What tool did you carry today?
-
Very cool mod, custom 8)

-
I don't recall seeing scales with the Victorinox rivets/scale mounts exposed. I can see where the scales are countersunk a little, but the scales must be very thin. Someone on here had 3D printed some? Was that you?
I spent part of the day yesterday staring at a Spartan. And some pretty nice wood. Spartan. Wood. Spartan. Wood? I finally put the wood away so I could stop thinking about it. For now.
Anyway. Nice looking Spartan custom. Clever saw adapter usage. Best wishes. Gary

-
Thanks guys, and yeah IMR you guessed right that the scales are 3D printed and quite thin. This Spartan happens to be my very 1st 91mm SAK. At the time I often needed a USB memory stick so I designed a slot for one held in by the cork screw.
I thought I'd show also my minimalist sideways inner tube MP400 sheath :D

-
I'm glad you showed both sides. Nice clear photos, too. The scales look like they could be a press fit instead of a glue on. I will have to glue on the wood scales for my Spartan.
Minimalist side fitting inner tube Mr. Pinchy sheath. The photo was as good as a blueprint. Much more car seat and safety belt friendly. Easier to access too. Keep up the good thinking. Oh and please tell Variable about the t-shank adapter before he goes Cocoa Puffs.
Best wishes. Gary -
@variable said:
Now that is neat!

Where can one get that t-shank adapter or is it one of your designs?

Oh sorry, I missed this post somehow! It is one of my designs in prototype phase right now. I have a few versions I'm testing. The Skeletool one otherwise works great as well without needing any spacers forthin blades but it doesn't lock well enough yet if the saw gets jammed. This otherversion of the SAK one is a bitwider but also accommodates LM flat bits.
@IMR I would love to see the wood scale if/when it is done! Yeah, all of the ones I 3D print are designed as snap-on fitting.


-
You better put a place mat down there Steve. I can see those scratches you are putting on that mahogany. Sugar Bear will scream when she sees it. Best wishes. Gary
-
Sugar Bear...

-
Today's tool was my aged Echo weed wacker. Thought about putting a Spartan in my pocket, but decided Trooper instead. Hard to break old habits. Wouldn't need it, but why not? Started slaying weeds around some old sheds. Noticed a big Chinese privet had sprung up. Just a sprout before, but 4 feet high now. Echo proof. Right pocket. Trooper. Saw. Rip it out. Cut out a sprig of oak and another privet. Went back to Echo City. That was my morning tool inventory. Take SAK along. Never know just when.... Best wishes. Gary
-
Carrying Curl these days. At home it stays clipped to my shorts pocket. When im wearing jeans like today, I carry it suspended in the front pocket using some small carabiners. It hangs upright and no part of the tool can be seen outside as the lower carabiner hangs a bit inside the pocket. Used the diamond file today to sharpen 2 kitchen knives and scissors while we were visiting family

Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
Nice photo of Leatherman. So, you use one carabiner on a belt loop, with another carabiner fastened to it? Good solid carry tool. Best wishes. Gary
-
@IMR4198 said:
You better put a place mat down there Steve. I can see those scratches you are putting on that mahogany. Sugar Bear will scream when she sees it. Best wishes. Gary
No worries, this is a stool I made for my dad years ago out of reclaimed Mahogany that I saved from a dumpster. It came pre scratched and reliced. ;)



-
Lovely work. The best part is you saved something with potential out of a dumpster and made something nice with it. It irks me to see good lumber thrown away. I picked up a nice usable scrap out of the can outside Walmart last week. I can always use a piece of wood for something. No good to anybody in the landfill. Best wishes. Gary
-
@IMR4198 said:
Nice photo of Leatherman. So, you use one carabiner on a belt loop, with another carabiner fastened to it? Good solid carry tool. Best wishes. GaryThanks! Yeah, there is one small double carabiner attached to the belt loop, quess it is a niteize carabiner. And after that comes a snap hook that I attach to the Curl's pocket clip. I use the closest belt loop from the jeans zipper because jeans pockets have more room that side. You know, if you put your hands in your pockets, there is always room for thumbs
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@IMR4198 said:
Lovely work. The best part is you saved something with potential out of a dumpster and made something nice with it. It irks me to see good lumber thrown away. I picked up a nice usable scrap out of the can outside Walmart last week. I can always use a piece of wood for something. No good to anybody in the landfill. Best wishes. Gary
-
@Pilotsupergrip said:
Thanks! Yeah, there is one small double carabiner attached to the belt loop, quess it is a niteize carabiner. And after that comes a snap hook that I attach to the Curl's pocket clip. I use the closest belt loop from the jeans zipper because jeans pockets have more room that side. You know, if you put your hands in your pockets, there is always room for thumbsLähetetty minun SM-A426B laitteesta Tapatalkilla
Sure is shiny, ever used it?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
