What Did You Use Your Multitool For Today?
-
CRKT Guppie helped to change the battery of my trusty GMT400:

Sent from my iPhone using Tapatalk
-
A gargantuan can of nacho cheese presented an excellent opportunity for testing some can openers.
[attach id=0 msg=2410696]

-
I’ll post it here as well if you gents don’t mind [emoji2]
Busy day for my Spirit X Plus
First I used it to unpack a box of herbal tea (no photo taken), then I cut some dill with the main blade

After that I discovered that a bathroom ceiling light that I only replaced a few months ago went almost completely dead [emoji20]
Used a ratchet to unscrew the chassis of the light from the ceiling and Spirit’s small flathead to disconnect the wiring


Will hopefully have that light replaced under warranty tomorrow [emoji1316]
-
Great uses and pictures

-
@in_sympathy said:
I’ll post it here as well if you gents don’t mind [emoji2]Busy day for my Spirit X Plus
First I used it to unpack a box of herbal tea (no photo taken), then I cut some dill with the main blade

After that I discovered that a bathroom ceiling light that I only replaced a few months ago went almost completely dead [emoji20]
Used a ratchet to unscrew the chassis of the light from the ceiling and Spirit’s small flathead to disconnect the wiring


Will hopefully have that light replaced under warranty tomorrow [emoji1316]
One thing that crossed my mind recently is that most of the things we buy these days are disposable. Either due to an attempt to cheapen the production or for any other reason almost nothing is built to last nowadays. Unlike SAKs and Swiss Tools. That’s what I think of every time I use those pieces of engineering awesomeness [emoji1316]
-
@in_sympathy said:
I’ll post it here as well if you gents don’t mind [emoji2]Busy day for my Spirit X Plus
First I used it to unpack a box of herbal tea (no photo taken), then I cut some dill with the main blade

After that I discovered that a bathroom ceiling light that I only replaced a few months ago went almost completely dead [emoji20]
Used a ratchet to unscrew the chassis of the light from the ceiling and Spirit’s small flathead to disconnect the wiring


Will hopefully have that light replaced under warranty tomorrow [emoji1316]
Warranty replacement and a new light installation complete [emoji736]

-
@in_sympathy said:
One thing that crossed my mind recently is that most of the things we buy these days are disposable. Either due to an attempt to cheapen the production or for any other reason almost nothing is built to last nowadays.
That's why I hate electronics and modern small appliances; when they break, it's cheaper to buy a new one than repair what you have. And it boggles my mind how Victorinox can continue to offer a product of such high quality at such a low price, even with inflation being what it is. Better yet, it's been my experience that they stand behind their products. They really are a notable holdout in the trend toward cheap, disposable crap. -
Carrying the Curl today, only thing I've used it for was to get rid of a steel protrusion off a shelf. Was straightening up gallon oil and caught it on a bottle resulting in a mess. File on the Curl handled the offending steel assailant quickly
Sent from my SM-G996U using Tapatalk
-
Changed out wife’s cycling shoe cleats from old shoes to new. Used the awl on the Electrician to clean out caked on dirt and 4mm bit on the Wave.
[attach id=0 msg=2420419]
[attach id=1 msg=2420419]


-
Used spirit quite a few times yesterday.
We have an osmos water filtering system at home, but here we have to go and pay for getting filtered water. It’s rather cheap - less than a dollar for 38 liters (two large 19L canisters)
But carrying them using special handles is way more convenient, so I ordered a coole of those.
Used package opener to unpack them

Turns out despite those were made in Turkey - they are still of not the best quality

so I used file and an awl to trim the excess plastic on the handles that otherwise made carrying literally painful [emoji38]

Considering the fact that we are now in the middle of the largest ecological disaster since Chornobyl because of the mfking russian c0cksuck3rs I strongly believe those may well come in handy - people from all over the country are helping out there in the south right now and there already are cases of cholera sadly
-
*
I drilled holes with an Explorer Plus in a soap container for air circulation. Manly!* -
@powernoodle said:
*
I drilled holes with Explorer Plus in a soap container for air circulation. Manly!*Really nice thing to do [emoji1316] helps quite a lot for the soap to get dry quicker
-
[emoji1317][emoji1317][emoji1317]
-
Baby gate install. This is something I typically use my Wave+ kit to do. I was asked to set it up quickly after coming in from doing some property maintenance and had my Marlboro PST and Outdoorsman on me. Gave that a shot and did OK.
Primarily used the PST awl for pilot holes, Outdoorsman Philips, and the Alox Minichamp helped score some plastic used for hole alignment.
[attach id=0 msg=2429408]
Also got to use the PST ruler (bit it tricky to see the pic).
[attach id=1 msg=2429408]


-
Mom visited us today and her glasses broke. Tried to fix them using a SpiritX, but sadly not everything can be repaired [emoji2371]


-
Used my day old new Curl several times yesterday at the cabin. Cut down three maples with a chainsaw and trimmed the branches with an axe and the Curl's diamond file worked great for touching up the axe edge back to shaving sharp. Used also the pliers to pull a hot grill out of the electric fish smoker. Used the knife to cut some vegetables. Also used the scissors as I sewed the most minimal of the LM bit holder "envelopes" out a old car medikit fabric to carry in the jeans fifth pocket. Had so much to done so I forgot to take any pics but yeah, the Curl was a great companion yesterday!
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
I fully acknowledge that I could have used the little plastic fuse puller that GM provided me,,,, but where's the fun in that?

.jpg)
-
I was just taking a trip to our grocerie shop and our 4 year old godson was suddely there with his new bike and her mom. So they walked with me to our house and the boy was driving with the new bike all exited. I noticed that the front brake lever was pointing straight down and the bell was unusable from the position it was at. Not a single thing on the left side of the handlebar was going to be used by those short fingers. So I pulled out the Curl and bit set from my shorts and adjusted the lever and the bell so that he could use them. Made sure that the bolts were tight. Happy I had the Curl and bits with me so I could improve the safety of his riding
Lähetetty minun SM-A426B laitteesta Tapatalkilla
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
