My 3DC
-
The guy who sent then designed it and had it in a Zippo

It looked really awesome

It is probably for the LM flat bits
I forgot to mention that :ahhh :D -
It may look a bit ugly at first, but with some sanding to get the glue stick residue off it, I think this Apple AirTag MOLLE attachment is quite handy.
It actually has two pieces- the main body as shown in the pics, and a retention ring that keeps the AirTag in it.
The retention ring doesn't seem to actually fit, but that's okay as the AirTag snaps in quite solidly and the strap holders are so tight that the holder won't come loose from the strap without a fight.
If you decide to print this one, don't bother with the retention ring. :D
Def
-
Oops, forgot the pics!

Def


-
Good idea with that holder

-
I like it because you really can't see that there is a tracker hidden inside. My thought is that if i cleaned it up and put a sticker or something on it then no one would think there was an AirTag inside it at all- it would just look like a fancy decorative thing.
I'd thought of also getting a military rank pin or something and mounting it on there, which would encourage the "nothing to see here, just a fancy bauble" type mentality.
Def
-
You could definitely make it blend in on a pack

-
I have been printing a bunch of things lately- I've tried a couple of whistles, but so far none that actually make noise, another watch stand (a duplicate of the second, smaller stand because I am running out of filament) and I am printing some glasses holders for my Dad since he keeps misplacing his glasses.
I have more filament on order, so with any luck I will have a more photogenic color soon! :D
Meanwhile, I was so disappointed in the Surge sheath and so thrilled with the MP600 sheath that I decided to try one for the Wave.
I picked this one for really no other reason than it came up first in the search: https://www.thingiverse.com/thing:1682943
It printed beautifully, with no issues, and if I'm honest, I really like the texture of 3D prints, especially for things like this. The PLA plastic is slick, but at least the ridges from hundreds of layers of plastic provides a nice texture for grip.
I don't have any pics of the Wave in the sheath right now, but I have test fitted it and it fits very nicely. I held it upside down and shook the crap out of it, and at no point did I feel like the Wave was going to come out. Yet, when I wear it on my belt and want to draw it, it comes out very easily. It also returns to the sheath very nicely.
The only issue I have, and this is with all plastic sheaths, not just this one- is that if you whack your fingers on it, it hurts.
Also, depending on what you drive and where you wear it, the hard sheath can dig into your hip or back when sitting in a chair or a car.
And, as this one has a closed belt loop (which just barely fit my belt) there's no easy way to take it off without risking a 3 Stooges moment.
Again, these are generic problems with any hard sheath and shouldn't take away from this one- as far as hard sheaths go, this one is actually pretty sweet, and I would absolutely print it again.
I'll get more pics today- I promise!
Def

-
As promised, here are some photos, and I apologize for the one photo where I obviously haven't been keeping up with my Buns of Steel VHS.
It fits this 2004 Wave beautifully, but I haven't tried it with an Original Wave or Wave + yet. I can't imagine there would be too much of a difference.
Def




-
And, unlike the Gerber and Surge sheaths, this one is labeled to remind you of what it's for! :D
Since I am already posting photos, I might as well also show the first glasses holder I printed for my Dad. That STL comes in three sizes- the big one is too big for my machine, the medium size just fits and no more, and this is the small one. In case it isn't obvious, the glasses sit on the nose with the folded legs going into the slot in the middle. When he is wearing the glasses he looks an awful lot like Elton John!
I'll print a few more for him, so that he has one in all the obvious spots in his house, and then maybe he will put them in the holders rather than just putting them down in any old place and not being able to find them again.

Def


-
I decided to have a bit of fun with the glasses holder guy.
Megan pointed out that I used two different googly eyes (I hadn't noticed when I pulled them out of the package!) and I think its hilarious and I'm just going to run with it.
:D
Def

-
I know it was probably culturally inappropriate of me to do that, but in my defense, it's damn funny!
Def
-
I've been making a lot of spaghetti monsters lately, but I think I am getting it back on track.
Last night I made a grappling hook for one of my drones, just in case I ever get another one of my drones stuck somewhere!
This morning I fired up the machine again to try making a sheath for the Skeletool, you know, because the Skeletool already has a pocket clip and a carabiner and that's not nearly enough ways to carry it! :ahhh
This one worked out well, and fits the Skeletool very nicely. As a bonus, it is also big enough to fit on my belt, and so that makes it far superior to the Surge sheath I tried earlier!
I'm not sure this is how I would choose to carry the Skeletool, but if one wanted a hard sheath for it, they could do worse than this one.
That said, this was a bit of a messy design, requiring several supports that I'm pretty sure wouldn't have been necessary if the designer had put even a little thought into it. For one, the belt loop is squared, stuck to the back, and raised enough that it needed a support that was almost 1/4" high. If it had been angled out form the body of the sheath rather than 90 degrees, it wouldn't have needed a support. Additionally, the model was oriented sideways, which would have required even more supports. If you try this one, make sure to reorient it first.
I also find the edges/corners a bit on the sharp side, so it may have been nice if they'd been rounded off a bit.
Def




-
Very cool. I have thought about getting a 3D printer.
I know our local library has one that patrons can use. I plan on finding out the rules so I can experiment on it, before purchasing my own.
-
I think you will find they have become remarkably affordable. There is one model at a large, blue electronics chain that is available for less than $100, and at that price there's really not much stopping anyone from giving it a shot.
Def
-
Just to update this a bit- the Wave sheath fits the 2004 Wave (Second Generation) and the Wave + but not the original Wave.
Def

-
Some time ago a coworker asked me if she designed a candle mold, could I print it for her. I asked what kind of candle mold she wanted and she said one that would make these candles for a UCO candle holder.
After a quick search on Thingiverse I found that someone had already designed these molds so she didn't have to. It blew her mind that this kind of thing existed!
I printed off a mold for her and asked her to let me know if it worked. She just sent me an email thanking me for the mold, and that it worked so well she wants me to print a few more for her so she can make three candles at a time.
This is the joy of a ,3D printer- spending a few hundred dollars to save the cost of buying a $15 item.

Unfortunately I printed them in almost the exact same yellow as the beeswax she was using, but you should be able to figure out which is which!
Def




-
One more pic.
Def

-
I've got a little bit of a milestone for myself today- I have finally designed something from scratch that I then managed to successfully print.
I wanted a small holder for a Tile Sticker to put on my dog's harness.
As my dog is VERY tiny (he's filled out to about 13 pounds) I wanted a smaller Tile than the Mate he was wearing, so I got a sticker. I'll have some comments on that in the url=/topic/90573]Tracker Thread[/url] shortly, but, like the Airtag, there's really no direct way to attach it to his harness, so I decided to make one in Fusion 360.
I'm not overly skilled in Fusion 360, so it probably took me a lot longer to do it than it would for someone who knew what they were doing, but I'm proud of myself nonetheless.
Also, the final product really won't work as I didn't take into account the small button on the side of the Tile Sticker.

So some redesign will be necessary, but that doesn't take away the cool feeling I have from making something completely from scratch.
Hey, I know it's a little thing, but I'm counting it as a win anyway.
Def



-
Third and final (for now) version!
I'm pretty darned happy with this newfound superpower of creating something from nothing! :D
Def


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login