Tween Challenge - 84 and 85mm SAKs
-
DAY 04
Spent most of the night driving home. So I’m just now submitting day four. Opened the mail. Hopefully day five will be mor interesting.

-
Day 5: Vanity pic

-
Day 5
After three weeks of holidays it´s back to work for me. Starting the day with a cup of coffee, and then weed trimming all day long. I used the Forester´s blade several times to cut a length of trimmer wire.


-
DAY 5 It slices, it dices...the Handyman cuts open mulch bags as well as its larger brethren.


-
@nate j said:
Day 4Finally had the chance to try out the cap lifter. I tried it several times, just to be sure I was giving it a fair evaluation. It checked out just fine. I do find that this style of cap lifter seems to work best if one bends the cap at one location first, then rotates the bottle about 90 degrees and goes at it a second time.
Heineken

-
Day 5 of 30
After observing the goodness shared of Alox and Cadets, I finally decided to free my Silver one.
I employed the sharp edge of the can opener of the small Tinker. Pushed around the edges.
[attach id=0 msg=2420556]And success, with no slips too!
[attach id=1 msg=2420556]

-
@BPRoberts said:
So the the Micro Farmer is l. blade, s. blade, opener layer, saw?Indeed, it's just a scaled down Alox Farmer.
-
I couldn't help myself after seeing Buzzbait's Walker with Micarta scales and bought one off of Amazon. That was the only place I could find them in stock and there were only 4. Kind of disappointing to pay double the price they were probably 6 months ago but it should be here later this week I believe. My Alox Walker just does not seem like it would be comfortable at all to hold if the saw was needed for anything other than a small twig. It's just too thin in my hand. I'll pick up some Taschenmesser micarta in the near future.
-
@Bunk Tuppins said:
I'm closing the S101 two handed: I hold the knife with right hand and use left palm to close the blade.With non-locking blades my right hand grasps the scales with fingers and thumb such that the fingers are not in the path of the blade. Fold it closed with the left palm and everything is fine.
With the 85mm locking blade the fingers of my right hand are in the path of the blade as I squeeze the release lever with my right index finger. The moment I feel the blade escape the lock (which is actually a little before the blade hits the half lock position) I change my right hand fingers back to their usual position: not in the path of the blade. My initial difficulty with the unlock was that it requires the right hand fingers to sit in the path of the blade briefly as you squeeze the lever. As I got used to the mechanism I realized I could control the progress of the blade from locked to unlocked very well and there was no danger of the blade continuing around before I had a chance to get my fingers out of the way.
The pics (S18) show the point where the blade has escaped the lock and the half-lock point.
Thanks for the detailed write up!
Being a knife enthusiast, what worries me most are those nail breaking traditionals with really strong back spring--
What those blades have taught me is to pinch tight on the blade flat(with the left thumb and index) when I start closing, easing the blade into the chassis while having a good grip on the handle with the right hand(well clear from the knife path, from beginning till the end). That has became a habit for handling any slip joint I own, and I even practice that whenever handling a new knife or a borrowed knife(just out of respect).
-
@HarleyXJGuy said:
Day 4Continuing the food theme.

Wow, some serious eating theme on-going here!
@Farmer X said:

I think sugar is probably better for you than that artificial stuff. But take that with a grain of salt; I nearly awlways take my coffee black.
Hope she's better by now!

It got postponed. The other model that MadPlumbarian gifted me will be much easier to put together.
Those MiniGyvers can be clever. I know I was!

Yet another fantastic day, y'awl!

Day 4
A little late, but for once it was due to the phone charging rather than me nearly forgetting to post. I tried to use the Bantam's combo tool to remove the screws holding a new wall clock to its packaging. It was less than ideal for that purpose, so I grabbed Tatty Rally.

[attach id=0 msg=2420500]
[attach id=1 msg=2420500]
I am not quite there yet, being an avid coke-zero drinker, I still have my coffee with sugar and milk.
-
Day 5

Micro Farmer opened a new box of lego for the little guy.
-
Good Monday afternoon.
Today I'm outside enjoying a smoke.
I tell my doctor that I only smoke half a cigar a day. I'm good for today and tomorrow now. 😎
-
DAY 5!!
A snack and a SAK with my Cadet

-
After enlisting in the August Alox Challenge I (jokingly) suggested a thirty beers in thirty days challenge (see /post/2418180). You may have noticed that I have started already, together with this Tween Challenge. I´m trying to have a different one each day so that it won´t be too easy. Here´s day 5. The Forester´s cap lifter performs outstandingly!

-
DAY 05
Well it is back to the grind after having about 11 days off. Sure needed it and visited the pines and red rocks and just relaxed.
Back to the Alox Bantam today and made quick work of my pepper jack.
I am pretty sure I have a pencil box full of my tweeners and will look for it after work so I have more options moving forward.

Launched from the Southwest
-
Very hot today in southern Oregon. May need refreshment later.

-
@MTSAK said:
Wow! Is it always that dry? Right now everything is lush and green in Western Montana but won't be in another month or so.We had a weird heat wave in the middle of spring that sort of changed the usual pattern and made a lot of grasses mature earlier. The green pasture you can see is a result of irrigation. Both the yellow and green areas were lush and green recently and then mowed, raked, baled. Last year was scary. This year may be worse. It's dry and hot already. I'm a bit worried about fires this year.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
