Show off your Sak mod's!
-
Ok, I have buying a lot of Ali express lately. Sometimes you get ripped off, but I have to admit I am all about these prefab titanium 2 and 3 layer sets they sell. Basically, this mod is now a modular Spydernox (K390 blade on this one) with 93 mm bottle opener. Think all of you guys should try these out.




-
@Enginears said:
My “Devolution 14”. Those scales and shape were just a little too evolved for me. I may end up thinning these out to match the height of the bushings, have not decided.
[attach id=1 msg=2417146] [attach id=2 msg=2417146] [attach id=0 msg=2417146]Wow! That looks great as is. Maybe it gets some dirt in the bushings' holes, but it's quite unique.

-
@pa_strunk said:
Ok, I have buying a lot of Ali express lately. Sometimes you get ripped off, but I have to admit I am all about these prefab titanium 2 and 3 layer sets they sell. Basically, this mod is now a modular Spydernox (K390 blade on this one) with 93 mm bottle opener. Think all of you guys should try these out.Looks great, but I'd prefer a CS and an added keyring.

-
This is my first attempt at making custom scales for a SAK.
I had a small piece of 0.090" 2024-T3 aluminium left over from another project, so I decided to try my hand at making some scales for my 84mm cellidor Bantam.
The scales were machined and drilled on a CNC. I used 3/32" 360 brass dowel pins which were sanded down to fit the 2.25mm holes on the implements.
At first I tried not using the original liners to make the final product thinner, but it ended up being too tight. I figured that the embossing on each side of the liners has something to do with that. I must read all the wonderful guides found here to better understand :)
I decided to keep all the scuffs and nicks on the raw aluminium as I find it makes the knife look well worn and used, even though the original Bantam was only a week out of it's original box!
You can also see my first attempts at trying to mark the blade with a CO2 laser using Laser Bond 100 marking material. For some reason, it would not bond correctly on the Victorinox steel, even though I was very successful on other stainless steels, work in progress.



-
Another modded SAK made for my everyday carry. I combined the Victorinox Compact and added the inline Philips from the Explorer to create the Yeoman. Swapped out the main blade for the Spyderco Grasshopper. Tools were acid-etched and stonewashed. Brass liners were handmade, then forced patina and stonewashed around the edges.
[attach id=0 msg=2419182]
[attach id=1 msg=2419182]
[attach id=2 msg=2419182]



-
That looks great. -
@Robinlong said:
This is my first attempt at making custom scales for a SAK.I had a small piece of 0.090" 2024-T3 aluminium left over from another project, so I decided to try my hand at making some scales for my 84mm cellidor Bantam.
The scales were machined and drilled on a CNC. I used 3/32" 360 brass dowel pins which were sanded down to fit the 2.25mm holes on the implements.
At first I tried not using the original liners to make the final product thinner, but it ended up being too tight. I figured that the embossing on each side of the liners has something to do with that. I must read all the wonderful guides found here to better understand :)
I decided to keep all the scuffs and nicks on the raw aluminium as I find it makes the knife look well worn and used, even though the original Bantam was only a week out of it's original box!
You can also see my first attempts at trying to mark the blade with a CO2 laser using Laser Bond 100 marking material. For some reason, it would not bond correctly on the Victorinox steel, even though I was very successful on other stainless steels, work in progress.
I like that! I agree that the scuffs and nicks look good. As you use it the wear will make it even better.
.
@eugenewee89 said:
Another modded SAK made for my everyday carry. I combined the Victorinox Compact and added the inline Philips from the Explorer to create the Yeoman. Swapped out the main blade for the Spyderco Grasshopper. Tools were acid-etched and stonewashed. Brass liners were handmade, then forced patina and stonewashed around the edges.The contrast between tools, liners and scales is very nice. How much did this end up weighing? Good work.
-
Thanks! :D
@Enginears said:
I like that! I agree that the scuffs and nicks look good. As you use it the wear will make it even better..
The contrast between tools, liners and scales is very nice. How much did this end up weighing? Good work.Thanks! :D Weight-wise, the brass liners added about 20 grams for a total of 108 grams. Not too bad, I guess.
-
84 mm comb solo



-
If I wasn’t bald I’d be all about that comb. What do you guys think about these Chinese titanium scale sets? I like them for trying out odd ball tool combos like the one below.


-
Nice

@pa_strunk said:
If I wasn’t bald I’d be all about that comb. What do you guys think about these Chinese titanium scale sets? I like them for trying out odd ball tool combos like the one below.I think it looks good!

-
I just finished my first SAK mod, a Hiker from which I removed the openers, put the awl where the back Philips was and changed to screwed on G10 scales. It was a bit of a struggle getting the last liner on and I had to bend the saw away from the outside scale but I got there!




Sent from my SAK using Tapatalk
-
Nicely done.
-
-
Keep 'em comin!' -
Got the itch to do a two blade SAK mod and need some help naming it. Any thoughts?



-
Nice mod! I have been thinking about doing one with the dual blades but never got around to it. Looks, but I don't have any name suggestions
-

"Double-edged sword"?
-
“Double edged sword” is far better than anything I could come up with myself.
Usually you could say some standard version with “compact” or “plus” modifier, but “Compact Champion Plus”seems wrong without the magnifying glass. Made this model to be a five layer pocketable SAK to pair with Leatherman Mini or Knipex pliers. -
@pa_strunk said:
Got the itch to do a two blade SAK mod and need some help naming it. Any thoughts?How about pfrsantos's EDC SAK? You just have to send it to me, so the name is correct...

:D :D :D :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login