August Alox Addict Challenge 2023
-
Day 30
At work late with the soldat lifting my spirits 😁

-
Just got a couple of nice wins on eBay at a very good price, smooth green alox

Particularly pleased with the cadet II
Pics from the seller


-
Powernoodle Day 29
*
Selection of Olight Batons for the 4:30am dog walk. This morning - purple!* -
Excellent green alox scores, Echotech!
Great work, y’awl!Day 30
Hard to believe it’s here already! Today’s choice is an OC Technician, sadly reduced to humble post opening - some new boot brushes. Amazed to get 2 postal deliveries in 2 days - service here has been reduced to once a week if we’re lucky!

-
DAY 30!
Made it!Posting a pic of some of the knives I used this month. By far the most used was the Pioneer X. Biggest discovery of the challenge: I HAVE NO BLUE ALOX! :ahhh
CONGRATS TO ALL ALOX CHALLENGERS!

-
Day 30

To close out my challenge I am carrying my Old Cross Electrician
[attach id=0 msg=2437586]
My first Alox, and as this challenge did not plan to add any new items, I failed, two new Blue Alox, an electrician and a Pioneer arrived fresh from Switzerland mid month.
I am now happy, for now😉

-
Day 30! This was fun! Thanks for hosting a great Challenge Explorer! As always, thanks to all the participants for a great 30 days too!

-
Day 30
Thanks, Explorer for hosting! Quite a fun challenge. Can’t wait to see the badge.
I learned a bit about what I like in the Alox models and picked up a couple in the process.
Starting this month I had a MC, Solo, Pioneer, PX, and Electrician. The electrician was my preferred model for work and I kept my MC on my work keys and Solo with my work pouch and food safe. I hadn’t used the Pioneer or PX much at all.
I think we can all agree the awl is one of the best tools in each Alox model with it. Many of you also prefer the FX, which I don’t have, but I do like the scissors and saw offered on the 93mm models. I’ve also seen some appreciation posts about the Alox cap lifter. It is a beast and the Alox scales really give it the extra reinforcement to serve as a real pry bar or to drive a stubborn screw.
The Electrician blade is in my opinion a great tool. I do wish there was a smaller dedicated wire stripper like on the Spirit chisel combo tool. But, the Alox Electrician blade is capable even helping with smaller gauge wires, which I also used a bit during the swisschamp challenge. Lots of unique uses for it too during this challenge.
I’ve also found the pruner blade to be a quite capable tool, and having the Harvester and Pruner out in the garden and yard were helpful. These 2 plus the E without keyring are very comfortable to hold. Same goes for the Solo.
The Alox scales make this MC more comfortable than the cellidor models. The one thing about the Alox MC I don’t like is the keyring position against the Philips combo took back spring, which makes it difficult to use with a clip.
I have a new appreciation for the Pioneer. It came along with the PX for a great deal and I thought I’d never use it. Two layers is comfortable, and I used the can opener as a Philips driver much more than I thought. It will be going in my pocket more frequently moving forward. I’m still not sure about the PX. I think it’s something about the weight and when I’ve been carrying in gym shorts or other light weight pants. I’ll have to give it some more dedicated time.
If I were to rate my preferred models, I’d have to give the Electrician first place, the Harvester and MC tied for second, pioneer and Pruner at 3, then PX. The Solo I don’t feel I can rank as it serves a single purpose for me.
[attach id=0 msg=2437610]
Also, here’s the pouch setup for storage.
[attach id=1 msg=2437610]
This last day I’m going to give the PX some time.
[attach id=2 msg=2437610]
Also, noticed the PX has a silver middle pin (top). None of the other models do. Wonder if everyone else’s does?
[attach id=3 msg=2437610]
Cheers, awl
don’t go buying anymore Alox models for a while 




-
BADGE UPDATE
a BIG THANK YOU to comis for designing this amazing badge for the AAA Challenge!! :ahhh
(Big Badge)
(Small Badge)I’ve been working with the mods to get this awlesome badge up and ready to claim. Stay tuned and I’ll be sure to keep you updated on when it is available for those who have completed this challenge

-
@powernoodle said:
That is prolly the wise thing - which means that I will stay at here the Powernoodle Compound when it happens and hunker down. They will block off the surrounding streets, and I don't want to get kept away from home for a couple of days. They can't make me leave. "I know my rights!"Powernoodle Day 28

When Mrs. Powernoodle is away, I do naughty, naughty things like eat frozen pizza.Most memorable adventure usually happens, when naughtiness is involved. >:D :D

@Humayd A R Mahomedy said:
yeah,Max will always be Gibson.
before the live-action X-men movies,based on his Martin Riggs in Lethal Weapon 1,i though Gibson would have been perfect as Logan/Wolverine.i was an avid comic reader then and thought that he had the look,build and height [not as short as Logan,but close enough],and would have pulled off Logan's berserker rage.Absolutely, there is no Martin Riggs without Gibson!
And now that you mentioned it, he probably will make a great wolverine too!

-
A fun challenge to watch. One day left!
-
@LoopCutter said:
Day 30
To close out my challenge I am carrying my Old Cross Electrician
[attach id=0 msg=2437586]
My first Alox, and as this challenge did not plan to add any new items, I failed, two new Blue Alox, an electrician and a Pioneer arrived fresh from Switzerland mid month.
I am now happy, for now😉
Given all these great aloxes we have seen, I think you are doing pretty well here. :D
@Grand_Banana said:
Day 30Thanks, Explorer for hosting! Quite a fun challenge. Can’t wait to see the badge.
I learned a bit about what I like in the Alox models and picked up a couple in the process.
Starting this month I had a MC, Solo, Pioneer, PX, and Electrician. The electrician was my preferred model for work and I kept my MC on my work keys and Solo with my work pouch and food safe. I hadn’t used the Pioneer or PX much at all.
I think we can all agree the awl is one of the best tools in each Alox model with it. Many of you also prefer the FX, which I don’t have, but I do like the scissors and saw offered on the 93mm models. I’ve also seen some appreciation posts about the Alox cap lifter. It is a beast and the Alox scales really give it the extra reinforcement to serve as a real pry bar or to drive a stubborn screw.
The Electrician blade is in my opinion a great tool. I do wish there was a smaller dedicated wire stripper like on the Spirit chisel combo tool. But, the Alox Electrician blade is capable even helping with smaller gauge wires, which I also used a bit during the swisschamp challenge. Lots of unique uses for it too during this challenge.
I’ve also found the pruner blade to be a quite capable tool, and having the Harvester and Pruner out in the garden and yard were helpful. These 2 plus the E without keyring are very comfortable to hold. Same goes for the Solo.
The Alox scales make this MC more comfortable than the cellidor models. The one thing about the Alox MC I don’t like is the keyring position against the Philips combo took back spring, which makes it difficult to use with a clip.
I have a new appreciation for the Pioneer. It came along with the PX for a great deal and I thought I’d never use it. Two layers is comfortable, and I used the can opener as a Philips driver much more than I thought. It will be going in my pocket more frequently moving forward. I’m still not sure about the PX. I think it’s something about the weight and when I’ve been carrying in gym shorts or other light weight pants. I’ll have to give it some more dedicated time.
If I were to rate my preferred models, I’d have to give the Electrician first place, the Harvester and MC tied for second, pioneer and Pruner at 3, then PX. The Solo I don’t feel I can rank as it serves a single purpose for me.
[attach id=0 msg=2437610]
Also, here’s the pouch setup for storage.
[attach id=1 msg=2437610]
This last day I’m going to give the PX some time.
[attach id=2 msg=2437610]
Also, noticed the PX has a silver middle pin (top). None of the other models do. Wonder if everyone else’s does?
[attach id=3 msg=2437610]
Cheers, awl
don’t go buying anymore Alox models for a while 
Great writeup, I probably would rank PX higher since my addiction to Vic scissors, but this really captures what challenges are all about--to understand our tools and needs better.

-
a BIG THANK YOU to comis for designing this amazing badge for the AAA Challenge!! :ahhh
(Big Badge)
(Small Badge)I’ve been working with the mods to get this awlesome badge up and ready to claim. Stay tuned and I’ll be sure to keep you updated on when it is available for those who have completed this challenge

Thank you for the chance for allowing me to get involved with the design process, you have provided the core idea of the badges and I just work off from that.
Great challenge! -
Day 30

Getting ready for the grand finale...I have long wanted to capture as many colors as possible from my alox collecting, but today's been packed with long meetings and I barely have the time to try to draw out as many color as I could from the pile. Hopefully I would arrange the shot in a more artistic way in daylight(Day 31), to create a rainbow shot I could remembered this challenge by.
A big thank you to Explorer for hosting this wonderful challenge, and all of you whom have contributed in this challenge.

It is rare to see so many Alox patterns and colors all in one thread, let alone the chance to get to know our members better via the daily posting. If there is a color to this challenge, I'd say this is Golden!

-
Day 30
Thanks to everyone for making this such an enjoyable challenge! I'm going to continue for a couple of more days because I think I missed posting a pic for two days in the middle somewhere.
Today, a pic of my three most carried and used in the challenge. Two Victorinox and a Wenger:

-

Getting ready for the grand finale...I have long wanted to capture as many colors as possible from my alox collecting, but today's been packed with long meetings and I barely have the time to try to draw out as many color as I could from the pile. Hopefully I would arrange the shot in a more artistic way in daylight(Day 31), to create a rainbow shot I could remembered this challenge by.
A big thank you to Explorer for hosting this wognderful challenge, and all of you whom have contributed in this challenge.

re all in one thread, let alone the chance to get to know our members better via the daily posting. If there is a color to this challenge, I'd say this is Golden!

that's a great lineup Comis
Day 30
Soldat opened a bag of catfood
20230830_163522 by Humayd a r Mahomedy, on Flickrthe fearsome foursome :D i definitely plan on getting more,and colours too :D
20230830_173020 by Humayd a r Mahomedy, on Flickr
20230830_172954 by Humayd a r Mahomedy, on Flickrthanks Explorer for hosting this challenge.
-
Thanks to everyone for making this such an enjoyable challenge! I'm going to continue for a couple of more days because I think I missed posting a pic for two days in the middle somewhere.
Today, a pic of my three most carried and used in the challenge. Two Victorinox and a Wenger:

cool pic man
-
Thanks to Explorer for hosting, and great badge design, Comis - love that range of alox colour and I can’t wait to see the full daylight photo!
Day 30 bonus
My favourite PX with Ti scales so not strictly alox I suppose - the lack of key ring is a bonus for me (I used a harvester and a PX to make this mod, and have a rare harvester with a key ring, though it may get re-made at some point!). Beer time!


-
Cool looking badges.
My sidekick came a day early so she's been busy. She likes to have her pick of canes so she laid them all out to choose from.
She's got nearly as many as I do. 🙄
-

Thanks for saying that PitCarver definitely wanted to make something cool for this challenge and comis really did a great job

@comis said:
Thank you for the chance for allowing me to get involved with the design process, you have provided the core idea of the badges and I just work off from that.
Great challenge!You definitely saved the day comis! My attempt at making a badge was not successful

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
