*** The Dean 51 Traditional Challenge 2023 ***
-
@LoopCutter said:
Day 1Good morning MTo!
My EDC this cloudy with a rain threat are two Case models,
A Scout Jr (just a followup on the tween month!)
[attach id=0 msg=2425206]And, my Yellow Sod Buster (that has been sitting on the counter seems like forever)
[attach id=1 msg=2425206]AWL the kids are kids getting together for pool party with good food. Grandkids too, this afternoon, hoping the rain stays away.
Love that Scout Jr.

-
@MTSAK said:
I've got a few options to choose from, but I'm not sure where I'll start. I carry a CV Peanut every day mostly for sentimental reasons. My wife gave it to me the first Christmas we were married and it's been in my pocket every day since then almost 11 years ago. I love the Trapper pattern, too, so those will make some appearances. It's just hard to carry them in light summer clothes. I've got a few packed away for my trip this week, so I'm looking forward to carrying a Case after SAKs for the last few years. [attach id=0 msg=2425113]Not been into Traditional knives for a long time but with limited experience the Trapper is my favorite pattern.
This is my solution for summertime carry.

Also have a vertical sheath that fits them.
Forgot to add I accidentally ordered the wrong color sheath for this one. It’s fine but the Buffalo color is way nicer imo.
-
@LoopCutter said:
Day 1Good morning MTo!
My EDC this cloudy with a rain threat are two Case models,
A Scout Jr (just a followup on the tween month!)
[attach id=0 msg=2425206]And, my Yellow Sod Buster (that has been sitting on the counter seems like forever)
[attach id=1 msg=2425206]AWL the kids are kids getting together for pool party with good food. Grandkids too, this afternoon, hoping the rain stays away.
Is that a full size or Jr.?
-
@HarleyXJGuy said:
Not been into Traditional knives for a long time but with limited experience the Trapper is my favorite pattern.This is my solution for summertime carry.

Also have a vertical sheath that fits them.
Forgot to add I accidentally ordered the wrong color sheath for this one. It’s fine but the Buffalo color is way nicer imo.
I was in the market for a pancake sheath for a trapper a while back but couldn't find anything I wanted to take a chance on and I lost interest. I may have to start lookin again. I like yours!
-
@Farmer X said:
We are off to a great start, y'awl!
Day 1
I'm starting off with a 3137 CV. This one is not going on the chopping block. It's shown with the sheath I carry Sod Buster Jrs in, plus the belt buckle I'll be sporting throughout July.
Fun fact: this pattern is often referred to as a Sod Buster regardless of who manufactured it, but Case trademarked the name.
[attach id=0 msg=2425140]
Love everything about this Farmer.
Where you get that sheath?
Off to Google to find a Case belt buckle.
-
@MTSAK said:
I was in the market for a pancake sheath for a trapper a while back but couldn't find anything I wanted to take a chance on and I lost interest. I may have to start lookin again. I like yours!I have no dog in the race but this dude does great work and will make custom also.
Had him down size a vertical sheath to fit Mini Trappers.
-
Day 01

Large stockman start the day with a packet coffee.
Howdy! It's great to be here again, and seeing many familiar faces on this challenge! Can't hardly believe another year has passed, and look forward to everyone's carry in the upcoming month.
-
@Farmer X said:
We are off to a great start, y'awl!
Day 1
I'm starting off with a 3137 CV. This one is not going on the chopping block. It's shown with the sheath I carry Sod Buster Jrs in, plus the belt buckle I'll be sporting throughout July.
Fun fact: this pattern is often referred to as a Sod Buster regardless of who manufactured it, but Case trademarked the name.
[attach id=0 msg=2425140]
What a nice belt buckle and didn't know Sod buster is a trademark name.
@Barry Rowland said:
Day 1: Here we go! 3 very special No. 8's.Wow, didn't know they have these unique handles, nice trio!
-
@HarleyXJGuy said:
Is that a full size or Jr.?The Scout is a Jr!
The Soddy is also a Jr, it is the one I had to scrape the black crud off the blade as it is CV and previous owner knew not how to care for it. A 3137 CV😍 that luv. Blade takes and holds an edge very very well.
SteveC turned me on to CV steel in Case models, primarily for the natural patina. And you enlightened me with your eye for yellow vintage models.
I do have a couple 3138s in Navy Blue, one will make an appearance later in the month if not sooner😉
You are searching for a 38 in Yellow?
-
@comis said:
Day 01

Large stockman start the day with a packet coffee.
Howdy! It's great to be here again, and seeing many familiar faces on this challenge! Can't hardly believe another year has passed, and look forward to everyone's carry in the upcoming month.
Good to see you here too buddy.
Great knife to kick things off with. -
@comis said:
~
Wow, didn't know they have these unique handles, nice trio!I believe these fancy limited edition #8s are yet listed on the Web site, Opinel’s or was it SMKW😉. Not pushing just suggesting. 😆
Sold out in the US but made be not for you!
https://www.opinel-usa.com/collections/classic-folding-knives/products/2021-edition-iii-escapades-no-8-folding-knife -
@LoopCutter said:
You are searching for a 38 in Yellow?He has jokes.
I am searching for everything in yellow, but a 38 is top of the list.
-
@HarleyXJGuy said:
He has jokes.I am searching for everything in yellow, but a 38 is top of the list.
. I will help ya AWL!
CV or SS? New or used?PM me your address, if I locate one and can direct ship I will, be assured it be of quality I would covet!😅
-
@HarleyXJGuy said:
He speaks truth.Large Stockman is best Stockman, prove me wrong.
47 or 75?
Both are nice in my eyes, I have 1, 75(new) and a couple 47s.
-
Day 1
2014 Case T.B.6339 CV Sowbelly in Jigged Chestnut bone.

-
@HarleyXJGuy said:
Large Stockman is best Stockman, prove me wrong.See pic above /. :D
Beautiful stuff in here today everyone!!
-
Day 1
We are off to a great start

Just got back from the dog park and it's a lovely morning. Along the fence line at the dog park there are wild blackberries. You can graze on the them as you walk. Unfortunately most are on the other side of the fence out of reach. Well I decided it was worth it to climb over the fence and do some berry collecting. My Old Stag Lamb came in handy clearing some brambles out of the way. 👍
Cassie wasn't too happy about being left on the other side but quickly got over it when I started feeding her berries through the fence. 😁
[attach id=0 msg=2425254]
[attach id=1 msg=2425254]Old Stag Lamb and a PAL Blade Co. Jack
[attach id=2 msg=2425254]
Some Info on he PAL Company
**Pal Blade Company purchased the cutlery division on January 17, 1941 from Remington-Dupont which had been located at Bridgeport, Connecticut. Remington sold the cutlery department in order to utilize the existing Bridgeport plant space for the production of munitions ( I believe for the production of the Model 1903 rifle for the British government - GMC).
Pal leased a 100,000 square foot facility in Holyoke, Mass. located on the west side of Bigelow Street between Appleton and Cabot Streets. This building had been the A building of the Farr Alpaca Company. Interestingly enough, part of this building in the 1800s had been the home of the Henry Seymor Cutlery Company, makers of shears and scissors.
Removal of the machinery to Holyoke began on February 4, 1941 with the move scheduled to be completed within 30 days. By March 1st they planned to be in operation with two shifts employing 300 workers, many of them women. Plans were to have 450 employees within 3 months, and they were advertising that the company would be the largest cutlery manufacturing company in the United States. Full production was to begin in June, 1941.
At the time, Pal Blade also had factories in Plattsburg, New York, Montreal, Canada, Newfoundland and South America. Owners were brothers Abraham Mallman of Montreal and Joseph Mallman of New York.
The above information was taken from the February 3, 1941 Holyoke Transcript-Telegram
During World War 2, the plant was converted to make bayonets, sheath knives, and pocket knives for US forces. Following the war, the name was changed to the Pal and Personna Blade Co., Inc. Other company plants were located in Montreal, Canada, Plattsburg, New York, Barranquilla, Columbia and Buenos Aires, Argentina.
By December, 1945 the plant had been converted to peace time products and expanded their product line to include many items which had been unavailable during the war and for which there was a large market. Under the Pal name they produced pocket knives, paring knives, slicing knives and kitchen utility items in the moderate price range. The Personna items included gift sets, carving sets, carving knives and kitchen knives in the higher price brackets.
Employment in 1946 reached 950 workers on two shifts. 7:00 AM to 4:45 PM (3:45 PM for the women workers) and another shift from 3:00 PM to 11:00 PM. The plant worked 5 ½ days a week, closing at noon on Saturdays. At the time the plant operated on two floors of 90,000 square feet each. The first floor contained most of the assembly lines and production tables, while the basement was occupied by store rooms, a maintenance shop and one work room where paring knives were made. (Note – the building no longer exists - GMC)
The above information was taken from the December 4, 1946 Holyoke Transcript-Telegram**


.jpg)
-
That Pal is one sturdy looking knife!
Around here where the blackberries are, the chiggers typically follow. I hope you avoided that!
-
Great kickoff, everyone

@Farmer X said:
Fun fact: this pattern is often referred to as a Sod Buster regardless of who manufactured it, but Case trademarked the name.Dang, now I *have to *buy a Sod Buster. :ahhh
@LoopCutter said:
A Scout Jr (just a followup on the tween month!)Now I'm checking eBay for a Scout Jr

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login