What fixed blade are you carrying today?
-
I finally got a full flap sheath to try with the DPX HEST II! After tearing a shirt and gouging a hole in a couch cushion I had to either find a full flap sheath to cover the ridiculously sharp pry tool at the end of the HEST handle or I would have to make the permanent modification of grinding off the pry tool. So the HEST pretty much sat in storage for the last 2 years. This 9 inch long sheath of unknown origin, with no markings, is about a half inch too long, but otherwise a perfect fit, and it covers the pry tool so it won't inflict any more damage to my shirts or the upholstery. I would suggest an older Buck 105 or 118 sheath would probably do the job but I don't have one to try out. I had been looking for a Buck 103 sheath but now I think they may be too big. Again, I don't have one to try out. If anyone has a HEST or HEST II and the older full flap Buck sheaths I'm sure a lot of folks would like to know if they fit.


-

Good it'll get some carry without worry of damaging anything. I enjoy the knife but that pry thing is odd.
-
I love the HEST and hated that I couldn't carry it. The flap sheath is a little slower than the Loveless style hunter sheath I was using, but it is safer. I can't really imagine a use for the pry tool. It's just a extraneous doodad for marketing I guess. -
I think the pry doodad is exactly as you suggest.
I've beat the tar out of mine. I think Zoid may have also beat the tar out of it and the fella before him did too. Its a helluva knife. I liked it as soon as I saw them and when I got it we bonded right a way.
-
It's a very comfortable knife in my hand.
-
Cool fixie! I assume those handles are G-10? Of course it would be discontinued... :ahhh
-
I have the Micarta one FX. Disco'd huh?
-
I think it is G-10. The DPX Gear H.E.S.T. has been made by 3 or 4 different companies now, both U.S. and abroad. It's all very messy and confusing, but the HEST is still available new and used in one form or another. I only bought the HEST II by Lionsteel in Italy because I found it at a really good price.
-
When I searched Knife Center's site for the HEST, the one page for it said that it is indeed discontinued. I believe that was for the Italian-made one.
-
Carrying the HEST for the last week, since getting the flap sheath. I am very happy with it now. I should have made the effort to find the flap sheath long ago as I feel I've lost time that I could have been carrying the HEST which may be my new favorite knife. I hate the rough coating on the ESEEs and TOPs knives and the HEST doesn't have that. The DPX HEST II by Lionsteel is chemical blued like a gun and the finish is smooth so it doesn't slow your cuts the way the rough coated knives do. The HESTs by other manufacturers may be finished differently, I don't know. The sheath is definitely a half inch or maybe even three quarters of an inch too long but I lack the skill to shorten it myself and not have it look like the crumpled end of a crashed car.

-
Hmm, I don't have the skill to suggest a actual fix but I am happy you are enjoying carrying your HEST. It really is a great knife. Is the steel 1095? I guess I could have looked it up ;).
-
The DPX HEST II by Lionsteel is not 1095 and it is not gun blued, unless the TiCN PVD coating is the same as gun bluing. Not sure the composition of HEST by other manufacturers.
http://knifenewsroom.com/2018/07/dpx-hest-ii-assault/
"This knife is a TiCN PVD coated 3.15” drop point made from Niolox tool steel with a flat grind. It has an astronomical HRC rating of 61 and a blade thickness of 0.19”. On the spine of the blade is bottle opener, and the substantial jimping doubles as wire strippers."
Is Niolox Steel a Good Steel? - KnifeBasics
What is Niolox Steel? Niolox Steel Composition Properties of Niolox stainless steel Niolox Steel Hardness Niolox Steel Wear resistance Niolox Steel Edge retention Niolox Steel Toughness Sharpening Niolox Steel Niolox Steel Corrosion resistance Niolox steel equivalent and Niolox steel comparison Niolox steel vs D2 steel Sleipner vs Niolox steel Niolox steel vs M390 Niolox steel
KnifeBasics - For Those Who Prefer a Cut Above (knifebasics.com)
"Niolox steel is stainless steel with tool properties like D2 steel and Sleipner steel, it is produced by Lohmann. It features a unique composition that contains Niobium which gives it excellent wear-resistant properties."
-
:o Gosh I'm feeling a bit jealous. That sounds amazing.
I knowingly got my HEST wit ha sheath that had been modified and for me was unusable. I bought the De Santis sheath and was confused on how I carry it. I tried but I was not a good sheath for me and I lost a screw trying to configure it. You can see the silver one. hahaha.
I made the leather sheath from an old purse. Its down and dirty but its great. My measurements were off so its wider than I anticipated. I purposely made the belt loop long because of the pry end. I use a dangler with this sheath and drop it just below my belt.
Its been a great knife. I worked on my edge to get it just ridiculously sharp. As you can see it has had a working life. There is no quit in this knife. I have a mini ferro rod in the handle with those cotton things that have accelerant in them.




-
Heres my sheath. The knife is held firmly and deep enough to never worry about it coming out.

-
I think your hand made sheath out of an old purse was a brilliant solution, and it looks pretty good too. 
-
So much HEST goodness!

-
It looks like the DeSantis sheath is meant to attach to MOLLE webbing such as on a load bearing vest or on a pack strap and meant to be hung handle down. I don't know about you but most of my regular clothing isn't equipped with MOLLE webbing.

-
Mine either. I was hoping to mod it to work which is how I lost the screw
. I thought the kydex would work with a leather backer, it didn't. I am not out much and would still like to figure how to use it. In the mean time I made that leather sheath for it. Lesson learned, not everything is moddable at least by me.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

