The Hacked Leatherman Owners Club.
-
Added a glass breaker bit to my Charge Knife Ti





Main thread on it is Here and it will take you to my newest posts about my Charge Knives in the Mod Squad


-
Great job on the addition Poncho.. Well do

-
Thanks Jones

-
i dilute Poncho's post, one more rebuild core, added awl, and locking spring for hex driver (2 lock position 90 deg and 180deg )
awl to lead up after extract saw and file


-
Great modding, p1

-
Not sure if this is the right thread to ask a question in, but it does pertain to a mod. I want to replace the micro driver on my charge with and awl. Does anyone know if the Rebar awl, or any other awl is the same thickness as the Charge's micro driver?
-
Rebar Awl is about 3mm thick and Charge eyeglass driver is 2mm.
Sent fra min M2002J9G via Tapatalk
-
Hey guys, new here and first post. I started out on the Facebook group but yikes...lots of wise guys on there who prefer to be smartasses vs give advice so hopefully the forum is less hassle...
Anyway, I wanted to thank many of you for sharing your mods, they've helped me out with this project a lot and I may have some questions still but thought I'd share where I'm at so far. I've carried a Vic Spirit for a long time but recently changed jobs and so my needs changed a bit with it, specifically I tend to use a Philips driver a lot more and wire cutters enough that I really wanted to be able to service them so it got me looking at Leatherman tools.
I have never liked the bit driver idea. I'm sure most of you already know so probably no need to go in depth about it, but the lack of reach and lack of grip in the screw leave me wanting more. That narrowed my choices down to the tools with full size dedicated Philips drivers and I initially got a Rebar but the plans I had pushed me to the ST300 and on down the rabbit hole I've now combined tools from the 300M and 300EOD.
Anyway, besides mixing and matching tools to what I'd use the most I wanted to see about making driver bits that have more reach and better bite into screws so I ground down a Milwaukee bit to fit the bit holder.

It lacks just a wee bit of reach vs the 3D driver, but I'm still on the hunt for different types of bits I can modify. I have a couple in mind that I know I can make work and make them basically as long as will fit inside the tool and still allow it to close all the way.
I also would like to swap in another T-Shank tool but I'm not sure where I can fit it, it could go where the wood saw and flat driver are, but then I'd have to carry a flat bit and I'm trying to not need any additional tools on me or my belt (though I do plan on making an additional bit kit for my bag). I don't want or need two saws but having both wood and metal would be cool, but I definitely do want a file so if I can't work another T-Shank in somewhere I may put a factory file in place of the knife since I always carry a knife anyway. I would also need another T-Shank tool and I'm not buying another 300EOD for it so if anyone is selling one let me know.
-
Looks great, Evil

You have gone down the rabbit hole that I have been contemplating. The M and the EOD have tools I could use, and so I have also thought about acquiring and combining the 2 MTs.
-
Welcome to
and I can assure you that our forum is much better than the FB 
That is a pretty awesome mod and I do like the idea of grinding down better bits to fit into the bit driver

Very nice toolset for sure and it seems very versatile

Love a nice mod and that sure is a nice one
8) -

Welcome to
Evil D.
It is very satisfying modding your MT to your needs, isn't it? :D -
Welcome aboard Evil D! We know each other from Spyderco
You're going to love it here!@Evil D said:
Hey guys, new here and first post. I started out on the Facebook group but yikes...lots of wise guys on there who prefer to be smartasses vs give advice so hopefully the forum is less hassle...Anyway, I wanted to thank many of you for sharing your mods, they've helped me out with this project a lot and I may have some questions still but thought I'd share where I'm at so far. I've carried a Vic Spirit for a long time but recently changed jobs and so my needs changed a bit with it, specifically I tend to use a Philips driver a lot more and wire cutters enough that I really wanted to be able to service them so it got me looking at Leatherman tools.
I have never liked the bit driver idea. I'm sure most of you already know so probably no need to go in depth about it, but the lack of reach and lack of grip in the screw leave me wanting more. That narrowed my choices down to the tools with full size dedicated Philips drivers and I initially got a Rebar but the plans I had pushed me to the ST300 and on down the rabbit hole I've now combined tools from the 300M and 300EOD.
Anyway, besides mixing and matching tools to what I'd use the most I wanted to see about making driver bits that have more reach and better bite into screws so I ground down a Milwaukee bit to fit the bit holder.

It lacks just a wee bit of reach vs the 3D driver, but I'm still on the hunt for different types of bits I can modify. I have a couple in mind that I know I can make work and make them basically as long as will fit inside the tool and still allow it to close all the way.
I also would like to swap in another T-Shank tool but I'm not sure where I can fit it, it could go where the wood saw and flat driver are, but then I'd have to carry a flat bit and I'm trying to not need any additional tools on me or my belt (though I do plan on making an additional bit kit for my bag). I don't want or need two saws but having both wood and metal would be cool, but I definitely do want a file so if I can't work another T-Shank in somewhere I may put a factory file in place of the knife since I always carry a knife anyway. I would also need another T-Shank tool and I'm not buying another 300EOD for it so if anyone is selling one let me know.
-
Nice job by the way!
-
Great to see you! -
Welcome to the forum, Evil D! That looks like a brilliant toolset, nicely done

-
Welcome and terrific mod.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

