*** The Dean 51 Traditional Challenge 2023 ***
-
@NutSAK said:
The best ones I have are from the 70's, and the 2002-2010 timeframe, but I don't have much in-between. The most recent ones with problems I mentioned were from 2014 and 2021. Both of those were pretty terrible. I fixed the issues with the 2014, but there's nothing I can do with the 2021 to improve it.I somewhat disagree with your QC comment as it applies here as I've not had this issue with other manufacturers, and a significant percentage of Cases that I've purchased required some adjustment. It is very clear when you compare the older ones side-by-side with the same patterns from current times that the same level of care is not being taken in the fit and finish department, and QC is clearly lacking or the standards have slipped. I can go into detail with supporting photos if need be.
No need; of course I take you at your word that you have some bad ones. And I have also gotten some bad ones myself.
I did forget to mention one of my go-to moves in my previous post. When I order folding knives from stocking dealers, I generally put something in the comments along the lines of “Check F&F and W&T before shipping.” Not as good as handling it yourself before buying, but I’ve had good success with this approach.

-
1973 Case pattern #14 Slim Jack in Delrin
This pattern is normally seen with no shield as this one is and was discontinued in the mid-70s.
I think this would have been the perfect boy's knife with the small/medium size, spear point main blade, half stops and no-frills design. I've pictured it with a Case mini trapper and Queen dogleg jack for size reference.


That's a really nice boy's knife pattern, it'd be nice if they could bring it back someday,
-
@LoopCutter said:
Day 14A Blue kind of day, bright blue sky and SOS24 using her Blue Sod inspired me to follow suit.
Caribbean Blue as well, and a Copperhead and a Sod Buster…
[attach id=0 msg=2428370]
This blue is pretty addictive...must resist...
-
Day14

A full re-sharpening session today for many new Case knives just arrived or previously owned. Luckily the steels felt similar to Vic steel, so it took only 1-2 hours for all the blades I need to resharpen.
-
Carried the 6137 I just received from Dan:

Nice one, Adam!! 😍
@HarleyXJGuy said:
Don’t hate the Black Synthetic or the Medium Jack pattern.Oh, yeah, I definitely liked it enough to buy it... I just have too many knives to carry. The "not exciting" comment was just that all of you are posting very colorful handles.
@Poncho65 said:
Well, you guys broke me down
I was trying to stay away from the edged tool sub forum but I wanted to check on this Challenge
to many great looking blades in here
So I caved 
I received this lovely Sod Jr yesterday and carried it today :D


Congratz Poncho! Very nice!!

-

Very nice knife too

@MTSAK said:
Day 13:
CV Mini Trapper today. Used it to cut off some tag ends while fishing with buddy boy.Great pics! He looks very proud of his catch

Apologies for brevity of this post, but I'm late (phone picked a bad time to dip down to 15%). The 3137 was used to cut open a packet of mashed potato mix.
I need a yellow or off-white Sod Buster like that. Nice pics

-

A full re-sharpening session today for many new Case knives just arrived or previously owned. Luckily the steels felt similar to Vic steel, so it took only 1-2 hours for all the blades I need to resharpen.
This looks like my workbench right now! I can't stand carrying a dull knife.
I see that I'm not the only one who thinks Spyderco slipped up by putting the angle designations on the Sharpmaker UNDER the rod storage.
Oh well, it's a great design otherwise. -
@nate j said:
I did forget to mention one of my go-to moves in my previous post. When I order folding knives from stocking dealers, I generally put something in the comments along the lines of “Check F&F and W&T before shipping.” Not as good as handling it yourself before buying, but I’ve had good success with this approach.
That's a great idea Nate. It certainly can't hurt!

-
@Barry Rowland said:
Day 14: Some kitchen use with the mighty No. 12!!I bought an Opinel and I wasn't too fond of it... maybe I need to buy beat like that

Day 14 :D and, if you hadn't guessed, I've gone with my Case "Working" medium Jack. As with my newer Medium Stockman I really don't care for the "as-ground" finish on the blades, so I've given these a little bit of a rub down with wet-and-dry to get to a more satin finish.
Ooooo, I need to buy one of those... Oh wait!
Great pic and cool knife 
1973 Case pattern #14 Slim Jack in Delrin
This pattern is normally seen with no shield as this one is and was discontinued in the mid-70s.
I think this would have been the perfect boy's knife with the small/medium size, spear point main blade, half stops and no-frills design. I've pictured it with a Case mini trapper and Queen dogleg jack for size reference.


That one on the right... 😍
-
@LoopCutter said:
Day 14A Blue kind of day, bright blue sky and SOS24 using her Blue Sod inspired me to follow suit.
Caribbean Blue as well, and a Copperhead and a Sod Buster…
[attach id=0 msg=2428370]
LOVE that blue Copperhead!! 😍
-
Day 13
Typical day of cigars and fingernails.
The spotting that is appearing on the carbon steel blades is clearly visible here…

-
Day14
Small Lamb and a Bunny Knife

-
@Barry Rowland said:
Day 14: Some kitchen use with the mighty No. 12!!A baguette killer :ahhh
-
Day 14 :D and, if you hadn't guessed, I've gone with my Case "Working" medium Jack. As with my newer Medium Stockman I really don't care for the "as-ground" finish on the blades, so I've given these a little bit of a rub down with wet-and-dry to get to a more satin finish.
That's sleek

-
-
-
Day 14
Thank god it's Friday!
Case Barlow on a late walk...
-
-
Day 14:
Filling the role as moral support when giving one of my own creations a new edge


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
