Tween Challenge - 84 and 85mm SAKs
-
@CM Yo said:
Used the corkscrew to grab cotton wadding on a new aspirin bottle.Wow, they actually still sell pills bottled, and with the cotton?
So that means the original use for the 'Cut-and-picker' blade on the MiniChamp is still valid... Cool!Day 7:
I've been helping people with their PCs a lot lately. A friend keeps playing about with his watercooling setup, but he's not got a head for cable routing and his case is a pain in the bum to do that with... so it falls to me.
Seems he'd swapped some of his 15 fans around and not put them all back in the right connectors, so his carefully crafted and complicated profile curve software was badly messed up. I had to work out what he'd done and then work out how to fix it.I usually use the Cybertool Lite for this job, but I'm on Challenge so here's me and the Sportsman live-testing the four fan channels and tracing cables:
[attach id=0 msg=2420929]

-
@Tasky said:
Wow, they actually still sell pills bottled, and with the cotton?
So that means the original use for the 'Cut-and-picker' blade on the MiniChamp is still valid... Cool!Day 7:
I've been helping people with their PCs a lot lately. A friend keeps playing about with his watercooling setup, but he's not got a head for cable routing and his case is a pain in the bum to do that with... so it falls to me.
Seems he'd swapped some of his 15 fans around and not put them all back in the right connectors, so his carefully crafted and complicated profile curve software was badly messed up. I had to work out what he'd done and then work out how to fix it.I usually use the Cybertool Lite for this job, but I'm on Challenge so here's me and the Sportsman live-testing the four fan channels and tracing cables:
[attach id=0 msg=2420929]
I do not understand the words coming out of your mouth.
-
Day 7
Rough day for the Small Tinker today.
On the plus side I’m pretty sure the mystery of the SAK blade steel was solved. It is definitely not S90V or Cruwear.
Got some new trailers today and at some point the connection on a hydraulic line was wrapped in a rag and zip ties. Who knows why.


Anyhow it fell to the Tinker to cut the thickest zip ties in the history of ever.
Of course one of these gargantuan zip ties was buried in a notch of the fitting.
Didn’t end well for the main blade. Badly rolled along a good portion of it and one section in particular didn’t fare well.

At least there is a built in back up blade and on opportunity to give it a good sharpening this weekend is in the offering.
-
Day 7 Part 2
You can’t keep a good Tween down.
Even with a broke wing it can fly!
We’ll open dog food bags.

-
That is a bummer Harley!
The SAK steel is a stainless quality, soft by blade standards but great for food items.The can opener front edge is a good option for that purpose I learned when carrying a Farmer model in pocket several years ago.
It is possible the ragged wrapped was only to eliminated overspray of fluids. Not to bstop the leak.
-
**Day 7:
**
I got in a new hammock tarp from Warbonnet Outdoors, so I spent my day cutting cord for new guylines, prusiks, and a new ridgeline.
-
I ordered another Delemont from Japan which was supposed to arrive today but something screwed up and the carrier claims they tried the door but no answer. Sigh. I was here the whole time. I wonder where they tried to deliver it? Oh well
I have to content myself with playing around with this Recruit today.
-
@LoopCutter said:
It is possible the ragged wrapped was only to eliminated overspray of fluids. Not to bstop the leak.I would think the same thing as you but it’s not for overspray because when we unhook it there is a diverter valve we activate beforehand. No pressure in the hose when it is unhooked.
Only thing I can imagine is to keep the connection clean when we dump out the gravel or dirt. Didn’t work at all though, if anything it trapped the dirt inside of the rag.
-
Day 8
Took the cadet on my walk

-
@HarleyXJGuy said:
I do not understand the words coming out of your mouth.Mess of electronic wires, pretty pic of SAK helping me out.
-
Day 8: Going to be on the road all day tomorrow so I'm going to post a little early. I used the scissors to cut up a plastic bottle holder.

-
<u>DAY 07</u>
Used the red cadets nail file after cutting my fingernails. Even though it was a bit smoky, Bella and I still went out for some exploring. Hope yawl are staying safe up in Canada.


-
[emoji240] -
Day 7
The Cadet trimmed a cigar and opened a beer today.
Here it is relaxing by the creek.

-
Day 7
I used the can opener as a hook to pull some tent staked out of the ground for some portable soccer goals at my daughter’s soccer practice.
[attach id=0 msg=2420975]
No action shot, unfortunately.

-
@Enginears said:
I was able to take some brass pin from a 58mm and peen the scissors back, worked quite well.Good thing you got it fixed!

@CM Yo said:
Sure like that wood feel.You and me both!

@Barry Rowland said:
I used the scissors to cut up a plastic bottle holder.That's something I haven't done for a while. We have a giant Brita filter now, and I haven't had soda in a while. Don't miss it, either.
@Explorer said:
Bella and I still went out for some exploring.
Another great day, y'awl!

Day 7
Some VIPs (Very Important Provisions) were freed from their shipping envelope today.
[attach id=0 msg=2420976]

-
Recruit cut up some sausage

-
Day 8 - Walker
The Forester stays at home today and I´m taking the Walker to work with me. The scaffolding is for the landlord; he´s painting the woodwork on the house.

-
@SurgeUk said:
Interesting...do other states only have a front or rear plate then
In the UK only motorbikes have a single plate (rear) otherwise it's front and rear for cars, trucks etc (except the King he doesn't have plates on his official runabout)
It does depend on state. Most states require a front and back license plate, but a few states only require a rear one.
@MTSAK said:
Day 7 of 30:
Last day of school before summer break. This year had been a tough one. We, as a society, really need some parents to start parenting their kids and stop being best friends or absent altogether. I've heard of so many amazing teachers walking away from their profession to find something new because kids are so horrible to deal with these days. Anyways, 3 months of freedom with my wife and kids! I can't wait!I'm carrying my Cadet today. Getting on some Bible study and coffee. Have a great day, everyone!

Love the mug and the Cadet
@Ron Who said:
Day 7 - S17 (Forester) and Evo17They have the exact same set of tools but (unlike many so I noticed) I prefer the flat scales.
I too prefer flat scales. The Evo just don’t feel right to me and add bulk.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login