps.Thanks for this info TL and the other responses folks!
Just realised I should have checked this in our own Multitool Encyclopeadia - I just did - And some of the inforation is there - But looks like it needs a bit of an update
Also just noted that the X-Tracts feature in this thread ..... even on this very page
Gotta say I do like those X-Tracts - Maybe see if I can pick one up on the Bay.
-
Took this screen shot of an advert in The National Locksmith magazine from 1997.
[attach id=0 msg=2408462]
-
-
A BuckTool advertising board given to me by a good friend.

-
Great looking board!
-
Hello and salutations Bucktool enthousiasts.
I bought a strange Bucktool of interest.
It was an ebay-purchase from a collector.
It concerns the bucktool as pictured in the middle of the images below.
Let me summarize:- the plierhead is black
- whilst the body is standard stainless
- it has no markings on both handles
- the pivot mount has the added bump like in later models as seen on my Harley and Camouflage versions.
- there is a lanyard hole instead of a philips
- the plierhead has 1 dot, just like my full black bucktool
- the pivot bolts have rounded tops instead of the regular flat tops. (4th image)
- the entire build and workings are the same as my other bucktools, it is legit.
- All tools exept for the lanyard hole are identical to the classic bucktool.
So what could this bucktool have been meant for? a rebrand? a special edition? WHAT A MYSTERY !!! :D




-
@GotBluntnose said:
Hello and salutations Bucktool enthousiasts.
I bought a strange Bucktool of interest.
It was an ebay-purchase from a collector.
It concerns the bucktool as pictured in the middle of the images below.
Let me summarize:- the plierhead is black
- whilst the body is standard stainless
- it has no markings on both handles
- the pivot mount has the added bump like in later models as seen on my Harley and Camouflage versions.
- there is a lanyard hole instead of a philips
- the plierhead has 1 dot, just like my full black bucktool
- the entire build and workings are the same as my other bucktools, it is legit.
- All tools exept for the lanyard hole are identical to the classic bucktool.
**So what could this bucktool have been meant for? a rebrand? a special edition? WHAT A MYSTERY !!! ** :D
Given the lack of markings on the handles I'm leaning towards a Buck employees custom, set up just the way they like. Maybe there was a black plier head surplus to production requirements and they were given that to use for their project ? Or possibly a prototype for internal use built to see how a different toolset (lanyard ring) worked as an EDC.
-
Wow! Great find!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
