What's your latest flashlight?
-
@GearedForwards said:
What features are giving you pause?The PM2 pocket clip isn't as strong as the PM and it doesn't fit the velcro holder patch. The tail magnet is also WAY weaker than on the PM. The PM2's slash-cut knurling is also notably slippier compared to the pineapple grenade texture of the PM.
-
@Tasky said:
The PM2 pocket clip isn't as strong as the PM and it doesn't fit the velcro holder patch. The tail magnet is also WAY weaker than on the PM. The PM2's slash-cut knurling is also notably slippier compared to the pineapple grenade texture of the PM.Huh I didn't know about the patch thing, how come it doesn't fit?
Is the strength thing because the clip freely rotates vs sitting in a cut groove to lock it in? I've not noticed any retention issues or it popping off the light so I'm not sure what else this could be.
I don't have anything with the pineapple knurling, but I think I'd rate the PM2's as good if not a bit better as the dash-style knurling that's on the Warrior 3S, Warrior Mini, Baton series.
If you're unsure, you can always pick up the original mini, since you already know you like it?
-
@GearedForwards said:
Huh I didn't know about the patch thing, how come it doesn't fit?
Is the strength thing because the clip freely rotates vs sitting in a cut groove to lock it in? I've not noticed any retention issues or it popping off the light so I'm not sure what else this could be.
I don't have anything with the pineapple knurling, but I think I'd rate the PM2's as good if not a bit better as the dash-style knurling that's on the Warrior 3S, Warrior Mini, Baton series.
If you're unsure, you can always pick up the original mini, since you already know you like it?The new PM2 pocket clip is a mil or two wider, so doesn't fit inside the barrel pivot.
The initial upward leg of the clip is braced right up against the back of the head, so the clip strength is purely down to that first bend. It grips OK, but is notably easier to pull off the pocket edge than the PM... and since that's how I lost my last one in the first place, it's a point of concern for me.
The slash-cut is basically the same as the dash-cut, in that your fingers can hold the barrel really well longitudinally (great for longer torches), but if you're having to grip the light with any force, your fingers slide around the width of the tube and you can easily drop it. The grenade knurling worked very well in both directions.I may well go get another PM eventually, but even at £45 the PM2 was an expense I didn't need at this time, so another PM1 at £65 would be a very stupid thing to do.
If I really can't get on with the PM2, I have plenty of other torches to pick from... Fenix's E18R or their HM50R v2 are both lovely EDC pieces that I like to swap in occasionally. -
@m47mu74nt said:
Being utterly disappointed with Lumintop D1 UI, I got myself an EDC18 (Anduril), in the only version left : copper.
But copper is REALLY heavy, and I don't like the blue accents much ..1/ added glow gasket
2/ removed the bunny (thx to https://www.reddit.com/r/flashlight/comments/gujw5x/edc18_modbunny_delete/) but I had some trouble with it, started with 2500grit not to scratch the rubber boot, but had to go gown to 800 to really start remove the Bunny... so it has some scratches :(
3/ swapped the blue ring with the silver one from D1sanded down the blue metallic ring around the button (pics where taken before)I still need to swap the emitter with 3*LH351D 2700K LEDs
Quite happy with the result :)
So I pushed my luck a little more, and swapped the emitter, not with 3 Samsung LH351D but Nichia 519A 2700K LEDs.
used a very little hotplate, bought specifically for the job, I wouldn't risk these with a candle based ghetto reflow.jpg)
.jpg)
.jpg)
.jpg)
-
Reylight LANapple

-
@Gareth said:
Just got it in this afternoon. In it's 10180 form it has to be the cutest little light I've ever seen. :D First impressions are good, but I'm also a bit concerned by the battery life. We shall see if it's a problem in real life (and for my uses). I do find the illuminated switch an...odd (?) choice given the tiny cell capacity. I will be using the 10440 tube for the moment though. You can, of course, lock it out by giving the head a slight twist, but that gives you quite a faff of work to do in order to get your light on when you need it.I managed to turn off the switch light. I forgot what I did, but acquired to this pic, it should be 7 clicks from Off

-
@GearedForwards said:
Arkfeld is a cracking light
For what it's worth I've never had it come on whilst having it in my pocket for fitness walks
After several weeks of carry, I am no longer concerned that it might activate in my pocket. I like just about everything about the light, and its nice to have a laser to play with.

-
-
-
Anyone has/knows about the performance of LEXMAN flashlights? In particular these models:
LEXMAN 525LM micro USB (€12.99)


LEXMAN 1200LM-360LM (€14.99)

LEXMAN 450LM (€14.99)

-
Well, I might be answering my own question soon. Just bought this one:
LEXMAN 1200LM-360LM (€14.99)

This thing is a beast! Goes from 18cm to 20cm, using the zoom. Built like a tank. Feels strong enough to be used for battoning!

I'm going to look for some rechargeable batteries for it and will let you know how it performs after some use.

-
I have no knowledge of this light. I hope its a keeper. -
Looking at price and advertised power, no worries, the LED will be a vomiting cold white with green tint and awful corona :(
and poor battery-life with 4AA -
@m47mu74nt said:
Looking at price and advertised power, no worries, the LED will be a vomiting cold white with green tint and awful corona :(
and poor battery-life with 4AABatoning aid it is, then!

I was just looking for a strong light to keep in my car. Probably won't get much use, unless it's not that bad and then I'll keep it around the house. I'll let you guys know when I test it.

-
I won't say I don't keep a (very) bad flashlight in the car

(along with a good one, but the bad one has a specific purpose : being handed to anybody that need something to see in the dark without worrying of not getting it back
) -
Wurkkos TS11, impressive light : super throw, Anduril2, RGB button and aux
I love it (but it won't be an edc
).jpg)
.jpg)
-
Holster carry? That is some serious throw.
-
Windmill slam that thing in a backpack and put it to work!
Great looking light.
-
My new EDC, Fenix PD25R.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login