Show off your Sak mod's!
-
Spartan tools used for my latest build in a vintage style.
0,5mm brass liners, 2mm nickel silver bolsters and smoked Oak burl. Nickel silver pins in front and back, brass in the center. Acid washed tools that are steel wool polished


-
@pa_strunk said:
Got the itch to do a two blade SAK mod and need some help naming it. Any thoughts?Since a Jack-knife have two blades in the front, why not "Jack of all trades" ?
-
Very nice
it really doesn’t even look sak, unless you know the tools! Again NICE!
JR -
@MadPlumbarian said:
Very nice
it really doesn’t even look sak, unless you know the tools! Again NICE!
JRThank you kindly JR. My aim was to make it look like the knives from late1800 to early 1900
-
@BarbaBaba, That is a beautiful knife.

It reminds me of a Camillus knife I had when I was kid that I loved.

-
@BarbaBaba said:
Thank you kindly JR. My aim was to make it look like the knives from late1800 to early 1900Well I’d say you hit the nail on the head, cause at a quick glance I’d say it looks like a vintage 3blade, it almost even looks like a canoe, it just doesn’t have the curve up at the ends, but other then that like I said if you didn’t know your sak tools someone would totally guess it’s something else and say it’s a vintage pocket knife!

JR -
@variable said:
@BarbaBaba, That is a beautiful knife.
It reminds me of a Camillus knife I had when I was kid that I loved.

Thank you kindly! I am also a lover of those old knives from the past century.
-
Wow, that turned out beautiful in so many ways. You completely captured the vintage look like it would have come from the factory in the late 1800s.
-
@BarbaBaba said:
Spartan tools used for my latest build in a vintage style.
0,5mm brass liners, 2mm nickel silver bolsters and smoked Oak burl. Nickel silver pins in front and back, brass in the center. Acid washed tools that are steel wool polishedQuite an awesome job.
-
I have to agree to awl of the above! Great work and it look fantastic
-
Made another odd ball last night. This one I decided to try after watching Cody (fit to survive, f2s customs) make a few on his YouTube channel. It’s a “Roadinox” with 2 & 1/8” Bohler N690 blade (cheap on eBay used), new package opener, large bottle opener off of a beat up 93 mm alox, grooved corkscrew, and hook with nail file. The short blade also leaves some space and with a few magnets you can even make it into a rock solid Leatherman bit driver. Anyway, Frankensteins come in all shapes and sizes.



-
I really like the Spydy blade. It's eye-catching!
And a bit driver is always a plus!
BTW...Frankenstein was the mad scientist who created the monster. So, you are Frankenstein

-
Not sure what to call this one but it's the first mod I've done in a few years and I'm happy with the tool to width ratio. Also it's the first EDC I've had in a long time without a lanyard. We'll see......

-
-
@pa_strunk said:
Made another odd ball last night. This one I decided to try after watching Cody (fit to survive, f2s customs) make a few on his YouTube channel. It’s a “Roadinox” with 2 & 1/8” Bohler N690 blade (cheap on eBay used), new package opener, large bottle opener off of a beat up 93 mm alox, grooved corkscrew, and hook with nail file. The short blade also leaves some space and with a few magnets you can even make it into a rock solid Leatherman bit driver. Anyway, Frankensteins come in all shapes and sizes.That looks great!! Interesting blade selection and excellent tool choices.

-
@magentus said:
Not sure what to call this one but it's the first mod I've done in a few years and I'm happy with the tool to width ratio. Also it's the first EDC I've had in a long time without a lanyard. We'll see......Very nice, the scale "Camping" is very fitting as all the tools are very useful for camping!

-
@DIAMOND said:
I like the tool selection. The inline awl is reminisce of the 1890. Nice!Thanks Diamond - the in-line awl is one of my fave SAK tools

@pfrsantos said:
Good to see you posting again, mags! Nice SAK, too!

Hey Santos, nice to hear from you - eyes off my sa(C)k buddy

-
Swapped a can opener for a pruner and added the SAK Spares pivots. The thing I didn't account for is that both the bottle opener and the pruner want to be "in-front" and bump into each other a little bit...
Any ideas on how to stop this happening? Was thinking of shimming one or the other (or both I guess) but kind of ran out of steam a little so will put this one in the "good enough" pile for now.

-
@Hzza said:
Swapped a can opener for a pruner and added the SAK Spares pivots. The thing I didn't account for is that both the bottle opener and the pruner want to be "in-front" and bump into each other a little bit...Any ideas on how to stop this happening? Was thinking of shimming one or the other (or both I guess) but kind of ran out of steam a little so will put this one in the "good enough" pile for now.
Love the pruning blade! Nice mod!
Yeah, the screw driver and the can opener in my Climber are each beveled allowing them to rest beside each other.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login