What's on your keychain?
-
No pipe on the clone. ¯\_(ツ)_/¯
I'm a cigar guy these days anyway.
The other functions seem to be fairly good compared to similar tools.
I'm pleased. -
I so thought about getting one of those, I mean heck I got plenty of room on the keychain I just modified, besides the only tool I have on it is a small sak,,

JR -
Clip may come off in the fall when I wear a jacket.

-
Did I say Nitecore, it's the other Nite

-
Got the Tiki today. Clip and split ring not arthritis friendly. Cheap plastic? But it is Bright!
Will have to test, maybe for the nightstand? -
@UscgSal said:
Got the Tiki today. Clip and split ring not arthritis friendly. Cheap plastic? But it is Bright!
Will have to test, maybe for the nightstand?NO, that split ring isn’t friendly, that’s why it’s on one of the G-biners, I didn’t think it was cheap, it seamed pretty good, I must say it’s come in handy!
JR -

...and a Classic goes back on tomorrow, though not a 'key' ! -
@PitCarver said:
No pipe on the clone. ¯\_(ツ)_/¯
I'm a cigar guy these days anyway.
The other functions seem to be fairly good compared to similar tools.
I'm pleased.I actually checked and the original Geekey still has the pipe feature. The clone doesn't but has the opening of the mouthpiece drilled in about 1/4 inch. I guess if you were handy enough you could drill it out, but there's definitely not enough room in the bowl.
Here's the listing of the various functions.
One, that I think is cool is the design of the wrenches. Standard ón one side and metric on the other. Haven't tried them out yet but I have used the Phillips screwdriver on a bench I made years ago. Worked just fine.
-
I’m sure some of you have seen or heard of the inchworm or centipede keychains, well I kinda wanted one but wasn’t paying the price, so I looked around but couldn’t find anything cheaper, so I figured why not try something myself?
I just so wish I had a lathe, anyway, I looked around the house trying to come up with something I could use and well, I found these, simple crochet needles, now, how do I make the marks that don’t wear off? So I marked the inch and half inch marks with a thin marker, went to the workstation and put the needle in the drill, I tried a few things that didn’t really work but found my triangle file and it work perfect, I made the inch a little wider then the half’s, then since it was working, I marked the quarters and then lightly scored lines, it didn’t come out perfect but it kinda worked, I mean hey I used a drill laying on a workbench with the trigger pull with a clamp, I then used a grinder and cut the end off and curved it, and put a hole in the middle so I can put a split ring on it,,
JR
-
A triangle file would also work. Looks like you might like a pocket wrench. They have mm and inch. 2 inch total marked off in 1/16th increments. Pretty handy.
-
@Aloha said:
A triangle file would also work. Looks like you might like a pocket wrench. They have mm and inch. 2 inch total marked off in 1/16th increments. Pretty handy.Well, if our order ever gets here, one thing I did have her sneak this in,, a doohickey, it’s not a pocket wrench as much as I would have liked to find one but you just can’t find them, but on the keychain I have a alox sak, so I have some tools, but not a pry bar, ruler, or wrench, and well, it kinda has most of the tools, plus I liked the carabiner, fig it would make it easy to get on/off the keychain,, so yeah I’ll have a ruler in both metric and standard, but I still made that imitation inchworm, I know I have a 5” flat bar somewhere that doesn’t get used, I know where the one that does but the one that doesn’t get used I could cut in half cutting the 90° off, rounding the end off and drilling a hole for the keychain, but oh well,,
JR
-
Current keychain, regardless of challenges. Signature, Olight, Kershaw thing, pocket hanger...and a car key.

-
Right now Extreme EDC ratchet driver

Sent from my SM-G996U using Tapatalk
-
Just got this new toy,,
JR
-
You know I'm going to the site and check it out!

-
@MadPlumbarian said:
Just got this new toy,,
JRNite-Ize did well on this one. I found one at Home Depot awhile back but they don't stock them any more.
-
They did stock those color twisty things of various lengths....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
