italian knife makers (MKM/Viper/Fox/maserin/lionsteel/mercury...)
-
Right around $120 I believe. I got this one pre-owned on ebay for a bit less than that.
The Hug seems like a lot of knife for the price but it's bigger than I'd likely carry much in a pocket. That modified Wharncliffe looks like a great profile for daily carry.
-
-
-
-
-
-
@m47mu74nt said:
So the Cold Steel Lucky Two is Italian made?Indeed it is. It’s hard to read in my previous pic, but the PE blade is simply marked “LUCKY”, while the SE blade is marked “COLD STEEL CPM-S35VN ITALY”.
It’s an under-appreciated knife IMO. Only 1.2 ounces, about 3 1/4” closed, carbon fiber handle slabs, two CPM-S35VN blades (one PE and one SE) that are a bit over 2.5” long with about 2 1/4” sharp (roughly the size of a 91 mm SAK main blade), and available for $70.
The pocket clip is basic but functional, doesn’t interfere with getting a good grip on the knife, and if nothing else provides a useful indication of which blade is which, as the knife is otherwise completely symmetrical when closed.


-
That's a pretty cool little knife. Kind of a modern Muskrat.
-
-
-
-
Beautiful!I've been very close to pushing the button on a natural Micarta one with bolsters on both ends.
-
-
-
@nate j said:
Indeed it is. It’s hard to read in my previous pic, but the PE blade is simply marked “LUCKY”, while the SE blade is marked “COLD STEEL CPM-S35VN ITALY”.It’s an under-appreciated knife IMO. Only 1.2 ounces, about 3 1/4” closed, carbon fiber handle slabs, two CPM-S35VN blades (one PE and one SE) that are a bit over 2.5” long with about 2 1/4” sharp (roughly the size of a 91 mm SAK main blade), and available for $70.
The pocket clip is basic but functional, doesn’t interfere with getting a good grip on the knife, and if nothing else provides a useful indication of which blade is which, as the knife is otherwise completely symmetrical when closed.
Wow, that's a lot of knife for 70, nice buy!
@m47mu74nt said:
Because one wasn't enough (and the price was pretty low compared to MSRP), I got another Viper Hug, this time with red Fat carbon scales and only bolsters of the pivot side
I remembered eyeing this Viper for the longest time, in general, I do find myself quite attracted to Viper designs.
-
Here are my two profferings, which given that Mrs Surge is a full on Italian, is pretty poor

First an Antonini Rescue Knife* (purchased from a member) wearing a set of Ranger Beads (gifted by a member)

The second is my Fox Vulpis 5**
*- This is carried on my SAR kit if not using the Vic' RT*
*** This is a favourite of mine and would be my EDC if it wasn't for the current Vic Alox challenge*

- This is carried on my SAR kit if not using the Vic' RT*
-
@SurgeUk said:
Here are my two profferings, which given that Mrs Surge is a full on Italian, is pretty poor

First an Antonini Rescue Knife* (purchased from a member) wearing a set of Ranger Beads (gifted by a member)

The second is my Fox Vulpis 5**
*- This is carried on my SAR kit if not using the Vic' RT*
*** This is a favourite of mine and would be my EDC if it wasn't for the current Vic Alox challenge*
Nice! Very, very nice!
Lähetetty minun SM-T515 laitteesta Tapatalkilla
- This is carried on my SAR kit if not using the Vic' RT*
-
-
@SurgeUk said:
Here are my two profferings, which given that Mrs Surge is a full on Italian, is pretty poor

First an Antonini Rescue Knife* (purchased from a member) wearing a set of Ranger Beads (gifted by a member)

The second is my Fox Vulpis 5**
*- This is carried on my SAR kit if not using the Vic' RT*
*** This is a favourite of mine and would be my EDC if it wasn't for the current Vic Alox challenge*
I’m curious how you find the scissors and saw on that Vulpis.
I’m keen to pick one up. If the scissors and saw are up to basically Vic standards, it will probably be the largest model. If not, I’ll likely go with one of the slimmer options.
- This is carried on my SAR kit if not using the Vic' RT*
-
@nate j said:
I’m curious how you find the scissors and saw on that Vulpis.I’m keen to pick one up. If the scissors and saw are up to basically Vic standards, it will probably be the largest model. If not, I’ll likely go with one of the slimmer options.
I've done a quick test of the saw vs the Fx as I don't have a Vic' with a smaller saw (until someone builds me a Cadet Fx)
The Fx did better on this lightweight task, but only marginally; no doubt helped by it's extra length (I'll leave that there for PF ;))
The scissors; I've tested previously and they are at least as good as the Vic' ones but they are "really" pointy so if that's an issue you may wish to reconsider

I really like the ease of opening on the main blade (and it's shape) probably due to the cutout and the lack of the awl meaning you can gain purchase on the blade with thumb and forefinger.
I would prefer OHO (which is not an issue here) but I know that it is across Europe so, fair enough

The width is not a problem (again for PF ::)) but it feels bulkier due the lack of length (knock yourself out here PF)
Awl in awl; I like it (a lot) If they had been selling the Vulpis 4 (Px version) I'd have bought that as I really don't need a saw and the only time I've used it has been today, for this





Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


I've come pretty close to pulling the trigger on a Maserin fixed blade.