Vintage SAK 30 day challenge May 2023 (SAK’s from 1986 and earlier)
-
day 30
Model Elsener No. 236
Used the screwdriver again to fix a broken light.
For me, the screwdriver is the most important tool next to the knife blade. This old screwdriver works perfectly for this type of screw, so point for vintage.
Intermediate score: 18:12 for vintage

-
I'd be tired, too. How many mouths were you feeding?
@Adam5 said:
Hamburgers (and a chicken breast) for the family and a future meal...Great idea...hamburgers later in the week!

@Echotech said:
I’m going to finish up the way I started with Coco ignoring a BYSAK, this time a mod 51 Wenger Grillon from 1962
@z1913 said:
It was great to use them and as well to see all your SAK vintage gems!
and good write-up!I got a little behind again, but will be caught up quickly...
Day 29
Gave the Tinker Small some fresh oil in preparation for it going back into semi-retirement.
[attach id=0 msg=2419421]
Day 30
A group shot of the SAKs I used in the challenge...
[attach id=1 msg=2419421]
I enjoyed Elsinox's comparisons between vintage and modern SAK tools. Though I had few such comparisons to make, my results were vastly different. The blades work equally well regardless of age. I had no older types of can openers to try out. The Tinker Small's back layer awl does just as well as a modern equivalent. Ditto the back layer Phillips...which is to say I'm more inclined to grab a dedicated tool. Where we really see a difference is with the cap lifters and combo tools. It is little wonder that Victorinox added a half-stop to them! And the modern combo tool, though it doesn't look as good, does a much better job with opening cans.
Well, that's it. This may be the last challenge I participate in for a while, as I had several no-use days and a mind that was elsewhere. Probably it's best for me to participate in a challenge if I know I can do "30 in 30."
Time to request the badge...


-
Thanks FX glad you enjoyed it and got to put them to the test. Agree re opener layer

-
Wow - some marathon cooking going on here!

Day 30
Back to a Wenger M61 BYSAK from ‘65 for yet more awlsome duty opening up fat blocks (the birds are really getting through these this Spring!) - they never seem to rip open well without a tool, so good job I’ve got a ready supply of SAKs to hand! I have relatively few older SAKs, so none of the tools are that different from their current counterparts with the exception of the awl on the 234k which is more fun to use than the modern backside awl on 91/84mm knives and gives the 93mm awl a good run for its money,though the latter still comes out top imo. It’s been great to see so many vintage knives being put to good use! Thanks for hosting, Echotech (though Coco seems to have lost interest on this one - can’t blame them as SAKs aren’t really for dogs!
)!
And thanks to you and Comis for the new badge! 

-
Thanks Rizio

Interesting your thoughts on the awl
think I now prefer the 08 old style awl over all newer ones. It was the tool I used the most in the end and made some good screw pilot holes in some shelves and untangled a knot very effectively….mod 61/modern 93mm a close second for me
-
Blimey, I've come on for a quick gander this morning and now I'm absolutely starving!
-
DAY 30!

This is my most vintage SAK. If it has a weakness, it's that I don't carry or use it much. This challenge forced me to do both, and I'm glad I did.
Thanks to all fellow challengers for the great pics!

-
Day 30

This is my only vintage SAK, and man it is great :D
The only thing I missed was scissors. Everything else about it is top notch
Thanks for hosting the challenge, Echo, and congratulations to everyone who has earnes the badge

-
DAY 29
it was a beautiful day and the 70s Director accompanied me on some adventures. Here it is pictured with a banana plant. No uses but some great memories.
Passed out early last night, so this one is a bit late my bad.
-
Day 29 - No major work for the Salesman other than opening a couple of boxes.
Day 30 - back to work in the office, the Salesman will be used to open today's mail.

-
Day 30:
Finishing strong with a NOS Victoria Ambassador!



This knife has literally never been used, so I figured I’d finish off the challenge with something special! I’d also like to note as one of the reasons this challenge was started I don’t plan on frequently using anything OTHER than a vintage SAK. The build quality of these vintage models is light years ahead of what you can get today, and I see the knife I carry as a personal statement, the same as a vintage watch, and these knives, especially the 30s and 40s models do make quite a statement.
Sent from my iPhone using Tapatalk
-
Also, how do we request the badge?
-
Day 30 bonus
Just off the train back from a day in the office in London, so time to exercise the M61 BYSAK ‘65’s bottle opener (my favourite bottle opener - the modern ones work well, but lack the chunkyness of the M61 and its wire stripper blade!


-
DAY30
Carried and used my 1966 mod61 for some electrical work, the wire stripping portion of the cap lifter is really cool on these

-
Day 30
Just a simple shot to finish. It's been a good challenge, I'd like to try a mod 61 from the same era that is in slightly better nick to see how it compares. But I think I'll be reaching for a Pioneer for a bit when the need arises!

-
Hi everyone, I'm sorry but I'm not able to complete the challenge. Between wrapping up the school year, taking a weekend getaway with my wife, and getting ready to leave for a beach vacation, I haven't had time to photograph and post. I had a lot of fun and loved seeing all the beautiful vintage SAKs. I'm also a lot more comfortable carrying some of my shelf queens.
Here's a couple pics I did snap this week of my 60s blue Prince with the detailed metal inlay, and my 60s President (Climber) helping make dinner..


-
Day 30
Back to the Huntsman today. I forgot to take a picture of slicing a banana for my students to share, so have a dramatic reenactment. They graduate next week, and none of them went, "IS THAT A KNIFE!?" They've come so far. I'm proud.
Overall Impressions
Huntsman and Explorer: Aside from missing the hook a couple times, no big revelations here. Any four layer SAK is still going to be a great companion for whatever you need, regardless of model, year, etc.
Electrician: Meh. 2 layer Alox is a pretty limited toolset, and I'd rather have the can opener than the electrician's blade. This one will probably come out again someday for an old cross challenge, maybe I'll click with it then.
'43: I always love pulling out an old tool to see how they've changed. I babied this one a little (and it broke a bunch of my nails in return) but it was cool to see what we'd have "back in the day."
I love the giant round awl. It just feels good to use. The can opener was fun, although the modern one is more functional. I didn't get a ton of milage out of the BEEFY flat head, but it sure felt nice and sturdy.
A pleasure to go on this journey with you, gentlefolk.
I'll see a lot of you next month for the Tweeners!
-
Vintage SAK 30 Day Challenge
Day 30 of 30
1970-ish PioneerAnother great challenge is in the history books!! Thanks to everyone who participated and kept it interesting. Congrats to everyone who earned the new badge!!
%20(650%20x%20488).jpg)
-
@tjfarrington2000 said:
Also, how do we request the badge?I know there's a thread explaining the process but can't find it, so will have a go myself
On the website, (not Tapatalk if you're using that), go to your Profile (click your user name top left), a little way down the page there's a bar with "Profile info" "Awards" "Modify profile", click on "Awards", then click on "Show available awards".
Find the Vintage SAK award (it's the very last one listed on page 8), on the right hand side there's some small icons, one says request award when you hover over it, click it.
A box will open up asking why you should get the reward, you will need to copy a link to your Day 30 posting and a quick explanation, submit.That's it, a Mod will do it usually in next 24 hours

-
Excellent Day 30 guys, great to read your round ups and glad you all enjoyed it, congratulations on your badge

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login