*** The Dean 51 Traditional Challenge 2023 ***
-
Day 22
Looking at the 63087 Ocean Blue Bone medium stockman and the 06999 Dark Red Bone Standard Jig medium stockman and wondering why they are both called a medium stockman when the Red Bone is clearly almost 1/2 inch longer than the blue bone.

-
@Rich_SD said:
Thank you
About half of my Case knives are stag or BoneStag - it's my favorite handle material.Stag is cool, love em too!
KA-BAR-LO and a Lamb
Love that Ka-bar-lo!
@NutSAK said:
You make a good point about the geometry, but to stock and sharpening angle, you would want to add the grind of the stock to the equation. The Case is slightly hollow ground and the GEC is flat ground, so that must also be considered in the slice-ability of the two blades.It does definitely boil down to usage, and it's great that we have so many choices.

I think that pinpoint the reason why I enjoy the Case large stockman so much, full clip with hollow grind.

-
@Alan K. said:
Day 22
Looking at the 63087 Ocean Blue Bone medium stockman and the 06999 Dark Red Bone Standard Jig medium stockman and wondering why they are both called a medium stockman when the Red Bone is clearly almost 1/2 inch longer than the blue bone.Sometimes I wonder they do that because of lineage, so these two may come from different line of stockman, and the sizing is in reference to the larger or smaller size within the same line, but not to each other?
-
@Alan K. said:
Day 22
Looking at the 63087 Ocean Blue Bone medium stockman and the 06999 Dark Red Bone Standard Jig medium stockman and wondering why they are both called a medium stockman when the Red Bone is clearly almost 1/2 inch longer than the blue bone.The smallest was called “Small Stockman”. The largest was called “Large Stockman”. Everything in between was called “Medium Stockman”.
Although, I have seen the 3 7/8” closed size simply called “Stockman”, but that still leaves several different patterns and sizes collectively under the term “Medium Stockman”.
-
@McStitchy said:
Interesting look on that Colonial !I've never figured out what the Colonial's covers are made out of. It definitely doesn't have a premium feel. But if Colonial were anything like Imperial, your money went where it counted: into the steel.
@Barry Rowland said:
Day 22.
@LoopCutter said:
My trusty Sod Buster cutting vegetation on the homestead and another tool handling the woodsy branches as need.Teamwork!

@McStitchy said:
Carried my new addition today

@HarleyXJGuy said:
Getting rid of some yellow goodness are we?The 3137 is staying, but I have a 3318 CV that will soon be looking for a new home.
Another great day, y'awl!

Day 22
It was a no-use day.
[attach id=0 msg=2430299]

-
Day 22
Decided to carry the Sowbelly today

-
@McStitchy said:
Day 22Carried my new addition today

A Forge de Laguiole 1211INEB with ebony scales and stainless steel liners/bolsters with satin finish.
It is 11cm/4.33in closed with a 9.5cm/3.74in blade, and I can just about carry it comfortably enough in my jeans 5th pocket. Its form and shape seems to carry slimmer than the numbers would suggest.

Here it is lying next to a Buck 110...

I had it out for a walk this afternoon. It was a rainy day at Irelands west coast...


Nice Lag Matt. I need one that size. I think the one I've used the most in the past is a 9cm. Cool pic of you rainy west coast.

-
@HarleyXJGuy said:
Day 22So this will be a day in the life of a Slimline Trapper while on the road.
First of course we check the truck. Fluids, tires and the like.
New pair of gloves needs a string cut.

Trimming off some marking tape on an air line that was starting to unravel.

Waiting on the Excavator so we could dump a load of contaminated soil.

Sometimes a little bit will get stuck in the box. Have to sort it out with the trusty shovel.


Job complete.
Enjoying the Lords drink afterwards.

All in all a good days work for Mr. Trapper.
Great post mate. That Slimline Trapper seems to be pulling it's weight.

-
Day 23.
A fantastic Gentleman's pocket knife (so what am I doing with it?
). The TB Tear Drop is slim, light and just very pleasing to the eye.
-
@Alan K. said:
Day 22
Looking at the 63087 Ocean Blue Bone medium stockman and the 06999 Dark Red Bone Standard Jig medium stockman and wondering why they are both called a medium stockman when the Red Bone is clearly almost 1/2 inch longer than the blue bone.I'm not familiar with a #99 Stockman pattern. Is the red one not a 6318?
@nate j said:
The smallest was called “Small Stockman”. The largest was called “Large Stockman”. Everything in between was called “Medium Stockman”.That's exactly it, I believe. I have heard/seen the #87 called a Junior Stockman as well, but not by Case.
-
-
@HarleyXJGuy said:
Day 22So this will be a day in the life of a Slimline Trapper while on the road.
First of course we check the truck. Fluids, tires and the like.
New pair of gloves needs a string cut.

Trimming off some marking tape on an air line that was starting to unravel.

Waiting on the Excavator so we could dump a load of contaminated soil.

Sometimes a little bit will get stuck in the box. Have to sort it out with the trusty shovel.


Job complete.
Enjoying the Lords drink afterwards.

All in all a good days work for Mr. Trapper.
And the sun was shining

Thanks for sharing your day with us. -
@Farmer X said:
I've never figured out what the Colonial's covers are made out of. It definitely doesn't have a premium feel. But if Colonial were anything like Imperial, your money went where it counted: into the steel....

...
Another great day, y'awl!

Day 22
It was a no-use day.
[attach id=0 msg=2430299]

Colonial/Imperial = good steel ...check!
That's a bomb proof minimal carry there

-
@David said:
Nice Lag Matt. I need one that size. I think the one I've used the most in the past is a 9cm. Cool pic of you rainy west coast.
Thanks David

I was surprised at how solid they are. Nothing flimsy or delicate other than the fine blade tip maybe.
The bulid quality on both of my Forge de Laguiole is excellent, apart from the grind on my new 11cm one.
It was very uneven, wavy on one side, blunt tip and stopped 5mm short to the tang.
I assume they simply forgot to finish the grind and edge on this one. There doesn' seem to be any material missing after I have corrected it.
I actually had fun doing that and I love it :D -
-
**Day 23
**

I am thinking to put a few Case knives together for a display case as a series, and am thinking maybe Amber bone maybe a good choice, since it seems to have many patterns available.
-
Day 23
A Trapper in Amber bone floats above a beautiful view…
[attach id=0 msg=2430373]

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I love the lines of that one, and it certainly is a gentleman's knife. The bone on that one shows great color too.