What tool did you carry today?
-
Dug the old Spartan from my car as I felt like I wanted to play with a SAK a bit. Earlier today I had the Curl with me on a small walk.
Used the Spartan already to tighten a few screws and it was on stanby as I checked a baby cart wheel for a flat. Luckily there was no hole. It was just a user error when inflating by a schrade valve in a tight spot as I managed to deflate it at the same time.
Had some camo scales earlier but I eventually swapped them to my (bushcraft) Huntsman. Not my favourite scales on this right now. Playing with the idea of making scales some day

Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
I like the blue with the Finnish griffon myself. I started in to make some wood scales for a Spartan two weeks ago. Got out the wood and tools. Heated up the knife in hot water to loosen the scales. Tried to pry them off. No go. Someone had already tinkered with the knife before me. I could see that. I could have broken them off but decided to not mess with them anymore. For now, anyway. They are superglued on, I think. Maybe epoxy. The scales look good now as they are. Best wishes. Gary
-
@IMR4198 said:
I like the blue with the Finnish griffon myself. I started in to make some wood scales for a Spartan two weeks ago. Got out the wood and tools. Heated up the knife in hot water to loosen the scales. Tried to pry them off. No go. Someone had already tinkered with the knife before me. I could see that. I could have broken them off but decided to not mess with them anymore. For now, anyway. They are superglued on, I think. Maybe epoxy. The scales look good now as they are. Best wishes. GaryQuess the epoxy is a good solution to attach the scales but it may be also a permanent :D What wood you used by the way?
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
I have used epoxy on SAK scales before. Just a dab on the posts will hold very well. I did that with a Climber a month ago or so. Turned out nice and sturdy too.
With wood I don't know any other way than to glue them on. A press fit would be hard to make, and likely would loosen as the wood expands and contracts with humidity, etc. I had some pretty mahogany lying around. A little soft, but I thought why not? I also have some rosewood. Really hard to saw. I thought about using some really fine plywood to make a set of scales and then paint them with fluorescent yellow. Maybe this winter when summer chores are finished.
There are some adhesives that would be less permanent than epoxy. Might be a better way. If you lived in the US, I would trade you something for the see through blue. Best wishes. Gary -
This morning my MT got used a bit differently. I found myself in a downhill bike accident on asphalt. I did get damaged some but this old wave and sheath on my belt probably saved my hip from some road rash. Looks like the asphalt shined up the button some as well as roughing up the edges of the leather more than it already was.

-
@customod said:
This morning my MT got used a bit differently. I found myself in a downhill bike accident on asphalt. I did get damaged some but this old wave and sheath on my belt probably saved my hip from some road rash. Looks like the asphalt shined up the button some as well as roughing up the edges of the leather more than it already was.Glad you are alright.
A badge of honor. One to be proud of.
-
@customod said:
This morning my MT got used a bit differently. I found myself in a downhill bike accident on asphalt. I did get damaged some but this old wave and sheath on my belt probably saved my hip from some road rash. Looks like the asphalt shined up the button some as well as roughing up the edges of the leather more than it already was.Hope you are ok. Bike accidents can be nasty.
Two years ago I did the same thing on a trail as I fell over the handlebars on a rock. Rebar on belt sheath and the leather got some damage but has been in use still to this day. Haven't really thought about it but it might have saved my hip skin also. Almost broke my wrist and got a frozen shoulder for 1,5 years after that.
Remember folks to always wear a helmet and a MT on a belt sheath when doing extreme activities!
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
Yeah, my rib is bruised and I snapped my clavicle in half and some roadrash. Luckily no nerve damage and most of all I'm thankful I didn't have a kid riding on the back at the time!
anyways, I'm not working on much and I'm wearing clothes that are as easy as possible to get on and off with one arm in use. I've fallen back to my ultra light EDC wallet setup which is still very capable. At is widest it is only 15mm thick as well.
The Gerber curve holds some daily use keys. and that red thing is a small but strong magnifying glass and holds toothpick/tweezers combo and some wire.

-
Snapped clavicle, seriously painful :ahhh
Hope you heals quickly customod that sounds very nasty -
:ahhh Get well soon and I hope for a speedy recovery

-
Customod, hope you heal up quickly. And nice carries from awl!

-
@customod said:
Yeah, my rib is bruised and I snapped my clavicle in half and some roadrash. Luckily no nerve damage and most of all I'm thankful I didn't have a kid riding on the back at the time!
anyways, I'm not working on much and I'm wearing clothes that are as easy as possible to get on and off with one arm in use. I've fallen back to my ultra light EDC wallet setup which is still very capable. At is widest it is only 15mm thick as well.
The Gerber curve holds some daily use keys. and that red thing is a small but strong magnifying glass and holds toothpick/tweezers combo and some wire.Ahh hope you a fast recovery. Seems pretty painful.
I like your wallet/toolkit setup, may have to try out a setup like yours! I always have some plasters too nearby. Have been carrying at least one on the back of my phone bumper cover for several years as I've found out that it's easier that way than to search one from any pocket with a bleeding finger. Less mess. I recommend "extra strong construction plasters". Have to check out the package what it says.
Btw haha that Classic SD driver adapter. Played with that myself too. Not sure still if it can handle anything over size 1 philips :D
Todays carry is a bit mixed. Have thought about having a SAK at home and LM outside and Im testing how I like different options. So Im playing with the two I've got: Spartan and Huntsman. Have a small Skinth on my home shorts hip that has a flashlight, pen and room for a SAK.

Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
Sweet looking red combo Echotech. Wish they manufactured Juices still. Im thinking if Leatherman is having some plans for this size tools as their lineup seems to be missing that. And the market does not have that many options either. SOG Powerpint and Gerber Clutch come in mind.
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@Pilotsupergrip said:
Sweet looking red combo Echotech. Wish they manufactured Juices still. Im thinking if Leatherman is having some plans for this size tools as their lineup seems to be missing that. And the market does not have that many options either. SOG Powerpint and Gerber Clutch come in mind.Lähetetty minun SM-A426B laitteesta Tapatalkilla
Thanks Pilot

I’m a huge fan of the Juice line, had a CS4 (my favourite of them all) for about 20 years now. I prefer the older incarnation to the newer but both are good
I’ve been contemplating a Powerpint, people seem to like them apart from the scissors but haven’t pulled the pin on one yet…we’ll see

-
A lot of nice and interesting carry setups.

-
@customod said:
Yeah, my rib is bruised and I snapped my clavicle in half and some roadrash. Luckily no nerve damage and most of all I'm thankful I didn't have a kid riding on the back at the time!
anyways, I'm not working on much and I'm wearing clothes that are as easy as possible to get on and off with one arm in use. I've fallen back to my ultra light EDC wallet setup which is still very capable. At is widest it is only 15mm thick as well.
The Gerber curve holds some daily use keys. and that red thing is a small but strong magnifying glass and holds toothpick/tweezers combo and some wire.Interesting setup, very compact and custom tailored, it is always nice to see your setups.

I wish you a quick recovery from your injuries.
-
@customod said:
This morning my MT got used a bit differently. I found myself in a downhill bike accident on asphalt. I did get damaged some but this old wave and sheath on my belt probably saved my hip from some road rash. Looks like the asphalt shined up the button some as well as roughing up the edges of the leather more than it already was.Best wishes for a swift recovery !
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
