Tween Challenge - 84 and 85mm SAKs
-
I’ll often use the scissors to trim most of the glue from a rolling paper- just leaving a thin strip. I’ll then use the scissors to trim the rolling paper smaller lengthwise so as to have only one layer of paper around the smoke. It takes a bit of craftiness but the results are well worth it

Awlso, thanks Dan for the advice and great shot of the Bantams

Found a silver one for cheap but now I’m thinking might have to get a red one…
or heck maybe both! :ahhh -
Day 30 of 30

For the last day, I selected two;
The Cadet, Alox silver, was freed from its package for this challenge. Purchased a few at a pawn shop for about $20, I gifted the two black ones at Christmas time to Son-n-Laws (2)Kept this one, and decided I should try it, this month. It it is slim, disappears in the pocket, so now place in a slip. Pleased with its function, really would like a Blue one to match my Farmer.
[attach id=0 msg=2424911]
The EVO grip 14 was new in May, arrived along with the S101. I unfortunately have not used much this past 30 days, my fault.
I however, must say this tool has utensils that I use and find comforting to have at my side. A very nice 3-layer 85mm. PS: Nail file fade out from the blade👍On ward to the Dean Memorial in July.
It has been a pleasure sharing this month with each of you. Enjoy Ron’s pictures and variety of beer he enjoys. MTSak’s has definitely posted the most lovely pictures from his part of the world. Comis sharing his family life be the always prepared dad for his son and toys.
Echotech, best wishes on your recovery and I do enjoying time reading about your life down under. Surge UK I do hope you survived the Italian invasion, hope hours become more consistent this summer.To AWL others not mention, it is my pleasure

And last but not least our HOST! SOS24, thank you for assembling this challenge, great job, and inspiration to snag not one but two SwissBucks.
Long live the 84/85 platform🌹
-
Day 30 of 30:
This has only been my second challenge since joining, but I love it! I appreciate all of the effort to organize and participate in this challenge from everyone and for all of the kind comments. I can't wait for the next two I'm signed up for. I'll have 92 days of straight challenges by the end of August! This morning, I received a Victorinox storage pouch in the mail, and my Tinker Small freed jt from the packaging. When we go on trips, I always bring multiple knives with me, so this will be a welcome addition to having a bunch of loose knives in my backpack getting banged up. Just in time for a week long trip to see family and attend my cousin's wedding next weekend. Once again, thanks everyone, and for whoever is participating in the Trad challenge, see you tomorrow! 😁 [attach id=0 msg=2424947] [attach id=1 msg=2424947]
-
Day 30
Beer 30
It´s been fun to lift 30 different caps in 30 days.

I´m surprised I didn´t use the main blade very much and the saw not at all. Totally contrary to my expectations.

-
Don´t forget to apply for the badge!

-
Day 30

Delemont liberated a backpack for emergency use.
Thank you Sos24 for hosting this great challenge. Earlier this year, after reading the sad news that many models on this challenge may soon be discontinued, I can't help but get the feeling that this is the one last ride we could all enjoy.
And I am so glad I got the change to jump on this boat, and once again it reminded me how nice these models are in hand and for EDC carry. I surely hope by establishing this new badge, some of us could get together once in while, to celebrate these models before they are long forgotten.
Thank you for everyone joining this challenge, see you in the next one or out on the forum!
-
It's definitely not the end with my Cadet. It's been in my phone case ever since I got it. It's kinda difficult to remember to take pictures every day which is why I try not to sign up for back to back challenges.
I hazard to say that my Cadet along with one of the MiniChamps will show up in August for the Alox challenge.
[attach id=0 msg=2424970]
Until then, it's been a fun month.Thanks to Sos24 for putting it together and to everyone else for showing off their tweens.

-
@Sos24 said:
Day 29
Opened a popsicle and cut so,e treats for Fisher


Never gets tired looking at this mod, beautiful!
@Echotech said:
Here’s most of the collection, as I say above a definite fave size



Nice collection!
@Farmer X said:
Thanks, Echotech!
Here's a group of Bantams from last year's SAKtember. One of the red Alox ones has gone on to an MTo member in Germany.[attach id=0 msg=2424812]
As much as I like the usefulness of the openers on regular 91mm models, I really do enjoy the combo tool on the slimmer models of SAK.
-
@Canuckdad said:
Day 30!!!!!!!#Sportsman
Tomorrow is Cananda day so I just HAD to post this.
Its been a fun challenge, and it was great to see all your SAKs
Have a great weekend, great to have you on the challenge!

@LoopCutter said:
Day 30 of 30

For the last day, I selected two;
The Cadet, Alox silver, was freed from its package for this challenge. Purchased a few at a pawn shop for about $20, I gifted the two black ones at Christmas time to Son-n-Laws (2)Kept this one, and decided I should try it, this month. It it is slim, disappears in the pocket, so now place in a slip. Pleased with its function, really would like a Blue one to match my Farmer.
[attach id=0 msg=2424911]
The EVO grip 14 was new in May, arrived along with the S101. I unfortunately have not used much this past 30 days, my fault.
I however, must say this tool has utensils that I use and find comforting to have at my side. A very nice 3-layer 85mm. PS: Nail file fade out from the blade👍On ward to the Dean Memorial in July.
It has been a pleasure sharing this month with each of you. Enjoy Ron’s pictures and variety of beer he enjoys. MTSak’s has definitely posted the most lovely pictures from his part of the world. Comis sharing his family life be the always prepared dad for his son and toys.
Echotech, best wishes on your recovery and I do enjoying time reading about your life down under. Surge UK I do hope you survived the Italian invasion, hope hours become more consistent this summer.To AWL others not mention, it is my pleasure

And last but not least our HOST! SOS24, thank you for assembling this challenge, great job, and inspiration to snag not one but two SwissBucks.
Long live the 84/85 platform🌹Great wrap, thank you for the mention and see you on Dean's trad challenge!

-
@Storm said:
Looking forward to the freedom to carry some of my other knives, both larger SAKs and other more modern type offerings.Which larger SAKs? 111mm?
@Barry Rowland said:
I've been a Wenger lover for years now, and only wish this size SAK would get the attention they deserve.:iagree: Give us a few more 84mm models instead of spendy limited editions and another Classic SD!
@Explorer said:
Thanks Dan for the advice and great shot of the Bantams :drool:
Found a silver one for cheap but now I’m thinking might have to get a red one…
or heck maybe both! :ahhhMy pleasure! If red trips your trigger, here you are. Note that those will have the retailer's logo on the engraving panel. I don't know of a source for a red Alox Bantam without a logo.
Swiss Army Bantam Alox - Red
Shop over 20,000 knives from Kershaw, Spyderco, Microtech, Benchmade, and more. Hard-to-find knives, DLT-exclusive deals, and custom knife engraving.
DLT Trading (www.dlttrading.com)
@LoopCutter said:
Pleased with its function, really would like a Blue one to match my Farmer.Easily found, if you don't mind a retailer's logo. Again, I don't know of a source for one without the logo.
https://www.dlttrading.com/swiss-army-cadet-blue-green
Thanks again to awl who have made this a terrific challenge, and thanks to Sos24 for hosting! :cheers:
-
@Farmer X said:
Which larger SAKs? 111mm?
Give us a few more 84mm models instead of spendy limited editions and another Classic SD!
My pleasure! If red trips your trigger, here you are. Note that those will have the retailer's logo on the engraving panel. I don't know of a source for a red Alox Bantam without a logo.https://www.dlttrading.com/swiss-army-bantam-alox-red
Easily found, if you don't mind a retailer's logo. Again, I don't know of a source for one without the logo.
Swiss Army Cadet | Blue | Green
Purchase all of the Victorinox Cadet Colors available online with DLT Trading! The Cadet Alox is a popular choice from Swiss Army, and for good reason.
DLT Trading (www.dlttrading.com)
Thanks again to awl who have made this a terrific challenge, and thanks to Sos24 for hosting!

Wowzers, thanks for the link Dan.
Sticker shock🤪The Silver Cadet I broke free this month was found at pawn shop in the package for less than 20 bucks. Had 3 and left with awl 3. Of course that was a few years ago. Still have a Wenger Traveler in the package, and a Tech Climber.
But, I do like the blue Alox. 🥹
-
Tween Challenge
Day 30 of 30
Victorinox CadetThanks for hosting a great challenge Sherry!
As has been noted several times already, the 84/85mm SAK's are a sweet spot for me too. They are indeed the perfect size for pocket carry. Being able to use my Cadet for the challenge was a lot of fun also!!
Thanks to everyone that shared some very, very great pictures and posts!
Edit- Just saw the badge for the first time,,,, SUPER SWEET BADGE!!!

.jpg)
-
93mm, specifically my Farmer.
Ironically, given your username I'm currently tossing up/trying to justify getting a Farmer X. Havent been able to find one in a store to have a feel of, but think the extra scissors layer will feel better in the hand and provide another tool for at work, with the ruggedness of Alox -
Day 30:
Bit of a boring end to this one, given my general posting history and the tales behind them. The wife had an important work call with some 2-Star Generals, so it fell to me to keep the girls quiet.
Easy job, take them out for food and a Chocolate Babyccino, while streaming episodes of Paw Patrol and Bluey.Food was a Cheese & Bean Toastie, which of course needed splitting between them:
[attach id=0 msg=2425022]
Sincerest thanks to Sos24 for coming up with this one, and for everyone who took part, which inspired me the extra challenge of doing it entirely with the one SAK that I rarely even carry for more than a few hours on special occasions!!
If I'd gotten those Wengers a little earlier, I'd have picked one of them... Probaby the Nomad - I've really missed my ILP!!
I do love the Tween size, although it's more of a cuteness thing with my large hands. I'll likely continue to carry one as a backup, albeit one with many more layers than the Sportsman!!
-
@LoopCutter said:
The Silver Cadet I broke free this month was found at pawn shop in the package for less than 20 bucks.Wish I could find deals like that!
@GA1dad said:
Being able to use my Cadet for the challenge was a lot of fun also!!I bet it was! With my Alox-Pox suddenly worsening, acquiring a Cadet has become a higher priority.
@Storm said:
I'm currently tossing up/trying to justify getting a Farmer X. Havent been able to find one in a store to have a feel of, but think the extra scissors layer will feel better in the hand and provide another tool for at work, with the ruggedness of AloxGo for it! The biggest thing with 93mm scissors is that the nail nick is on the opposite side relative to a 91mm. It just takes a little getting used to.
@Tasky said:
Easy job, take them out for food and a Chocolate Babyccino...BBabyccino? Are you already trying to instill in them a love of coffee?
-
** Day 30**:
Well there it is. I end this challenge on a travel day, headed to the mountains with my dachshund posse.
It has indeed been an excellent challenge. Truly the easiest challenge for me yet. The Micarta Walker started as just my carry for the first day, but ended up glued to my hand for the entire month. It’s a sensational lightweight carry for an outdoorsman during the hotter days of summer.

-
Cute pups!

-
[emoji240][emoji240] 
-
@LoopCutter said:
Day 30 of 30

For the last day, I selected two;
The Cadet, Alox silver, was freed from its package for this challenge. Purchased a few at a pawn shop for about $20, I gifted the two black ones at Christmas time to Son-n-Laws (2)Kept this one, and decided I should try it, this month. It it is slim, disappears in the pocket, so now place in a slip. Pleased with its function, really would like a Blue one to match my Farmer.
[attach id=0 msg=2424911]
The EVO grip 14 was new in May, arrived along with the S101. I unfortunately have not used much this past 30 days, my fault.
I however, must say this tool has utensils that I use and find comforting to have at my side. A very nice 3-layer 85mm. PS: Nail file fade out from the blade[emoji106]On ward to the Dean Memorial in July.
It has been a pleasure sharing this month with each of you. Enjoy Ron’s pictures and variety of beer he enjoys. MTSak’s has definitely posted the most lovely pictures from his part of the world. Comis sharing his family life be the always prepared dad for his son and toys.
Echotech, best wishes on your recovery and I do enjoying time reading about your life down under. Surge UK I do hope you survived the Italian invasion, hope hours become more consistent this summer.To AWL others not mention, it is my pleasure

And last but not least our HOST! SOS24, thank you for assembling this challenge, great job, and inspiration to snag not one but two SwissBucks.
Long live the 84/85 platform[emoji257]Thanks LC

I think you’ll like that Evo14, it’s a great model
Hope the smoke clears up soon for you (and the fires are put out very soon), gets tough on the lungs and eyes after a while I well know

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login