Show off your Sak mod's!
-
@pa_strunk said:
Made another odd ball last night. This one I decided to try after watching Cody (fit to survive, f2s customs) make a few on his YouTube channel. It’s a “Roadinox” with 2 & 1/8” Bohler N690 blade (cheap on eBay used), new package opener, large bottle opener off of a beat up 93 mm alox, grooved corkscrew, and hook with nail file. The short blade also leaves some space and with a few magnets you can even make it into a rock solid Leatherman bit driver. Anyway, Frankensteins come in all shapes and sizes.That looks great!! Interesting blade selection and excellent tool choices.

-
@magentus said:
Not sure what to call this one but it's the first mod I've done in a few years and I'm happy with the tool to width ratio. Also it's the first EDC I've had in a long time without a lanyard. We'll see......Very nice, the scale "Camping" is very fitting as all the tools are very useful for camping!

-
@DIAMOND said:
I like the tool selection. The inline awl is reminisce of the 1890. Nice!Thanks Diamond - the in-line awl is one of my fave SAK tools

@pfrsantos said:
Good to see you posting again, mags! Nice SAK, too!

Hey Santos, nice to hear from you - eyes off my sa(C)k buddy

-
Swapped a can opener for a pruner and added the SAK Spares pivots. The thing I didn't account for is that both the bottle opener and the pruner want to be "in-front" and bump into each other a little bit...
Any ideas on how to stop this happening? Was thinking of shimming one or the other (or both I guess) but kind of ran out of steam a little so will put this one in the "good enough" pile for now.

-
@Hzza said:
Swapped a can opener for a pruner and added the SAK Spares pivots. The thing I didn't account for is that both the bottle opener and the pruner want to be "in-front" and bump into each other a little bit...Any ideas on how to stop this happening? Was thinking of shimming one or the other (or both I guess) but kind of ran out of steam a little so will put this one in the "good enough" pile for now.
Love the pruning blade! Nice mod!
Yeah, the screw driver and the can opener in my Climber are each beveled allowing them to rest beside each other.
-
@magentus said:
Not sure what to call this one but it's the first mod I've done in a few years and I'm happy with the tool to width ratio. Also it's the first EDC I've had in a long time without a lanyard. We'll see......No openers or screwdrivers at awl, very brave! :o
Looks dead handy for anything that needs to be drilled, cut, sawed or snipped, I like it! Very focused. -
I’ve enjoyed much time assembling and disassembling many SAK parts trying to get to the ultimate edc (for me). While a couple have made it to the ‘this is definitely a model Vic should be making’ pile they are mostly 5 layers plus….ie a bit large for general urban edc. So being as the Ranger is one of my favourite Vic models I thought I’d try something around that and I think I could be on to something. 4 layers but thinner than a huntsman, full loaded set of back spring tools and plus scales makes for a pretty dense package.
Could have saved a layer by using a combo tool of course but I prefer the full openers layer and small blade more. Small blade and awl take care of many of the scissor jobs….
Kind of a 91mm locksmith! See what you think.



-
Nice functional build, and I like the black scales

-
I really like how dense you can get with some of these mods, nice work dude

-
@Hzza said:
Swapped a can opener for a pruner and added the SAK Spares pivots. The thing I didn't account for is that both the bottle opener and the pruner want to be "in-front" and bump into each other a little bit...Any ideas on how to stop this happening? Was thinking of shimming one or the other (or both I guess) but kind of ran out of steam a little so will put this one in the "good enough" pile for now.
You could get a pruner blade from a model where it kinks the other way like on the Pioneer Rancher.
Or use a vise and grips or a hammer and bend it over. I have done that before.
Only bend one way, bending it back can break it. -
@Hzza said:
I really like how dense you can get with some of these mods, nice work dude
@DIAMOND said:
Nice functional build, and I like the black scales
It is interesting to see how many functions you can get in as small a package as possible I think I remember getting around 18 or so in two layer before :0)
Haven’t used black scales often but decided on a nice new set of plus scales for this build and really like them.
-
@zoidberg said:
You could get a pruner blade from a model where it kinks the other way like on the Pioneer Rancher.
Or use a vise and grips or a hammer and bend it over. I have done that before.
Only bend one way, bending it back can break it.Hammered it in the end, worked a treat - just waiting on some washers now as I didn't realise there should be a spacer in there as well ::)
Always learning :D -
I replaced the blade in this project with an Elmax and made a new spring specifically for the new blade, yes this spring is not fully machined yet, but I needed to test a couple frictions.




-
Also a prototype 84mm spring has been made, maybe someone has already made a similar one, but would anyone be interested in such a spring?

-
:o
When I mod, I add a simple lanyard.

Nice work on the spring!

-
[attach id=0 msg=2437425]
My latest build.
[attach id=1 msg=2437425]
84mm Sportsman now as a 3 layer with saw from my first vic
0,5mm brass liners and 2mm brass bolsters. Scales are localy sourced spalted apple wood.
It´s a pretty slim 3 layer :)

-
@BarbaBaba said:
[attach id=0 msg=2437425]
My latest build.
[attach id=1 msg=2437425]
84mm Sportsman now as a 3 layer with saw from my first vic
0,5mm brass liners and 2mm brass bolsters. Scales are localy sourced spalted apple wood.
It´s a pretty slim 3 layer :)Lovely work, as usual!
Sent from my SAK using Tapatalk
-
@decustomforge said:
Also a prototype 84mm spring has been made, maybe someone has already made a similar one, but would anyone be interested in such a spring?If that's an 84mm scissor spring then I'm certainly interested! And I know there will be more...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login