Vintage SAK 30 day challenge May 2023 (SAK’s from 1986 and earlier)
-
Day 4:
Getting the blade of the Bijou a bit sticky from the tape on all this little packages. Very nice toys arrived for me, Knipex Cobra xs (its tiny but feels solid), Kaweco Sport AL rollerball pen (light, compact, elegant but rustic), a Clipper metal (love the refillable idea, quite heavy, its the better bic imho) and a single butane torch insert for my good old leaky zippo (with a brewery on it that doesnt exist since the late 90s, local german)

-
Day 4 - Using the late 60's Victorinox Salesman to cut up a snack.

-
Day 4
Cutting bread for sandwich with OC Solo (early 70s)

-
Just a quick suggestion to my fellow participants in this 30 day challenge. If you can, each participant could make a small donation to help fund the forum and the SAKWiki. I know that I've used the SAKWiki a lot recently to date the knives I am carrying for this 30 day challenge. This would help to promote the hobby that we all enjoy.
The 47-52 Spartan/Standard picture below will be my next edc in rotation for the 30 day challenge.

-
@m47mu74nt said:
"very modern" spring won't work as they are designed to get into the groove
but older V leaf spring will get in(second from the left below)
You may want to cut/flatten the end of a modern spring too
Thanks M47

Much appreciated- I’ll give that a try.
Cheers
-
you're welcome :)
-
Day 4, cut open my Chicken Salad Sandwich

-
<u>DAY4</u>
Used the early 70's windsor to cut ripped off flesh hanging of my finger


-
@pa_strunk said:
Day 4, cut open my Chicken Salad SandwichMakes me wonder : how old it is ? I always assumed painted SAKs where pretty recent, but seems I was wrong for it to be pre-1986!
-
Scales are new, SAK is pre 1971. DLT scales are great because they have a clear coat that resists scratches, etc... Highly recommend.
-
Day 4:
1947 Huntsman once again and a 60’s Movado dress watch.
Completely forgot I was going to have a vintage watch pairing with the Swiss Army KnivesSent from my iPhone using Tapatalk
-
@pa_strunk said:
Scales are new, SAK is pre 1971. DLT scales are great because they have a clear coat that resists scratches, etc... Highly recommend.oh ! that makes more sense !
Very cool to see an old man getting so beautiful modern scales, that's quite unusual
-
Extra pic:
I used the saw on the OC Farmer to enlarge a hole so that I could install a flexible conduit:

-
Vintage SAK 30 Day Challenge
Day 4 of 30
1970-ish PioneerSome basic package work today
.jpg)
-
Day 4
Another from my family of Executives. It has nickel silver tipped tweezers, which I think makes it circa 1957. Correct me if I'm wrong on that. Still feels like a brand new SAK.

-
Day 4
Replacing some cabinet handle screws with the ILP.

-
@Farmer X said:
Once again, it's hard keeping up with y'awl, but there's a ton of great stuff!Day 3
This economy model is my oldest Bantam. It sports the earliest iteration of the combo tool: more pointed hook, more blunted piercing point, flat top, and no half-stop. I'm thinking it's from the same time period as my Tinker Small. No use for it today.
[attach id=0 msg=2414440]
I've never tested it but wonder which of the combo to designs works better on Philips

Model No 54 H. Used the cutter blade to cut a cord.
Compared to a modern SAK I see neither advantages nor disadvantages. The knife blade has hardly changed. It's a pity that these models are no longer made in 75 mm. A 74 mm model is not an alternative for me because the blades are too narrow. 1 point each for old and new. Result: 3:2
Another beauty from the looks of it elsinox, would love to see more of those scales

@Rizio Il Ghiro said:
Nice work and nicer knives!Day 4
Time to trim the damaged leaves off my tomato seedlings which unfortunately got left out one night when the temperature dipped unexpectedly - my solo OC branded for Brown Boveri & Cie did the job nicely with no need to get Victorinox pruning knife out of the garage! Got to love that red alox!
particularly with a red OC 

The awl appears to be quite capable of creating a hole in this plywood

apart feom a couple of dings, looks like it could pass for new Adam

-
@Fireman said:
DAY 4 Time to break out my old Huntsman.
:ahhh Lovely

@peddy v said:
Day 4:Getting the blade of the Bijou a bit sticky from the tape on all this little packages. Very nice toys arrived for me, Knipex Cobra xs (its tiny but feels solid), Kaweco Sport AL rollerball pen (light, compact, elegant but rustic), a Clipper metal (love the refillable idea, quite heavy, its the better bic imho) and a single butane torch insert for my good old leaky zippo (with a brewery on it that doesnt exist since the late 90s, local german)
The Cobra XS is a great little tool, took one overseas when I didn't want to carry a full MT, pairs great with a SAK

Really like that Clipper I had one years ago when I was on 20 a day!

@knifecoop said:
Day 4 - Using the late 60's Victorinox Salesman to cut up a snack.Vintage SAK and cheese

Cutting bread for sandwich with OC Solo (early 70s)

-
@knifecoop said:
Just a quick suggestion to my fellow participants in this 30 day challenge. If you can, each participant could make a small donation to help fund the forum and the SAKWiki. I know that I've used the SAKWiki a lot recently to date the knives I am carrying for this 30 day challenge. This would help to promote the hobby that we all enjoy.The 47-52 Spartan/Standard picture below will be my next edc in rotation for the 30 day challenge.
totally knifecoop, great point, become a charter member too guys 
Lovely SAK too mate
@pa_strunk said:
Day 4, cut open my Chicken Salad SandwichYum that looks tasty

@m47mu74nt said:
<u>DAY4</u>Used the early 70's windsor to cut ripped off flesh hanging of my finger

:ahhh nasty...glad the Windsor could help, very apt with the coronation this weekend

@tjfarrington2000 said:
Day 4:
1947 Huntsman once again and a 60’s Movado dress watch.
Completely forgot I was going to have a vintage watch pairing with the Swiss Army KnivesGreat combo
that really is a lovely vintage SAK 
@GA1dad said:
Vintage SAK 30 Day Challenge
Day 4 of 30
1970-ish PioneerSome basic package work today
Well worn alox always looks fantastic

@BPRoberts said:
Day 4Replacing some cabinet handle screws with the ILP.
Good job BPR

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


