What Did You Use Your Multitool For Today?
-
Used my day old new Curl several times yesterday at the cabin. Cut down three maples with a chainsaw and trimmed the branches with an axe and the Curl's diamond file worked great for touching up the axe edge back to shaving sharp. Used also the pliers to pull a hot grill out of the electric fish smoker. Used the knife to cut some vegetables. Also used the scissors as I sewed the most minimal of the LM bit holder "envelopes" out a old car medikit fabric to carry in the jeans fifth pocket. Had so much to done so I forgot to take any pics but yeah, the Curl was a great companion yesterday!
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
I fully acknowledge that I could have used the little plastic fuse puller that GM provided me,,,, but where's the fun in that?

.jpg)
-
I was just taking a trip to our grocerie shop and our 4 year old godson was suddely there with his new bike and her mom. So they walked with me to our house and the boy was driving with the new bike all exited. I noticed that the front brake lever was pointing straight down and the bell was unusable from the position it was at. Not a single thing on the left side of the handlebar was going to be used by those short fingers. So I pulled out the Curl and bit set from my shorts and adjusted the lever and the bell so that he could use them. Made sure that the bolts were tight. Happy I had the Curl and bits with me so I could improve the safety of his riding
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
Nice usage PSG!

-
@Pilotsupergrip said:
I was just taking a trip to our grocerie shop and our 4 year old godson was suddely there with his new bike and her mom. So they walked with me to our house and the boy was driving with the new bike all exited. I noticed that the front brake lever was pointing straight down and the bell was unusable from the position it was at. Not a single thing on the left side of the handlebar was going to be used by those short fingers. So I pulled out the Curl and bit set from my shorts and adjusted the lever and the bell so that he could use them. Made sure that the bolts were tight. Happy I had the Curl and bits with me so I could improve the safety of his ridingLähetetty minun SM-A426B laitteesta Tapatalkilla
For me that's exactly why you should carry a MT! Nice work
-
I'm on vacation and flew on a plane so no mt's for me for two weeks. Mrs TJ got a chocolate milk and I used the sharp part of my Nightize Doohickey to take the wrapper off for recycling purposes.
-
Fixed a bathroom towel holder. The little screw on top was lose so I tightened it with my Leatherman Wingman. Used the small screwdriver.
-
Posted in Carry thread I overcarried today. I shot myself in the foot with that one. Ended up using LM Curl and Climber on desk disassembly and reassembly. x4 My Back hurts.
-
Installed a Tesla charger with my modified ST 300M, Leatherman ratchet, bit kit, and OC Farmer (not pictured):

-
I used my Free P4 to assemble a pedestal fan:

-
The SOG PowerPint came in handy for readjusting the Docter sight on my Artemis CP2

[attach id=0 msg=2434419]

-
The special Spirit was used today to, in order of importance, open a beer and dispose of a hot aluminium foil BBQ container after the pork filet was done


-
Yesterday took the air conditioner out as the weather is not that hot anymore. I had a plywood with a hole for the air duct replacing the outer window. There was some storm in the summer that made the plywood rattle and I feared it might fall to the street so I had jammed the plywood in place with two wooden posts that I nailed to the window frame. Had to take out the plywood with posts first. Used the Curl as a hammer to knock of the posts. Pliers to remove the nails. And used the Squirt to tighten few screws in a tight spot.


Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
Must be nice to shut the air-conditioner off in September...but don't y'awl get some rather long winters?
-
@Farmer X said:
Must be nice to shut the air-conditioner off in September...but don't y'awl get some rather long winters?We have a mobile air conditioner unit that we use during the warmer months primarily from may to september.
We do have long winters. Sun rises late and it gets dark early. In the most northern parts of Finland the sun does not rise at all in the middle of winter. Now it's getting a bit darker here in the south and the day seems to be shortening at a pace of 5-6 minutes a day. Good time to start carrying a flashlight again. :)
I just remembered that I took photos yesterday that works for this thread. Used the Squirt flathead to open up the scissors after the dishwasher and put some paraffin oil to the pivot area. Some rust had developed but got it off just by wiping with the oil. Also used the file as a scraper to remove some stuck dirt as I've ground the tip into a chisel. The tip was a bit rough from factory so it was an easy "mod". Had a photo of that too but nobody wants to see some stuck food being scraped off :D

Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@Pilotsupergrip said:
In the most northern parts of Finland the sun does not rise at all in the middle of winter.The northern parts of Alaska and Canada are the same way.
What Squirt do you have? They're great little tools!

-
@Farmer X said:
The northern parts of Alaska and Canada are the same way.What Squirt do you have? They're great little tools!

It a PS4. Great for small tasks. I like the toolset and the sturdy feel. I think I bought it during a summer holiday trip from a jewelry store we visited. Changed the batteries to a watch I think. And I saw the Squirt there on a display somewhat underpriced. Didn't buy it at once when I saw it but had to go back to the store to buy it after few hours. Lucky I did! Got my brand new Micra in a same way from a flea market few years later :D
The Squirt seems to get a little more pocket time than my Micra. Both are great tools though, just for different purposes. People don't get amazed when you pull one out from your pockets in an office so that's a bonus.
Got an action pic of Squirt from yesterday also. Had a charger that had a loose led light that I had to glue back to place and the charging pins were bent slightly. The philips head works well even with the small electronics screws. At least if they are not sunk deep.

Lähetetty minun SM-A426B laitteesta Tapatalkilla
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
