Gareth's Sword Collection.
-
Almost a full year since I bought a new sword. I think I've been very well behaved and I deserved a reward. The fact a dealer chum of mine had a flash sale has nothing to do with it at all.

What we have here is yet another sword from the 1796 British regulations. However, it's not another Infantry sword, no, this one is for a Heavy Cavalry Officer...while on foot. A "Dress" sword or, as some would call it a "dismounted" sword (which is a better descriptor IMO). The actual Heavy Cavalry Officers sword (for mounted service) is a much larger and more cumbersome so this type was intended to be more convenient for when you don't have a horse between your thighs.
Most of the scabbards you find with these are leather with gilt fittings, however you also see these with steel scabbards that suggests that they were carried by some on active campaign.
The hilt is pretty typical for the type and in collector circles is known as a "boat" hilt, but the blade is less standard. The hugely pronounced centre rib makes this extremely stiff for the thrust. I suspect it only hampers the cut though. Still sharp enough for a good slash mind you. More usually this had a pretty robust, double edged blade with a small fuller near the hilt end only. very handy 600g (1lb 5oz) and a 805mm (31 1/2") blade.




-
Another good sword Gareth!
I sure enjoy your sword collection! 
-
Cheers David.

-
-
A while since I bought anything (I'm being good) and it isn't even a sword. :D I can't even begin to claim any knowledge on the subject, but I know the dealer and I trust that he knows what he is talking about.
So what I have is a Jambiya. I'm told it's most likely from the Ottoman Empire and dates to the early part of the 19th Century. The variety of what makes a Jambiya is mind boggling, from hilt to the blade and the scabbard, yet all follow the basic profile. This is a very workaday knife and, while there is a lot of cultural identity wrapped up in the Jambiya, this is a very practical fighting knife. Scarily so.
The blade is a modest 7 1/2" (190mm) yet has a nice heft in the hand.


-
Cool !

-
Good example Gareth. The Jambiya has a lot of culture and tradition wrapped up in it. Yes its a formidable weapon. :D
-
Good grief, I forgot one.
So, it might not have been quite such a long time since I bought anything. 
What I have here is a sabre that is part of the illustrious 1796 Light Cavalry family...but first a bit of history. The British army had brought out a standard pattern of light cavalry sabre in 1788, but it wasn't universally loved. A compromise design of slightly curved/somewhat straight, relatively slim and with quite a long blade it excelled at nothing in particular. It should be noted though that, like some of the other "patterns" of swords, the 1788 was a design that had been around from quite some time before the Army decided that all light cavalry should be using the same sabre. The 1788 saw some use in the Flanders campaign and there a certain Major John Gaspard le Marchant (British 6th Inniskilling Dragoons) decided that he could definitely come up with something better.
What Le Marchant came up with, in collaboration with sword-maker Osborne, was this design. Shorter, much more heavily curved, wider and excelling at slashing. It seems to have been accepted very readily by the troops who were issued it and it is one of the most iconic designs of the Peninsula War.
There is still quite a lot of variation in the exact sabre. Officers buying their own got a large amount of personal leeway, but even the trooper's sabres varying depending on maker, year and batch. It also ended up in the hands of the Prussians (British allies) and was adopted as their 1811 pattern with some tweaks. This Prussian adoption would influence German sabre design for the next 100 years, long after it had been superseded in Britain.
So, with all the variation out there, I'm on safe ground to say that this particular sabre is absolutely part of the 1796 LC family, but I can't be sure exactly who or when it was issued as it lacks any unit markings.


-
Great looking sabre !

-
Well, it's time to update this topic with another new addition to the Gareth Bladed Arsenal.

What we have here is another so-called "hunting sword". As stated before in this topic, this is a somewhat misleading name as it implies that these were of limited usage. In truth, while these were indeed the sword to wear while hunting, they were also worn at many other times. As one researcher once put it; smallswords were very much the sword to wear while in the City and polite company, these were the sword to be worn when in the Country and on Campaign. Hence I prefer the period terms such as Cuttoe, Hanger or even Falchion (harping back to curved swords of an earlier period).
So this one in particular dates from the early years of the 1700s. In style it's either Austrian or thereabouts, or perhaps French who were aping that look at the time. It may have had a knuckle chain at some point in it's early life. Sadly it's missing one of the lozenges from the bone grip. These are not repeated on the back side of the grip that would have been worn nearest the body. A fairly economical sword to be fair, better versions would be in silver rather than brass.
I can't deny that I do like the fact this is a sword from the Golden age of Piracy. :D Note this 1724 woodcut of the infamous Blackbeard. It's an extremely handy 1lb (460g) with a 22" (560mm) blade. It's balanced very well for a fast slashing stroke.




-
Cool Sword !

-
Splendid collection, Gareth. Nice pictures and a great read about the history of each piece. Thanks for sharing 
-
Cheers gents.

-
Catching up. That last one really caught me eye. What is the handle material of the Jambiya? I did a quick search of it and there is quite a history and cultural identity to that one. Very neat for sure.
-
@Aloha said:
Catching up. That last one really caught me eye. What is the handle material of the Jambiya? I did a quick search of it and there is quite a history and cultural identity to that one. Very neat for sure.It's horn of some kind. Given it's pretty low status I don't imagine it's anything at all exotic. :)
-
Well, there's another sword in the house. :D A second 1796 Heavy Cavalry Dress Sword, this time with a blade that is far more typical of the type. As noted a few posts ago these were the swords intended for Heavy Cavalry Officers to wear while dismounted. This might give the impression that they were purely ceremonial but in truth these are very practical weapons (though not necessarily for mounted combat). Nothing but the best for the British Heavy Cavalry during the Napoleonic period. In fact they are slightly heavier and stiffer than the average 1796 Infantry Officer's Sword. As some examples are known to be associated with steel scabbards, rather than leather, it is at least suspected that they were taken on campaign.
The blade is straight, double edged, and has a short fuller. This one is fairly typical at 31 1/2" (800mm) has a POB 4 3/4" (120mm) and a weight of 1lb 11oz (760g).




-
Thats a beauty.
-
Really nice!
Sent from my iPhone using Tapatalk
-
It's new sword time. :D I'll admit, I do seem to have a type. Broadly this could easily just be described as another late 18th Century Spadroon and you wouldn't be wrong. Where this differs from others in my collection is in the detail.
Firstly the grip and the hilt. It's a "backstrap" grip that is common enough in sabres (the norm in fact) but is less common in straight bladed swords of the time though hardly unique. Unlike the more typical pommel, grip and quillon of most spadroons of the age I find this to be that bit more comfortable in the hand and lends itself to a cutting action very well. The grip itself is Ivory. The guard is utterly plain and functional. Made of really heavy gauge brass this gives a good, sturdy feel to the whole thing that speaks to the owner wanting a fighting sword, not a piece of hip jewellery.
The blade is double edged (again, I do have a type). Unlike some of my other double-edged spadroons, which are designed to prioritise the thrust, this one is stout and capable in both the thrust and the cut. It's also a little shorter than the norm at just 30". Again, very plain and functional.
A friend pointed out that my sword has a twin out there somewhere. So similar that I took a moment to decided they weren't the exact same sword. The listing pointed out the "Francis Thurkle" makers mark and has it down as a Naval Officer's sword. That's certainly plausible and I'd be more than willing to say it's right, but without the "fouled anchor" often found on Naval swords I don't think I can say for sure. The British Navy wouldn't have a standard pattern of sword until 1805. The sword of Captain Philip Broke mentioned in the listing is...similar, but has quite a different blade from the one being shown (and mine). Still a nice bit of additional information.
BRITISH NAVAL OFFICER'S SWORD BY FRANCIS THURKLE CA.1795-1800
This Francis Thurkle-made British Napoleonic naval officer's fighting sword dates ca.1795-1800 and is mounted with a 30" long double-edged blade, which is peppered with pitting though out, as a result of salt water penetration. Similarly pitted pistols barrels and cutlass blades are a sure sign of being stored in humid
Sailor in Saddle (sailor-in-saddle.myshopify.com)




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
