Original Supertool Owners Club
-
New OG STs are the best

-
Love that the Leatherman collection is on display today, Rich

If only you had a sturdy dining table to assemble them and photograph them all at once. I wonder who could help you find one

-
because it took me forever to find mine :ahhh :D -
Can't wait to see what you get then

:D
-
I used mine for the first time in a long while now. Had to unbox a picnic table for my sidekick. Still going strong after many many years.
-
They are almost bomb proof

-
I'll second that!

-
Gotta agree with those statements. 👍
-
Bought what amounted to much used/perhaps abused example for not much.

Jaws wouldn't open as the wire cutters had a folded edge jamming them.
Unfortunately the small screwdriver snapped with a spark no less the second I tried to straighten it in the vice.
I reworked the stump as best I couldNo saving the serrations so reprofiled to a good edge
Sorted the tip and used diamond files to re edge the wire cutters. Did the twist the pivot trick I learned here to take out the slop in the Jaws. I don't mind the bite marks I left doing this.
Asswmbles it all, oiled and loctited it all together once the action was good.
Despite the very tough abuse it's once again as functional as when new, a tank.
I dislike the lock, if I could mod it to be non locking I would. I sharpen my blades to a keen edge and find unlocking blades cumbersome. Maybe I'll get used to it. -
For as many problems as it had, you did a nice job bringing it back to working order

Great pics as well

-
@Poncho65 said:
For as many problems as it had, you did a nice job bringing it back to working order

Great pics as well

I have about six old school LM tools from the nineties and all were bought second hand, most in rough condition. It's testiment to the build quality and toughness that an hour of fettling has them ready for another thirty years of work.
Just wondering, do you know of any mods to remove the locking ability of this tool?
-
You would probably have to take the tool apart and grind each tool so that they won't engage in the lock

I don't really have a problem with the locks and it is a good trade off to how small it is comparatively to all the other tools in the Supertool family

-
@Poncho65 said:
You would probably have to take the tool apart and grind each tool so that they won't engage in the lock
I don't really have a problem with the locks and it is a good trade off to how small it is comparatively to all the other tools in the Supertool family

I think I'm getting the hang of the lock in use now Poncho. I had tightened the pivots a bit too much.
I have now set the tension so the tools are retained in the handle without flopping out, even with a smack of the hand. Before they were too tight and cumbersome to pull out to unlock with.
I had a couple jobs in the house and garden today and its like a pst on steroids. -
Tensioning does wonders for LM MTs

Glad you got it better

-
Nice pics, Poncho

-
@ed_is_dead said:
Bought what amounted to much used/perhaps abused example for not much.Jaws wouldn't open as the wire cutters had a folded edge jamming them.
Unfortunately the small screwdriver snapped with a spark no less the second I tried to straighten it in the vice.
I reworked the stump as best I couldIt will do.
No saving the serrations so reprofiled to a good edge
Sorted the tip and used diamond files to re edge the wire cutters. Did the twist the pivot trick I learned here to take out the slop in the Jaws. I don't mind the bite marks I left doing this.
Asswmbles it all, oiled and loctited it all together once the action was good.
Despite the very tough abuse it's once again as functional as when new, a tank.I dislike the lock, if I could mod it to be non locking I would. I sharpen my blades to a keen edge and find unlocking blades cumbersome. Maybe I'll get used to it.
Great job Ed !
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








