What tool did you carry today?
-
I'll get a pocket/neck lanyard dump tomorrow. -
Good stuff everyone. Customod your edc pouch seems like a solid kit to take on jobs! I wish I had enough stuff to use my gear on nowadays. When I had motorcycles I always carried a Maxpedition pouch toolkit that had 1/4" ratchet set, Knipex pliers etc. Actually I did a fighter build with that kit and it has been unchanged since then and now stays in my car trunk when I need a solid set of tools. Last time it was used to take apart a chainsaw for maintenance.
Todays carry is a bit different for me as I want to try different things. This one is a workbench user from a man I looked up my whole life and who passed away few years ago. Longest SAK I've used, it's 107mm closed and has a 75mm high carbon blade. Cuts big chunks from wood happily. It says GML on the blade.


Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@customod said:
Nice carries and photos guys.
I enjoy reading a bit more of the why and how to the carries that has been posted recently. Keep it up

Yesterday I had a Wingman (only modification being chamfered and slightly natrowed phillips to accommodate the bit adapter) and today I got out the original titanium Charge. Both days were supplemented by a climber with another one of my own scale designs.
The tweezers act as a spring to keep the pen against a notch so it won't pop back in while writing. Essentially it is like plus scales, but everything on one scale and the pen works a bit like a lever action instead of just being stored, all just about as thin as a regular scale.I'm working on a paracord handle for my broken Fiskars loppers into knife/pry/chisel project. I might need to search online to learn some better techniques. I didn't walk away unscathed, as I've already sharpened it to paper slicing level, despite the rough look. The finger choil was the latest addition before this.
I think Wingman can sometimes be a bit under appreciated. Spring loaded pliers, good scissors and great everyday carry ergos. Also the package opener is pretty useful. Had one for my first LM and when I eventually got OHT and Rebar I gave my Wingman to a friend. He still uses it every time fishing and at cabin which is every few weeks. As I think of it, spring loaded pliers are actually what every fisherman would appreciate when you dig a hook out of an angry pike's jaw :D
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@customod said:
Took my grab-n-go edc pouch yesterday (@Diamond I added a small clip to my Tank007 at some point and I keep it backwards so I can clip it to a hat bill like a head light).The ring there is attached to a pen and there's a small notebook in the back.
Love this pouch! And I like the idea of a reversed clip for hat use.

@Pilotsupergrip said:
Todays carry is a bit different for me as I want to try different things. This one is a workbench user from a man I looked up my whole life and who passed away few years ago.Those are special pieces to carry for sure.
And I agree with the Wingman. I had one and gave it to my son to motivate him to have a multitool on him at work and play. AND I love the package opener as well. My Gerber Dime introduced me to them and I've been hooked ever since.
-
You take great photos, Pilot. How about a photo of the tang stamp of that nice black knife? Is that possible? Any ideas about country of origin? Best wishes. Gary
-
A tradition blade. I just received this in the mail yesterday. And...I didn't have to sell my garment to obtain it.

-
@IMR4198 said:
You take great photos, Pilot. How about a photo of the tang stamp of that nice black knife? Is that possible? Any ideas about country of origin? Best wishes. GaryThanks Gary. Took two photos, one of the stamp and one with a ruler to show the size better. Haven't thought about it much but I just googled about the country of origin and found out these were manufactured in the 50's in East Germany. So this may be 70 years old now :O


Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@DIAMOND said:
A tradition blade. I just received this in the mail yesterday. And...I didn't have to sell my garment to obtain it.Sweet knife. How do you like the wider blade these have? I like the looks of this blade geometry, looks like a great cutter with a bit more beef to it than slimmer Vic blades. I tend to think the more width the blade has the more force I can use comfortably with it. Those D-rings are something that modern knives/SAKs should have also in some models, not only in traditional ones
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@Pilotsupergrip said:
Thanks Gary. Took two photos, one of the stamp and one with a ruler to show the size better. Haven't thought about it much but I just googled about the country of origin and found out these were manufactured in the 50's in East Germany. So this may be 70 years old now :O

Lähetetty minun SM-A426B laitteesta Tapatalkilla
Hi, pilotsupergrip. Nice knife.

Some words about the producer: GML stands for "Genossenschaft der Messerschmiede Leegebruch". (association of the knifesmiths of Leegebruch). Leegebruch is a small town in the county of Brandenburg in eastern germany. GML was one of the biggest producers of cutlery in the GDR, producing from 1946 till 1991, founded by some knifemaker refugees from then Chechoslovakia, former Nixdorf, then Mikulášovice, where the famous Mikov knives come from. GML knives were sold to the s o c i a l i s t brother countries from the warsaw pakt, but also to china and several western states, e.g. Finland.
If you're interested in some historical aspects, here's an article (in german): https://www.geschichtsverein-leegebruch.de/messerschmiede/
-
Great information about the East German firm. I figured someone would know. Thanks for sharing, Tinker. I have seen something about the Mikov knives. They look pretty good. The internet 'information' is that the GML knives were made by 'Rostfrei'. Absolutely laughable.
Carrying a Spartan today, but the only tool I used was the locking pliers in the photo. Jonnesway made in Taiwan, I think. They seem to be about as good as the US locking pliers. I know they saved my tail-feathers today. I saw these things lying in the road one day. Probably fell off a truck. They were almost new. I stopped and picked them up.
My Dad was along, and he grouched and yelled about me stopping to pick up the tool. Later I was using them on something, and he said, "I remember when you got those things. You stole them." I suppose leaving them in the road so they might damage somebody's car was better? Or ruin the pliers. Best wishes. Gary
[attach id=0 msg=2435567]
-
Cool story Gary! My SwissTool is also "stolen". Found it on rural road at the tail end of Sunday's long run some 20 odd years ago. Could not belief my luck!
Also great info on GML gents!
I think I've seen their cutlery in some public cafeterias but not sure.Lähetetty minun SM-T515 laitteesta Tapatalkilla
-
More awesome carries, all

-
@tinker gnome said:
Hi, pilotsupergrip. Nice knife.
Some words about the producer: GML stands for "Genossenschaft der Messerschmiede Leegebruch". (association of the knifesmiths of Leegebruch). Leegebruch is a small town in the county of Brandenburg in eastern germany. GML was one of the biggest producers of cutlery in the GDR, producing from 1946 till 1991, founded by some knifemaker refugees from then Chechoslovakia, former Nixdorf, then Mikulášovice, where the famous Mikov knives come from. GML knives were sold to the s o c i a l i s t brother countries from the warsaw pakt, but also to china and several western states, e.g. Finland.
If you're interested in some historical aspects, here's an article (in german): https://www.geschichtsverein-leegebruch.de/messerschmiede/
Thanks, nice to know some history behind this knife. It's was easy to tap "translate" on the phone browser as I don't know any german. :)
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@IMR4198 said:
Great information about the East German firm. I figured someone would know. Thanks for sharing, Tinker. I have seen something about the Mikov knives. They look pretty good. The internet 'information' is that the GML knives were made by 'Rostfrei'. Absolutely laughable.
Carrying a Spartan today, but the only tool I used was the locking pliers in the photo. Jonnesway made in Taiwan, I think. They seem to be about as good as the US locking pliers. I know they saved my tail-feathers today. I saw these things lying in the road one day. Probably fell off a truck. They were almost new. I stopped and picked them up.
My Dad was along, and he grouched and yelled about me stopping to pick up the tool. Later I was using them on something, and he said, "I remember when you got those things. You stole them." I suppose leaving them in the road so they might damage somebody's car was better? Or ruin the pliers. Best wishes. Gary
[attach id=0 msg=2435567]I think you gave these locking pliers just a new home. No tool should be left to rust :( These do come really handy when you need to apply greater force on a jammed nut. I carried Leatherman Crunch when I was in construction and I used it on many occasions. It was also great for working on motorcycles. Locking pliers rock.
Spartan also rocks. It's a great user/beater SAK as you can pick a new one up cheap from many stores if you happen to break one. I like to use a Spartan when DIYing something and I need a SAK that I can pry with, mix epoxy, drill holes and cut stuff with. Unlike my Huntsman that is mostly used in the woods for carving and food prepping and is kept always sharp and clean.
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@old Lefty said:
Cool story Gary! My SwissTool is also "stolen". Found it on rural road at the tail end of Sunday's long run some 20 odd years ago. Could not belief my luck!Also great info on GML gents!
I think I've seen their cutlery in some public cafeterias but not sure.Lähetetty minun SM-T515 laitteesta Tapatalkilla
Thats a real treasure you found!
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@IMR4198 said:
I suppose leaving them in the road so they might damage somebody's car was better? Or ruin the pliers.I used the same reasoning when I removed a pretty well-used old screwdriver from a busy intersection not too long ago.
Great carries for today, y'awl!
Here's mine:[attach id=0 msg=2435625]

-
Great stuff awl

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
