*** The Dean 51 Traditional Challenge 2023 ***
-
@LoopCutter said:
I wonder if CV is that much different than the new CS! In my catalog they use the interchange the terms, yet I think the CV steel is smoother and holds and edge much better.
CS has a grit texture, or maybe the way the steel is finished. I haven’t used a CS hard enough yet.There's plenty of info out there about the differences. Here's one example, but I don't know how trusted:
Chrome Vanadium vs. Carbon Steel: What's the Difference
Do you know what the difference between chrome vanadium and carbon steel tools is? If not, read this article to find out!
ThePipingMart Blog (blog.thepipingmart.com)
-
@NutSAK said:
There's plenty of info out there about the differences. Here's one example, but I don't know how trusted:
Chrome Vanadium vs. Carbon Steel: What's the Difference
Do you know what the difference between chrome vanadium and carbon steel tools is? If not, read this article to find out!
ThePipingMart Blog (blog.thepipingmart.com)
From my view that was my suspicion. CASE has certain models or lines of knife they promote as work knives and these are most commonly produced with CV steel for the long run, better life cycle. Then they have the SS material that was originally referred to ss Surgical Steel, yet the past couple years Stainless Steel has been associated as the same.
This is all most likely due to supply shortages of materials. CV is not available at same quantities and prices are higher, CS is less costly and easier to obtain. CASE indicating they are ramping up production and now the issue is personnel.
The same issue can likely be found in the stainless industry.
Surgical grade stainless is being directed to medical and industry willing to pay the price. And lower cost Stainless can replace it for consumer uses.Other knife manufactures are doing the same, offering more higher grade steels at premium prices, just fewer counts available.
And then the old standby 420HC is yet being employed but models sporting this steel has seen significant price increases as has occurred in other basic items.
Even Victorinox prices have gone up, but it appears quality is intact.The last 3137 Case SB jr I scored is CS, a 2021 model. So possible the change of CV to CS occurred with the COVID interruption.
Stepping off soap box
-
Day 7
The JOTS trimmed a cigar, and also popped the tape to open this delicious box of donuts.

-
Day 8
At son’s home to pick up crew and deposit at airport this early AM
[attach id=0 msg=2426902]
Orange Bone Wharncliff Copperhead

-
The knives on here are phenomenal! I didn't know there's such a variety of Sodbusters out there.
For Day 8.

-
@Rich_SD said:
I'm probably in the minority, but I prefer Case's stainless steel blades over this carbon steel.I don't know about Case's CS since I don't own any, but I do prefer their CV over SS. There's nothing wrong with their SS--it seems to perform as well as the SS that Victorinox uses--but in my experience the CV has better edge retention and is just as easy to sharpen.
I find that Case's CV is somewhat easier to maintain than other knives I have in 1095 CS and I've always felt that was due to the high polish they achieve on them, but that's just a theory. It could also be due to the use of the denser vanadium vs. iron in the formula.
@LoopCutter said:
The last 3137 Case SB jr I scored is CS, a 2021 model. So possible the change of CV to CS occurred with the COVID interruption.Case's blog article from 2/22 that I linked above states that the changeover started due to the pandemic. That seems to fit the timing of your 2021 SB jr. as well, as it says "in recent months". I suspect that the SB jr could have been changed over before other patterns since it seems to be one of their better selling ones and moves through blade stock inventory quicker.
In recent months, Case (and most every other American manufacturer) has encountered some disruption in availability of manufacturing materials. While we’ve been able to manage our materials inventory relatively well throughout the pandemic, it has become apparent that supply chain challenges will remain with the industry for a while.
-
@Sos24 said:
The new Soddie is beautiful and therefore not going anywhere.As far as donations, I recently made a large donation to two different wheelchair van funds, so the wallet is a little empty.
But just to tempt more…
Day 7
The Soddie got some sunlight

The Soddie also helped with some popcorn making - break up some garlic powder that the humidity had gotten to, cut up some firestarter for the twig stove. The spine is not sharp, so it didn’t work as a striker for the firesteel, so a Mora Kansbol did that.
That's is a very nice Soddy Sherry

Yes, the SS blades are usually polished too much for a firesteel.
-
@Farmer X said:
Another great day, y'awl!
Day 7
I was asked to peel and freeze some bananas, so I sacrificed a small piece of one.
[attach id=0 msg=2426843]
Let's see if we get "instant patina."
[attach id=1 msg=2426843]
Doesn't seem so.
I guess the bananas are a little more mild than lemon or vinegar, or maybe the banana didn't contact the blade long enough.[attach id=2 msg=2426843]
Thanks for trying out our for us :D No acidity I guess?


-
@LoopCutter said:
Day 8At son’s home to pick up crew and deposit at airport this early AM
[attach id=0 msg=2426902]
Orange Bone Wharncliff Copperhead
Now that's an interesting one

-
@Barry Rowland said:
The knives on here are phenomenal! I didn't know there's such a variety of Sodbusters out there.For Day 8.
...or Opinels! -
@LoopCutter said:
Another calendar picture Gareth!
You Sod Buster does not appear to see day light often, it is pristine[emoji106]
Colt good looking picture. Please share what this model is, Medium Jack or Texas Jack!
Here you go, 62032 small Texas Jack. Gift from Steve years ago [emoji106]
Sent from my iPhone using Tapatalk
-
Thank you Colt

@McStitchy said:
Now that's an interesting one
When the Copperhead was the Case Vault pattern in 2021 (?) this was a SMKW exclusive!
Both blades are identical, I wish they would have had one Plain Edge Wharncliff and then other with PE/SE combo. It would have made a better exclusive in my book. -
Just for reference, I always am impressed by Tony Bose’s Tribal lock pattern, and yes I have a few.
It compares very much in size to my other favorite, the Buck 112 Ranger!
Here the Tribal pictured with my 112 Slim Pro
[attach id=0 msg=2426930]
-
Day 08
While we're comparing this morning I was just looking at some 84 and 85mm SAKs against the Case 63087
-

Sent from my iPhone using Tapatalk
-
@LoopCutter said:
Just for reference, I always am impressed by Tony Bose’s Tribal lock pattern, and yes I have a few.It compares very much in size to my other favorite, the Buck 112 Ranger!
Here the Tribal pictured with my 112 Slim Pro
[attach id=0 msg=2426930]Nice!
Sent from my iPhone using Tapatalk
-
@LoopCutter said:
Thank you Colt
When the Copperhead was the Case Vault pattern in 2021 (?) this was a SMKW exclusive!
Both blades are identical, I wish they would have had one Plain Edge Wharncliff and then other with PE/SE combo. It would have made a better exclusive in my book.I'm with you on that... and good I don't have to look out for it being not available :D
-
@LoopCutter said:
Just for reference, I always am impressed by Tony Bose’s Tribal lock pattern, and yes I have a few.It compares very much in size to my other favorite, the Buck 112 Ranger!
Here the Tribal pictured with my 112 Slim Pro
[attach id=0 msg=2426930]Nice knife
I didn't realize those were so large. At that size, they need a pocket clip option. Still, I am tempted... :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login