Curl Owners Club
-
@Poncho65 said:
It doesn't work with the LM bit driver. I was answering David Bowen in this post
He was wanting to know about tools for maintenance on the LM tools themselves
Sorry for the confusion :ahhh 
Oh yeah, I was confused! No worries though.
I’m always running into odd screw heads though, so I still might pick one of those sets up some time. I have something similar but with less variety in the set.
-
My Curl mod on the left 🥰

-
So you finished it?!? :ahhh Congratulations

Great pic as well 8)

-
Pics :ahhh :ahhh :ahhh

:D
-
So after a year and a half delay on finishing my Curl mod, I finally found the time to finish. I wanted to put a utility blade holder in place of the file since I break down so many boxes. I had all of the parts and equipment lined up - I just needed a lot of time for patient grinding... and after hours of careful grinding, my plan failed.
I couldn't get the utility blade to seat low enough or secure enough where I felt it would be safe to carry. After much internal debate, I decided there is no way I can make a utility blade mod safe, so I threw in the towel. I did, however, replace the Curl pliers with Rebar pliers for the sweet replaceable wire cutters. 
So here it is in its final (?) form. It's a Curl +
154CM Blade
small bit driver (removed scissors)
replaceable wire cutters (Rebar pliers)
-
Congrats, Rich
looks great

-
Thank you

-
Very nice, Rich

-
Thank you

-
I ordered a Curl last week when they went on sale. Thought they were being discontinued (give me a break, I'm still new).

Anyhow, it arrived early this week. Not sure how to feel about it. If I didn't have a MT, I'd think it was great. It has everything that I would want and use on a daily basis. I'd want a saw for survival/camping, but didn't have one for 25 years when all I had and carried was my PST.
That said, there are some issues with it that I don't like.
- It came with a pocket clip and I don't use them. LM charges $10 for them for other tools, so if they have to have their $10 why can't I buy it without one and save more money?
- The pliers close to where the wire cutters just start to come together and then there's friction because the cutters actually have interference. Never saw that before and it's annoying.
- This whole ONE HANDED OPERATION thing is just a gimmick 99% of the time (how many situations are you in where you absolutely have to keep one hand on something while opening a tool??). Getting the knife opened is harder because the tool doesn't have the thickness of the others like the Surge and Wave. But since it's designed to be opened one handed, your brain tells you that's how it's done instead of using your other hand like on a ST or Rebar, etc.
- Getting some of the tools out is actually hard. To open the bit holder takes a lot of strength and seems like you're going to rip out a fingernail. Not sure if it's overtightened screws or the friction lock design.
I do like the non-locking tools. Having carried a tool without locks for so long, I find myself forgetting to unlock them all the time when trying to put them away on the modern tools now. If I could get this thing loosened up somehow it might be a welcome EDC in the rotation. And THANK GOODNESS it doesn't have that stupid micro driver that I have yet to use anywhere and note that I wear glasses and so does everyone in my family! LOL If nothing else maybe someday I'll swap the MD from the Wave into this thing and put the 1 million percent more useful Awl in my Wave.
Overall I don't recommend this tool unless the Surge/Wave/Charge series is your fav or you want to expand your LM collection. I'd honestly consider getting 2 multijunks at Wally World instead.
Craig
-
I agree with you on most points but I do need one hand opening blades and that is why I swapped away from Supertools and Rebars a few years back
I still carry them some but that is because I have my Charge Knife ;) I do agree that the price is to high though and even before the price hike early this year, I thought it was overpriced
I bought one when they first came out and used a coupon code and free shipping froma site and got it for a much better deal 
As far as being hard to open, they shouldn't be but LM says they do this so the tool will break in better
I always tension any tool I get and plan on using but you really should never have to 
-
I disagree with about every point, but differing opinions are why we have such a awesome variety of tools.

- I love that the Curl includes a pocket clip
- A one-hand opening blade is a "gimmick" I want 99% of the time, and the Blade on both of my Curls open as smooth as silk.
- The Curl being thinner than a Wave/Charge/Surge was a huge selling point for me.
- The micro driver is so useful to me that I replaced the Curl's scissors with one. I use it for electronic equipment, not glasses.
-
My only problem with the curl was the pliers head, but that was simple enough to resolve. Easily becoming one of my favorites to carry at work.

-
Nice plier head swap, Bill

-
Thanks, Poncho! I’ve got a few more mods planned for some of my other MTs but I need to get my hands on a parse wrench first.
-
Hate to say it in the Curl thread, but everything you’ve all talked about on this page, from decent one hand opening to better pliers to an awl and saw sounds like you all need a Free P4…
I’ve considered a Curl as I don’t actually have a member of the Wave family (except a Surge), but I think I might add a P2 for everyday carry when I don’t expect to need a saw.
If the discount on the Wave or Curl had made it to this side of the Atlantic it might have been a different story.
-
Personally I’m not a fan of the Free series. Too many screwdrivers, a file that is near worthless imo, a pry tool/package opener that will not only most certainly break but I’m fairly certain is actually just ANOTHER screwdriver and no bit driver? To each their own, I’m sure it’s a great MT for a lot of people but it’s definitely not for me.
-
Yeah, I am not a fan of the Free series I have a cpuple P2s and still.am.trying to find a cheaper P4 ;) it's because of the tiny file (I use a file as much as a knife sometimes) and lack of bit driver
I like the Wave/Charge/ Curl platform much better
that may change with the ARC if it is anything like the 40th Anniversary tool though :D time will tell 
-
@BillBarrels said:
My only problem with the curl was the pliers head, but that was simple enough to resolve. Easily becoming one of my favorites to carry at work.
I did the same thing
Great mod! 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login