What did you use your Leatherman for today?
-
I used my Wave saw and file for making a makeshift tools from one time use chopsticks, so that I can clean the corner of a bottle as in the image


-
I noticed my hose cart was leaking. I used my Rebar Phillips to take it apart and tighten up the fittings. The Rebar Phillips was able get to the recessed screws where my Wave would have been useless. The Rebar is my go to multitool now, I just love the simplicity and non pinchy pliers compared to the Wave. I will have to get in on the next Rebar Challenge.

-
@Steelej1976 said:
I will have to get in on the next Rebar Challenge.
Definitely. As great as last month's Rebar challenge was, I'll be back for another!

-
Wishing you all a happy weekend

I've repaired a door bolt latch thingy today with the ST300 doing most of it. Looks like it wasn't installed very well in the first place. And while the door warped over time the stress on it grew. So it moved and bend out of position and the slim sheet of wood cracked. Maybe something else happened too here

Pliers were used to bend it into form again and to assure all is back in place...


Some wood had to be removed to make it sit flush in...

Now I needed an idea how to improve the stability of it because gluing the wood back on and using new screws would not be enough I thought. Luckily I found a spot at the latch where I could pass a screw through without blocking the mechanism. Holes were drilled and a suitable screw found...

Glued the wood back together...

Screwed it all in...

And it works....

It's rock solid now!
-
You've reached your manly quotient for the week. No more manliness for 7 days please.

-
powernoodle...that'd be great... I could do with some more days off...

-
What a great repair, McStichy. That turned out very well. You should get your Boy Scout Home Repairs Merit Badge for that one.
JonesE
-
Great job on that repair!
Hope you've been having a great weekend, too. -
-
-
I used my Wave+ phillip screwdriver to install 2 screws on my wooden door frame so I can hang a pull-up bar. Stay strong brothers 💪
-
Moving time! I wasn’t a member here, nor did I really ever think about documenting my uses, when we moved into this condo (or when I split time and moved between here and my work apartment). Now that we’re moving out, I’m reminded of all the things I used my Wave kit to setup as I’m using it to tear down.
Full setup while we move, but only used the Wave so far today on the furniture.
[attach id=0 msg=2418598]
We put together a number of pieces from IKEA, and most had to have a tip kit installed. An example here is this 7ft tall book shelf I dismantled.
Tools used: pliers to pull the pins on 2 kits as well as some stubborn pegs and throughout, LM and 711L ratchet drivers with P2 and 4mm bits on the tip kit and bookshelf screws, LM PZ1 and 4mm slotted on book shelf screws, serrated blade to cut the bubble wrap.
[attach id=1 msg=2418598]
Bonus holster shot. Best LM sheath in my opinion for the pliers-thru slot.
[attach id=2 msg=2418598]



-
We just bought a log cabin home in a wooded area in New England. I have been using the Rebar and Surge a lot, among other "real" tools more suitable as needed.
Most recently tore up living room and hallway carpet. We will be laying ceramic or planking. Had to get all those big staples out, and those little copper/bronze narrow, long staples. Rebar and Lady Beagle used her Wave
-
Lady Free P4 and I decided to see what the inside of my asthma inhaler looks like.

And now we know!

-
Great uses everyone, that is quite the collage GB
@powernoodle said:
Lady Free P4 and I decided to see what the inside of my asthma inhaler looks like.
And now we know!

Interesting. The pry tool/package opener is my favorite thing about the Free series

-
Sometimes I remember to document the work… like today. Had to redo a baby gate as the baby figured out how to push the bottom out enough. Got some use out of the Wave and ratchet and my Electrician awl to resize mounting plate holes for larger drywall screws. Also got to use the Volty Switch to check for wiring before installing a fire alarm mounting plate.



-
Awesome pics and uses, peeps

-
Another set of great uses, GB 
-
I needed a "third hand tool" to steady my lighted magnifer, to perform a nib inspection and tune up. Its 2100 hrs here and no shops are open or noises allowed that might bother neighbors so, what to do?; get the Surge, ratcheting driver, small holesaw, and a scrap piece of PVC board and... presto!
[attach id=0 msg=2438404] [attach id=1 msg=2438404] [attach id=2 msg=2438404]Edit- the Surge's saw cut the board, the file deburred the edges, the awl removed the plug from the holesaw, and the bit driver ... well ... took care of the ratcheting one!



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
