The Hacked Leatherman Owners Club.
-
That Phillips a stronger in use for the adapter
you have the possibility to bend the flat driver, so it is a good tradeoff 
-
Welcome to all our new friends !

-
Looking good buddy!!
-
Thanks Barry

-
Almost finished with my ideal daily tool, nothing extraordinary but I’m happy with the outcome. Removed Phillips driver and installed bit driver then upgraded pliers from a donor Rebar. I also plan on replacing the lanyard loop and odd spacer next to it when I decide on what type of file I’d like in its place.

I’ve always enjoyed the look of the Zytel tools and finally got around to modding this one into something that suits me. -
Looks great Bill and I agree with you on the zytel tools. I think a bit driver should be standard on multi tools these days given the variety of screw there are.
-
Nice bit of modding, Bill
I always loved the Zytel line as well
if you can get a diamond file from a PST II or Pulse then I would suggest that
if not, a Rebar file will go in just fine 
-
I.love the Rebar file. It's one of the few files I've actually used on a multi tool and it does a great job!
-
What a great thread, loads of ideas and ingenious solutions

This is a mod that hardly measures up on here but it's something that irked me aesthetically and from a packaging pov.
I wanted my curl to emulate the old skool self contained silhouette original wave type dealio. If you get me
The original wave blades pivot hole was widened with a carbide burr, the wee nipple on the tang ground flat and a slight rounding of a corner was required to clear the frame when opening. The frame and blade lock are magically already orientated to provide wobble free lock up.
I brought the hump over the blades opening hole down to bring the blade entirely within the frame and likewise the original curl file (bar the stop which must remain).My ocd is satisfied

Obviously this doesn't improve the tool but visually it shrinks it down in size remarkably, it's all in its confines now and it's imo how it should have come instead of spilling out of its frame
. Yes I'm probably on the spectrum but I'm happy 
-
That's sleek! Nicely done Ed

-
@McStitchy said:
That's sleek! Nicely done Ed
Thanks McStitchy :)
I wasn't going to post it up as its really just me scratching my own itch, but hey maybe others feel the same way about it too.
The wave blade fits great and the kick that's there just clears the edge from fowling the bottom of the well.
I can't attest to a fuller blade though as mine is old and has been sharpened a fair bit so is missing a little meat. In other knives that suffer blade rap I peen the kick proud to give a little lift the edge. That would work here. -
Scratching your own itch is basically what I call modding ;)
A user builds or modifies something more to their liking and/or something to meet their specific needs

Great idea making the Curl blade more closely resemble the OG blade profile

-
Cheers Poncho

For all the bad press the curl gets I like the slimmer size and weight which means I'm more likely going to pocket it. Having it more like my pst/og wave in shape makes that experience better. -
I have been wanting to make a "Half Charge" like Poncho and many others, but I haven't yet come across a Charge that I am willing to disassemble. Today while scavenging scissors from a Wingman, I decided to make a Half Wingman for fun. Now that I have, I have a question for all of you Half Charge owners. Do you just leave the spot that used to contain the pliers empty? It seems like a huge area to just leave open.
Here's my Half Wingman. It looks perfect from the side -

Viewed from the bottom , not so much


-
Great mod, Rich

Mine is filled in the Ti one with a glass breaker now
The G10 one doesn't have anything but I do have another one now
and it came from Adam after purchase of a few things
It has a can opener, a large flat driver and a spacer that lock up like a slip joint in the plier springs 
I don't feel as though it is wasted space though because it does allow for me to use the long flat bit from a MUT

You can add things to the half Wingman without having to drill the pivot out bigger though because both ends have the same size pivot
they may not be exactly straight when they click into place though ;) the pivot of a Wave or Charge has a bigger pivot and you have to enlarge the hole of individual tools though 
-
Thanks Poncho

I might try putting the other Wingman tools on that side and see how they work. Before I try that, I'm going to see if any of my work friends has a 3D printer... I have a crazy idea.
-
Hope they do and we can see what you come up with


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






