Vintage SAK 30 day challenge May 2023 (SAK’s from 1986 and earlier)
-
Day 22 - Trimming a little plastic

-
DAY 22 Tank inspecting today's carry SAK.


-
Day 22
Bike ride to the office today with the Solo.

-
DAY22
Today I used my Elinox stamped BAKER'S knife to cut... Bread. (even if it's intended to cut dough and not baked bread, it works pretty well!)
Wasn't pleasant to use it to cut open packages though, but it finally did it.
-
Day 22

-
Day 22
One of the true gems in my collection, my 1965 Alox Woodsman. This one has a bit of a story behind it. When I first got into collecting Swiss Army Knives, and before I knew much about different models, I decided I really wanted a red, old cross Alox. Not long after that I found a beautiful Farmer at a reasonable price and I bought it.When it arrived I was confused; there was no opening layer. I started researching online to figure out what the model was, which led me to visit Sakwiki and the Swiss Army Knights forum. Eventually, I found the Sakwiki page for the 93mm Woodsman, and was thrilled to find I had a fantastic example of a pretty rare knife.
The best part is discovering this forum and Sakwiki. I can't tell you how much I've learned from those two sources. I'm also glad I finally joined after being a lurker for so long. LOL
I haven't used it for anything today, but I have enjoyed talking it out of my pocket and admiring it. The snap on the tools is ridiculous; it's hard to believe it's almost 60 years old. Victorinox quality!
Also, I can't seem to capture the true color in a picture. It has a very slight orange-ish hue that is really very beautiful.

-
Day 22:
Cut some tape and cleaned my fingernails.

-
Day 22:
60’s executive for today. No pics as I’m swamped at the momentSent from my iPhone using Tapatalk
-
Day 22
<u>DEATHCLAW</u> test number 1. First day for the '43. I bought several cans of fruit at the store for
sciencedessert.The can opener is definitely the worst nail breaker on a tool full of them. Not only is it hard to get the leverage to open the tool, but that little nub is great at slipping under/wedging in a nail.
[attach id=0 msg=2418027]
Today, I tried using the can opener as close to the modern method as possible. If you put the pointy side on the top and the other side down/outside there's no good way to hook it on the rim of the can, and you're actually working "upside down" relative the the mechanism, so it tends to close up. Flip it over, and it is possible to start the cut with the tip, but the awl works better.
[attach id=1 msg=2418027]
[attach id=3 msg=2418027]
Once started, the opener itself is very easy to use. It's a very generous sharp edge compared to most modern designs. You use the "bottom" half (with the thumb tab) as a lever and slice on through. As you can see, it's a great way to make a knife using your Swiss Army Knife.
[attach id=2 msg=2418027]
I'll try the other cans with some different techniques later this week and report back.




-
Vintage SAK 30 Day Challenge
Day 22 of 30
1970-ish PioneerI found this $2.99 antenna at a thrift store this afternoon,,,, and it works!! The significance is that I needed something to troubleshoot my current setup that has not been working properly. I was not sure if it was my tv connection, the antenna or the coax cable in between. Since I plugged it into the tv and my reception was instantly clear, I've now ruled out the tv,,, for only $2.99,,,,, and I have a backup antenna to get me by for a bit,,, and to use in our camper possibly.
.jpg)
-
Day 22
No uses today but I thought I would post a picture of my early 80s Standard with this neat book I got recently.
[attach id=0 msg=2418035]
I, uh, haven’t read it yet… :D

-
@psyjohn said:
Day 22
One of the true gems in my collection, my 1965 Alox Woodsman. This one has a bit of a story behind it. When I first got into collecting Swiss Army Knives, and before I knew much about different models, I decided I really wanted a red, old cross Alox. Not long after that I found a beautiful Farmer at a reasonable price and I bought it.When it arrived I was confused; there was no opening layer. I started researching online to figure out what the model was, which led me to visit Sakwiki and the Swiss Army Knights forum. Eventually, I found the Sakwiki page for the 93mm Woodsman, and was thrilled to find I had a fantastic example of a pretty rare knife.
The best part is discovering this forum and Sakwiki. I can't tell you how much I've learned from those two sources. I'm also glad I finally joined after being a lurker for so long. LOL
I haven't used it for anything today, but I have enjoyed talking it out of my pocket and admiring it. The snap on the tools is ridiculous; it's hard to believe it's almost 60 years old. Victorinox quality!
Also, I can't seem to capture the true color in a picture. It has a very slight orange-ish hue that is really very beautiful.
an absolute beauty psyjohn 
-
@MichaelGT83 said:
Day 22

-
@BPRoberts said:
Day 22<u>DEATHCLAW</u> test number 1. First day for the '43. I bought several cans of fruit at the store for
sciencedessert.The can opener is definitely the worst nail breaker on a tool full of them. Not only is it hard to get the leverage to open the tool, but that little nub is great at slipping under/wedging in a nail.
[attach id=0 msg=2418027]
Today, I tried using the can opener as close to the modern method as possible. If you put the pointy side on the top and the other side down/outside there's no good way to hook it on the rim of the can, and you're actually working "upside down" relative the the mechanism, so it tends to close up. Flip it over, and it is possible to start the cut with the tip, but the awl works better.
[attach id=1 msg=2418027]
[attach id=3 msg=2418027]
Once started, the opener itself is very easy to use. It's a very generous sharp edge compared to most modern designs. You use the "bottom" half (with the thumb tab) as a lever and slice on through. As you can see, it's a great way to make a knife using your Swiss Army Knife.
[attach id=2 msg=2418027]
I'll try the other cans with some different techniques later this week and report back.
:ahhh :ahhh
Great test but crikey

-
@marlowe221 said:
Day 22No uses today but I thought I would post a picture of my early 80s Standard with this neat book I got recently.
[attach id=0 msg=2418035]
I, uh, haven’t read it yet… :D

I love SAK books, that ones pretty good, some interesting tips

-
Day 23
As I’m still recovering from surgery I’m not really supposed to do anything, had to sneak this little job in when Janet went out

Wenger Tahara mod08 “P” (private) with WK stamp
The awl is lovely and pointy on these old soldiers and the driver good and solid, probably shouldn’t have cut my finger nails this morning though





-
@marlowe221 said:
Good to know! Any other books you would recommend?The other three I have are these
Dave Arnold’s Wenger book is a work of art full of beautiful pictures and a real slice of history
The survival book has plenty of projects and tips and gets you thinking of the possibilities a SAK can be used for. It’s not that long but quite enjoyable
The Vic book examines some history and takes a close up look at some models as well as having some nice pics of old ads which are cool but it could be more comprehensive



-
It's been an...interesting past 36 hours. I'm a little late with some posts, so let's get on it.
Day 21
A no-use day...
[attach id=0 msg=2418071]
Day 22
A new outlet was wired up. I used the Tinker Small's Phillips to screw the outlet to the junction box, but quickly gave up and grabbed a dedicated tool. The Camillus 27 was used to cut the insulation from the Romex.
[attach id=1 msg=2418071]
I awlso tried out the wire stripper notch. In my opinion, it's the most pointless feature on an SAK. A dedicated tool does the job much faster and easier. The notch doesn't hold 12 AWG very well. This one was even worse; without a half-stop, the cap lifter fully opened during the process...more than once. Though it got the job done, it's the first and last time I'll try stripping wire with an older SAK.
[attach id=2 msg=2418071]

.jpg)
.jpg)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login