Knipex Owners Club
-
@Tasky said:
I'd been debating a pair of the 125s for some time, as I kept finding situations where the Vic SAK pliers just weren't big enough, although most PBMTs would likely have also struggled.
I decided to test the water with the more pocket-friendly 100mm version:[attach id=0 msg=2429263]
Nice one Tasky, I am having a hard time deciding whether to get a 125mm or 100mm. Keep us posted

-
-
@Tasky said:
I'd been debating a pair of the 125s for some time, as I kept finding situations where the Vic SAK pliers just weren't big enough, although most PBMTs would likely have also struggled.
I decided to test the water with the more pocket-friendly 100mm version:[attach id=0 msg=2429263]
Congrats, let us know how you're getting on with it

I've just used one for the gif above in my reply to m47mu74nt :D -
@Tasky said:
I'd been debating a pair of the 125s for some time, as I kept finding situations where the Vic SAK pliers just weren't big enough, although most PBMTs would likely have also struggled.
I decided to test the water with the more pocket-friendly 100mm version:[attach id=0 msg=2429263]
You will most likely find that the 100mm is extremely capable and sufficient for your uses... and end up getting the 125 anyway (and then the 180, the 250...)
-
@nakken said:
Nice one Tasky, I am having a hard time deciding whether to get a 125mm or 100mm. Keep us posted
I have both sizes (it's the MTO way, right ?) but I find the 100mm is just too small to use comfortably, so prefer the 125s. I have large hands, but my missus prefers the 100 so she now has custody (she has smaller hands).
-

Cobra XS. -
@gregozedobe said:
I have both sizes (it's the MTO way, right ?) but I find the 100mm is just too small to use comfortably, so prefer the 125s. I have large hands, but my missus prefers the 100 so she now has custody (she has smaller hands).That is what I have heard too. I have fairly large hands, plus the 125 is cheaper. Thanks!

@powernoodle said:

Cobra XS.See, now I can't decide again. The XS sure looks good, great picture powernoodle

I guess the MTO way is the only way

-
@ComboTool said:
You will most likely find that the 100mm is extremely capable and sufficient for your uses... and end up getting the 125 anyway (and then the 180, the 250...)I do have a XS, a 150, a 180 and a 250 ... BUT I never went for a 125

-

This works so well !! it would have saved my previous monitor from scratches :ahhh
-
@m47mu74nt said:
This works so well !! it would have saved my previous monitor from scratches :ahhh:D
-
*
Deciding which one to pocket carry can be difficult. The Pliers Wrench is grippier on fasteners and doesn't chew them up, but the Cobra is a better all-around grabber. Dang it! -
That's a tricky one! :D
-
It’s so sweeet

-
And useful,
It gets to work a lot when I am splicing ropes to extract the needle while stitching
-
@nakken said:
Nice one Tasky, I am having a hard time deciding whether to get a 125mm or 100mm. Keep us posted
Well..... they suck, if I'm brutally honest.
So often I've found the need for pliers over the past 8 months and these have fit the role very nicely, but with the one INFURIATING factor of being one-way!!!
The amount of times I've juuuuuuuust managed to fit the jaws to task, only to find they simply slip on the work and I have no room to fit them on the other way has had me livid. I know they're meant specifically for plumbing and have the smooth edge to facilitate a sort of ratcheting action, but that just halves the number of situations in which they can be used.I'll still carry them, but only until I find something better that lets me push and pull however I require.
-
Tiny spaces are the worst indeed. Sometimes I wonder what people were thinking when then designed certain stuff. Hydraulic manifolds have driven me beyond crazy more than once. One was made so tight that only the end ones could be removed. Thus to remove one in the center you had to remove all the ones above just to get tooling attached. Evil madness! (And that was even specially bought narrow tooling).
Then there was this old car where I tried to change some component deep down in the engine. The bolts were stuck on the engine side, and the component had holes. However after removing the nuts I realized that the component didn't have space to slide off the bolts. The entire engine would have to be taken out to make enough space...

But I've found lots of uses for the plier wrenches, so while not suited for all things they are great at what they do - if you need that :)
-
I've accumulated a few over the last 10 years!
I don't EDC any of them though...A few more are tucked into drawers and other toolkits...

The stubby needle nose combo pliers 0822145 are by far my most used general purpose pliers. They are pretty much the same size as the pliers on a LM Surge.
[attach id=0 msg=2478388]
The 6 inch pliers wrench is also a go-to around the house.

-
Yes, it is weird how often that one seems just right. Goldilocks factor for many small tasks.
-
@Brock O Lee said:
I've accumulated a few over the last 10 years!
I don't EDC any of them though...A few more are tucked into drawers and other toolkits...

The stubby needle nose combo pliers 0822145 are by far my most used general purpose pliers. They are pretty much the same size as the pliers on a LM Surge.
The 6 inch pliers wrench is also a go-to around the house.
The stubby needle nose combo pliers is my favourite too. So much so that I bought an extra one to put in my Chainsaw tool roll (it's good for installing those pesky e-clips). Unfortunately the pivot was slightly stiff, even after lubing and much opening and closing. It's not too bad, but it's the first Knipex that wasn't perfect straight out of the box (and I have a couple of dozen others).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

