Appreciation for the Explorer
-
PBMT?
Apologies, been using that in some of the other threads. like tinker gnome stated, pliers based multitool.
@charlie fox said:
For my next SAK I'm really torn between the Explorer and the Compact. Both have a lot of desirable features
The Compact for me is best out and about like at the shops or at the office, while the Explorer has a more versatile toolset I’d need at home (or someone else’s house).
-
Explorer installed a clip to a Leatherman sheath today. Awl and Philips used.
[attach id=0 msg=2430028]

-
@Grand_Banana said:
It is easily my favorite and preferred SAK.Same here. I continue to experiment with others, but always come back to the Explorer (Plus). Its just too good, starting with the inline phillips.
-
@Grand_Banana said:
Explorer installed a clip to a Leatherman sheath today. Awl and Philips used.[attach id=0 msg=2430028]
Nice. Where'd you get the clip?
-
Thanks, bro.
-
Spent the last month on the Alox challenge and rarely used a cellidor model, let alone my trusty Explorer. Today I’m giving the Explorer some pocket time and noticed it really has seen some use.
The scales are scuffed and scratched and dented from sitting it down, sliding it around, dropping it, and holding in hand with screws and the like.
[attach id=0 msg=2437973]
My most used tools tell the story. The in-line Philips demonstrates the soft Vic steel, but has held up well over time driving stubborn screws. The cap lifter has seen similar use and as a pry bar really hasn’t worn down as much as I’d thought it should. The awl has some scuffs I couldn’t pick up in a picture and is dented from scraping and poking and drilling. The scissors are loose and stick from all the small imperfections cutting harder plastics and the like. The small blade is still wicked sharp along the belly to butt, with the tip showing the most wear.
[attach id=1 msg=2437973]
Certainly a knife I appreciate even if I don’t use the full toolset as frequently as these most used implements.
[attach id=2 msg=2437973]



-
Well said, sir. I too have not carried an Explorer for 30+ days because of the Alox Challenge. Though I love the thinness and aesthetic of Alox, its nice to have an Explorer back in my pocket. Its my all time fave.
-
@powernoodle said:
Well said, sir. I too have not carried an Explorer for 30+ days because of the Alox Challenge. Though I love the thinness and aesthetic of Alox, its nice to have an Explorer back in my pocket. Its my all time fave.I hadn't either powernoodle for the same reason.
Found myself reaching for my Explorer and slid it in my 5th pocket today.
Launched from the Southwest
-
Thanks powernoodle

The Explorer will get some dedicated time this month before I start the spirit challenge in Oct. it is also my top SAK.
-
this is my favorite Sexplorer. 2017 White Christmas edition. Very Sexy !!!!

-

Very sexy! Makes me think of that Right Said Fred song…



-
One of my all time favourites is the Explorer. Happy Friday as well!

-
@marlowe221 said:
I have such mixed feelings about the Explorer!I love it for nostalgia reasons - it was my first SAK that I got while in the Boy Scouts.
But...
I'm really of two minds about the Phillips/mag glass layer. Sure, they are fine tools. The problem is that the 2D can opener Phillips can do 90 - 95% of what the 3D Phillips can do. Not to mention the fact that the driver is too thick to reach many recessed screws I come across. It's also the wrong size - I wish it were more of a #0/#1 as opposed to the #1/#2 size that it is. That would make it have somewhat less overlap with the Can Opener.
Also, it's too short (e.g. - too short to reach screws on a door knob, for example)! My original Explorer is a mid 90s model and the driver is longer. I bought a new one last year with the idea that I would carry/use that one from time to time and preserve my first SAK. But the driver is shorter for no apparent reason. I've read that it's because of the change in mag glass over the years, but I'm not sure about that. There's a pretty big gap between the two tools on that layer. The driver could be longer by at least 1/8" without any issue opening/closing the new style mag glass that I can see.
I have actually found the 58mm Combo Tool Phillips to be VASTLY more useful and versatile. It can do anything from #00 to #2 screws! I keep a Rambler in my pockets at all times. To be fair, most of the screws I encounter are in electronics and kids toys where #0 and #1 size screws are by far the most commonly used. You don't see many #2 screws in that arena, though they are used much more in construction and furniture.
The mag glass is great and I do use it from time to time when working on things like computer/networking equipment. But it's not something I need to keep in my pocket 100% of the time. Instead I keep my Explorer out on my desk so it's handy when I'm tinkering with stuff.
So... yeah. I think the Explorer is great! And I don't end up carrying it much. I'm much more likely to be carrying a Spartan/Tinker/Recruit along with a Rambler. The Deluxe Tinker is attractive with the pliers though!
My exact feelings also...
It's a good SAK for sure, it's also a "looker", i've carried it for a couple of months when i bought it.
But it always felt like carrying a bulky 4 layer SAK for the same benefit of a Climber really... I honestly think that the inline Phillips is highly overrated vs it's actual function and usability. It looks great, but is it really that much more usable than the can opener SD for example...? For real life sporadic use...?
I can get more SD variety and functionality with any other smaller SAK's (84 or 91mm) and a bit adapter with some bits than the inline phillips.
Also the Mag glass has very limited use for me, it's very small, and if i want to quickly enlarge something to see, i'll just grab my phone and take a pic of it..., much more useful to enlarge anything, IMO.So, even if i like the Explorer, i really don't actually carry it anymore. For 4 layers in an urban setting, i'd rather carry a Deluxe Tinker, much more real world functionality
-
@MacGyver said:
My exact feelings also...It's a good SAK for sure, it's also a "looker", i've carried it for a couple of months when i bought it.
But it always felt like carrying a bulky 4 layer SAK for the same benefit of a Climber really... I honestly think that the inline Phillips is highly overrated vs it's actual function and usability. It looks great, but is it really that much more usable than the can opener SD for example...? For real life sporadic use...?
I can get more SD variety and functionality with any other smaller SAK's (84 or 91mm) and a bit adapter with some bits than the inline phillips.
Also the Mag glass has very limited use for me, it's very small, and if i want to quickly enlarge something to see, i'll just grab my phone and take a pic of it..., much more useful to enlarge anything, IMO. Also the Mag glass is by far the most fragile part on any SAK.So, even if i like the Explorer, i really don't actually carry it anymore. For 4 layers in an urban setting, i'd rather carry a Deluxe Tinker, much more real world functionality
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

