*** The Dean 51 Traditional Challenge 2023 ***
-
@McStitchy said:
Congrats on your new Opi LC
How's the sheath?
You asked! I finally cut seal and inspected.
The sheath is made of a leather material, thin, but well condition and soft, but any smell I can sense is likely the dye. Thread stitching is excellent but only single stitched, not double.
I will attach photos😉
[attach id=0 msg=2427684]
[attach id=1 msg=2427684]
[attach id=2 msg=2427684]I will not put this on my belt via the loop, it may have good tensil strength but not for me to test.
I will however will carry the knife in its sheath and let it right INSIDE which ever gear bag is being employed for my adventure.I am surprised by the thinness of the blade😉 it is about the same has my kitchen paring knives, maybe thinner. I will need to strop and oil the pivot as it sounds like a shred cutting paper, and stiff to open and close. Different not having a back spring.
The .06 arrived sharp and much smoother in opening and closing.Both handles are handsome and it is surprising to me how light these knives are.
Impressed so far.


-
@RF52 said:
Ooh, I remembered something I heard somewhere, sometime.
And that is they used to quench the blades when hardening in blood from stabbing humans, which falls into the category I'm not really sure happened or if it was more of a scary story
Sent fra min M2002J9G via Tapatalk
Animal blood, just unsure what type of animals or how it was determined that would provide the function desired. 🫣
-
That might be it

Still not sure how good of a quench media that would be though.Sent fra min M2002J9G via Tapatalk
-
Day 11
Axe Lamb and a Loom Fixer

-
@LoopCutter said:
I am surprised by the thinness of the blade😉 it is about the same has my kitchen paring knives, maybe thinner. I will need to strop and oil the pivot as it sounds like a shred cutting paper, and stiff to open and close. Different not having a back spring.
The .06 arrived sharp and much smoother in opening and closing.The grind on them is slightly convexed and very thin behind the edge. Very slice-y with a proper edge on them.

-
@LoopCutter said:
You asked! I finally cut seal and inspected.The sheath is made of a leather material, thin, but well condition and soft, but any smell I can sense is likely the dye. Thread stitching is excellent but only single stitched, not double.
I will attach photos😉
[attach id=0 msg=2427684]
[attach id=1 msg=2427684]
[attach id=2 msg=2427684]I will not put this on my belt via the loop, it may have good tensil strength but not for me to test.
I will however will carry the knife in its sheath and let it right INSIDE which ever gear bag is being employed for my adventure.I am surprised by the thinness of the blade😉 it is about the same has my kitchen paring knives, maybe thinner. I will need to strop and oil the pivot as it sounds like a shred cutting paper, and stiff to open and close. Different not having a back spring.
The .06 arrived sharp and much smoother in opening and closing.Both handles are handsome and it is surprising to me how light these knives are.
Impressed so far.Thank you very much Sir :hatsoff:
That doesn't sound and look too bad at all :2tu:Due to their thinness behind the edge they're easy to sharpen. On my new Padouk handle one the polished any edge completely away so I put a new 20° one on it with my guide Lansky. Came out really good.
30 day OPINEL CHALLENGE March 2024
Mrs. Stitchy requested a No.8 for her gardening and stuff so I took the chance and included a No.8 with polished blade and Padouk handle into the order for m...
Multitool.Org Forum (multitool.ninja)
-
Day 11
It was office day for me for which I seem to prefer a Soddy Jr. with bone handles. Nice and slim carry in the 5th pocket ;)

-
@McStitchy said:
Day 11It was office day for me for which I seem to prefer a Soddy Jr. with bone handles. Nice and slim carry in the 5th pocket ;)

That's a nice looking Soddie

-
Day 11
I love my Soddies, but the belly of the blade is not conducive to electrical work. At least not what I do the majority of the time.
However, this Case 11031 SH would work very well for electrical work


-
@NutSAK said:
The grind on them is slightly convexed and very thin behind the edge. Very slice-y with a proper edge on them.
Basically on the .08, a few passes on each side against a ceramic rod, then stripped 10x each side.
Slice through paper like butter and almost silent as a gentle breeze past over the leaves.Yes, I can see this being a good trout knife or
Flirting a bluegill.Even slicing a tomato for a sandwich!😀
The handle provides a nice hold for even my large paws. 👍
-
@McStitchy said:
Day 11It was office day for me for which I seem to prefer a Soddy Jr. with bone handles. Nice and slim carry in the 5th pocket ;)

That one's got some purty bone slabs!!
I love my Soddies, but the belly of the blade is not conducive to electrical work. At least not what I do the majority of the time.
However, this Case 11031 SH would work very well for electrical work


Outstanding. The swedge, long blade pull and walnut (?) on that one are just awesome. Great pic!!
-
Sorry for being silent over the last 2 days - I am in my busiest time of the year... annual reviews :ahhh :ahhh
Todays pic is one of my largest Case knives. Case calls it a 6.5 BoneStag Trapper, but a lot of sellers call it a Wharncliffe Trapper, and it's a hefty beast


Love some wharnie Trapper.
-
Day 11
So another two knife day because reasons.
At work.
Backpocket action.

On the way home.
Some England style Wharnie stag action.

-
@HarleyXJGuy said:
Day 11So another two knife day because reasons.
At work.
Backpocket action.

On the way home.
Some England style Wharnie stag action.

Oh, you needed to trim the hooves on the lamb, I mean RAM!
-
-
@LoopCutter said:
Oh, you needed to trim the hooves on the lamb, I mean RAM!I see what you did there.
-
Appreciate all the info about Congresses and whittling. Slightly embarrassed that I didn't figure it out on my own, since I taught wood carving at my first job. But that's what we're all here for, right?
Day 11
No uses, so here's today's bandana. You all remember your sheet bend, right?

-
Day 11
The Soddie Jr had a busy day today.Cut open a cantaloupe with no problem

Then it split some twigs and firestarter for making popcorn on the twig stove

-
@Sos24 - My apologies☺️
I started searching Sod Busters and I found a bunch of different shades of green without JD logos or engravings.
Some very lovely ones too, including the same as yours.
Now I will admit, green is not a color I normally am drawn to! Yet on a Sod Buster I just may have to take a jump toward one.
Thank you for pointing out my lacking color spectrum among my SB jrs in BONE👍🌹
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

