*** The Dean 51 Traditional Challenge 2023 ***
-
@NutSAK said:
The best ones I have are from the 70's, and the 2002-2010 timeframe, but I don't have much in-between. The most recent ones with problems I mentioned were from 2014 and 2021.I somewhat disagree with your QC comment as it applies here as I've not had this issue with other manufacturers, and a significant percentage of Cases that I've purchased required some adjustment. It is very clear when you compare the older ones side-by-side with the same patterns from current times that the same level of care is not being taken in the fit and finish department, and QC is clearly lacking or the standards have slipped. I can go into detail with supporting photos if need be.
Before these 4 I just purchased, I have 13 purchased through out 2013-2021. To be brutally honest, most majority would have some issues with sharpening and rubbing issues (which I can somewhat tolerate due to the design), but luckily no issue so serve that I have to immediately return.
I have heard of those better years as mentioned by NutSak; however, since I have never get to experience them, I wouldn't know what to compare to.
Another major brand that often gives me heartache is Buck, which most 110/112 would have some sharpening issues. Some even have spring protruding from chassis (either when the blade is out or retracted).
What I can never understand is the Buck 301 stockman pattern, one of the blade tips has always been proud from the chassis(from all the reviews online and my own too) and even after all these years, they still haven't fixed it. Having said that, if they could fix that and make the spring stiffer (at least a 5 pull like SAK), I would have buy one again in a heartbeat, the rosewood scale surely is pretty to my eyes.
-
Day 13
Some old bone today
I*XL Lamb and a Keen Kutter Cattle knife both from I believe ca. 1930's

-
Day 13
Package opening again today, and this time it was the package I was expecting from Dan. :ahhhWe traded for the orange scaled 4137 and then, just for fun, Dan threw in the Camillus Yello-Jaket trapper and four 58mm saks. A true gentleman that one. He happens to be next in line behind me to receive the Sos Surprise box, and has agreed to wait for that to get his trade items so I don't have to pay for shipping twice. I have curated some special items to add to the box that I know he will like. If anyone else wants to sign up for the surprise box there's a thread in the Breakroom about it. The way it works is you get the box, pick out some stuff and add stuff if you want and then send it to the next person. It's fun because you don't know what is going to be in the box.



-
Day 13
Notebook time.

-
@AlanK - very interesting assortment you received along with the Orange Sod Buster.
That Yello-Jaket is neat. Camillus did those nice.
-
Day 13:
Sharpened a pencil for the kid


-
@Sos24 said:
It actually came with the stove for storage (stove fits in it when folded) and as ash pan.I know the smaller size is sold separately on the Firebox website. The size in my picture (Freestyle case) isn’t listed separately on their website, but if the x-case is too small and you contacted them they might sell you one.
Cool! Thanks

-
@comis said:
What I can never understand is the Buck 301 stockman pattern, one of the blade tips has always been proud from the chassis(from all the reviews online and my own too) and even after all these years, they still haven't fixed it. Having said that, if they could fix that and make the spring stiffer (at least a 5 pull like SAK), I would have buy one again in a heartbeat, the rosewood scale surely is pretty to my eyes.This is one area that has changed for Case. They never adjust the kicks on the blades anymore like they used to. They just assemble them as they're punched out and polished and don't adjust the blade height out of the frame at all. This was one of the many issues with my 2014 Sowbelly--the tip of the sheepsfoot blade was proud of the chassis, so I adjusted the kick with a diamond file to my desired height. Of course, that in turn will make the backspring not quite even with the liners on that end, but that's much less of an issue than the proud blade.
-
@LoopCutter said:
A 6347 in Antique Bone from 2013 arrived this afternoon late. It appears to have been carried, pocket worn, yet blades seldom if ever used.[attach id=0 msg=2427995]
[attach id=1 msg=2427995]
A real beauty there LC.

-
-
Day 13
Having carried all of my Case knives at least once already, I didn't feel the compulsion to change this morning (possible that I also just forgot
) So, Small Texas Jack again. Could be worse. ;)
-
I love watching it too LC! I'm hoping to get into touring rides here later this year, but on the leisure side of things
I'd love to be at that level! That lower one is the second of two knives offered for 2021, and is a No. 8 stainless. Neither one is available through Opinel anymore. I only have the two shown, as I was too late on ordering the '22 model. As near as I can tell, there's no '23 model yet, and I've checked both here in the States and in France. If one comes out I'm jumping on the order train. For a collector on a budget, they're great! It helps, too, that Mrs R is an Opinel fan :D.@LoopCutter said:
@Barry - luv the TdF theme! But do tell me about the lower model! Please!!!Is it still available?
I love watching the event, now more for the scenery of the country side. I have ridden several century rides, not Metric and US mile types back as late as 15 years ago.Now enjoy from my couch☺️
-
-
Day 13
Axe Lamb

-
The Dean51 Traditional Challenge ( Case Badge )
Day 13 of 30
Case Sodbuster Jr.Today I paired the Sodbuster with the Leatherman Rev. Got to use them both.
Well,,, it wasn't the $10 capacitor,,,, it was the $266 motor. Took me a couple of days to dig in and verify though,,, simply because I didn't want to spend $266 without "knowing for sure". So this afternoon I disassembled everything and got a good look at the motor's internals,,, yep,,,, she's blown. The motor is now ordered and will be here in a couple of days. It's hard for me to pay anybody to do anything. If I do pay'em, you can bet I'm watching so I don't have to pay them twice. All said and done I figure I saved myself a full weeks pay ( or more ) by doing it myself.
.jpg)
-
-
Day 13
Gotta love when ebay sellers give you a whole nesting doll of packaging. 47 opened up (what I think is) a civvi Camilus demo knife.

-
'76 Canoe

Beautiful!!
Some old bone today
I*XL Lamb and a Keen Kutter Cattle knife both from I believe ca. 1930's
Oh yeah,,, that Keen Kutter is right up my alley,,, great looking knife!
@LoopCutter said:
Day 13A Crimsom Red type of day.
Wanted to show two new knives that were ordered and arrived mid June with this challenge in mind.
[attach id=0 msg=2428129]
[attach id=1 msg=2428129]My first 75, a big’im!
Nice!! Those remind me of the strawberry scales found on some of the old Robeson knives.
-
Awesome trads and pics...and parcels and all today again guys

-
Day 13
Case busting the Jr. Sod since 1970


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login