Leatherman Garage
-
Thank you for the detailed large bit driver info. It seems a lot better on my Wave+.
I don’t really get how Leatherman has a tool tool like the can opener/wire cutter and then they don’t always use it. Seems a step backwards and it seems that on every tool they choose to include something people want but also something people don’t. It’s almost like they don’t want to make one perfect tool to get people to buy more than one hmm.
My wish for the Arc is same as #5 but…
- t-shank adaptor x2 where the file and saw are.
- can opener with the wire stripper.
-
Getting a decent sheath is going to be a challenge. #5 is a lot like the Charge, minus the diamond body width of the blades.
#5 is :
Length: 1098.36 mm long
Width: 35.67 mm at the widest (blade), 31.85 mm at pliers end, 32.48 mm at opening end
Thicks: 21 mm thickness at latches, 17.16 mm in middle, 23.55 mm across the belt loop.Personally I like clipping the belt loop over the sheath, before closing the flap. That trick saved me a few times. Have read others put the belt clip down into the sheath first to have the sheath form over the belt clip.
Since #5 is roughly $100 more than the Arc, why not have it as a user? The higher price is probably due to being made in the USA. - - Hopefully the Arc will have more of the refinements that Leatherman uses. This whole P series I did not care for and this is the first version of those that I bought. Not overly keen on the fidget deployers. Running the thumb or finger over the latches is just
weird. 
-
American Bench Made on Amazon claims to have 18 different types of sheaths for Leatherman, so sent them generalized measurements for #5. Leather gives and breaks in, so the 'extra' parts was not measured, more of the main tool only. Do not want a lot of wobble going on ya know. 🥴
Length: 4.25 inches long
Width: 0.68" inches thick
Thickness: 1.24 inches thickThis ought to get the word out to everyone on the internet, right? 🤠 🤙🏻
-
@Cynan said:
Hadn’t noticed the lack of wire stripper. Have to say I still use the plier method all the time - didn’t realise it was taboo !I do it the same way, even when the tool has that V-shaped wire stripper on the can/bottle opener. Still, even though I don't use them, I appreciate how Leatherman consolidates the can opener, the bottle opener, and the wire stripper on many of their tools for those who do. It would have been nice for them to do the same on the Garage 5 (and presumably on the Arc), but I don't care either way.
-
File me under those who still use the swiss can opener. I use mine on my Spirit and Super Tinker quite often.
-
I don’t use a can opener, yet I do use the bottle opener. Is the combined can/bottle opener that much worse than the can opener? A dedicated bottle opener does seem to work better than the combined can/bottle opener, but if they want both in a tool then I’d rather the combined one personally so the extra space can be used for something else… and who knows I may use the can opener one day. So yeah can the same be said of the can opener?
-
I’m on the fence about the T - shank blade holder.
The saw and file that came with my Surge fit nicely, but blades from a Bosch multipack have a lot of unwanted movement.
Maybe something like the Parts knife (I’ve never handled or used one) with a selection of knife and saw blades?
It would probably be more expensive than buying off-brand blades, but having a wood saw, a metal saw, a serrated blade with gut hook, a file, all available would be good.
-
@Outback in Idaho said:
Really, there is only one thing missing on this tool... the Blade Exchanger! Seriously. This essentially a Charge sized Mini-Surge, but without the blade exchanger. Leatherman is oh so close to breaking new territory here. The tool could go wider, or skip that eyeglass bit thing, slider stuff over, put the blade exhanger in place of the file. And ya know someone's going to mod one of these or the Arc and do just that.Mine arrived today, probably literally the last of these delivered in the lower 48. Overall, very pleased to have won the lottery and have this one here. The thumbstud on the super-smooth Magnacut (!) blade is a great addition - the whole blade is a great addition, though I'd skip the Cerakote. The other trip is the spring-loaded pliers. I'm actually not a big fan of spring-loaded pliers, but I will admit to having opened the #5 a few times just to see those pliers in action. :D
The user-serviceable pivot is neat. That showed up on the Darkside and the explanation was that they had to be able to coat the pliers heads before assembly, so they needed a joint that could be assembled after coating. I'm pretty sure Leatherman either couldn't or wouldn't offer spring-loaded pliers if the joint wasn't serviceable. Even if you could assemble them before peening the rivet you certainly couldn't service them when inevitable users return them with broker springs for warranty service - and I'm sure these springs will break, some percentage of all small wire springs break.
I was going to say that if I were in charge of tool selection, I'd probably dump either the can opener and awl or the large slotted screwdriver in favor of the Philips #2 driver on the P4 and P2, although I'm not certain about that. The P2 driver is basically the same as a Leatherman flat bit so arguably you wouldn't gain anything. Maybe the flat driver is worth keeping as a scraper/very light duty prybar?
I don't use the can opener much. I get a lot of use from the SAK bottle opener and would prefer a tool/blade like that to the can opener but obviously YMMV.
Wanted to mention in response to the quoted text above that someone has designed what looks like a very good blade exchanger for the P series tools. He has a YT video on the part, which can be ordered from Shapeways. If you have any trouble finding it, let me know. I have no affiliation at all with him or Shapeways.
-
Congrats jnewell, and welcome to

-
Congrats
but definitely not last
mine is showing to be here Wednesday
:ahhh -
@jnewell said:
Mine arrived today, probably literally the last of these delivered in the lower 48.Mine just arrived at my door 15 minutes ago

I'm still playing with it, but so far I love it... well, everything except the flat-tip awl
All of the tools operate very smoothly, especially the blade. I saw a complaint online about the handles being too tight, but as long as you don't expect a balisong-like operation on the pliers, they are perfect. I hope the Arc is very similar. -
Found a much older basic black sheath I think was for a Wave. The snap still has a bite, and fits the #5 quite well, although is tight. The rivets used are not brass, but a silvery tubular rivet that flares out across the leather. Would be concerned of wearing down the ceramic coating though, exposed metal rivets.

Do not have much on hand. Those Original Charge sheaths went through the freaking roof on eBay. People think they are worth $100+?!?! Not paying $100 for a sheath with elastic sides, maybe garment leather, but NOT elastic.
Seen this seller on Ebay with some sheaths. Sent him this:
Here are the photos to the Leatherman Garage #5.
Want enough leather for the pocket clip to clip over the edge. Pocket clip is 2.0 inches long, 0.14 inches inner space.
Closed tool is 1.24 inches wide without blade top. With blade it is 1.40 inches, but it should be able to create a pocket inside the sheath over time.Closed tool is 4.25 inches long, 0.68 inches thick, 1.24 inches wide.
Think you have something or cane make a quality sheath? If so, may have more business for you from those of us on Multitool.Org.
Also would prefer a double snap flap with aggressive-bite snaps for extra security.
Does fit in this older case, but it is very tight.
--> With Four extra photos




-
New message from: hiddinleather (1,527RED_STAR Star)
Hello, thanks for reaching out! Looks like something we can put together for you no problem. However, my brother is the one who takes care of this and he is gone on a family trip for next couple days. Once he gets back, he will work out the details with you. Thank you again!, AbeCoolies!

Spoiler:
Their URL is: https://www.ebay.com/str/fidelityworks -
I like the scales of the Garage 5 and the jaws of Mr Crunch.
Slightly underwhelmed by the Europe75.
It definitely seems like the Free series is the future for Leatherman if the Garage releases and the Arc are anything to go by.
[attach id=0 msg=2429442]

-
Congrats on the Garage 5!

-
Can’t quite decide if it annoys me that Mr Crunch and #005 have the letting stamped on opposite sides or I prefer them this way as it’s more symmetrical :D
Works quite well with two.. but if you had more hmm.
Love Mr Crunch. Wish I had one. Glad I don’t.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
