What Did You Use Your Multitool For Today?
-
The SOG PowerPint came in handy for readjusting the Docter sight on my Artemis CP2

[attach id=0 msg=2434419]

-
The special Spirit was used today to, in order of importance, open a beer and dispose of a hot aluminium foil BBQ container after the pork filet was done


-
Yesterday took the air conditioner out as the weather is not that hot anymore. I had a plywood with a hole for the air duct replacing the outer window. There was some storm in the summer that made the plywood rattle and I feared it might fall to the street so I had jammed the plywood in place with two wooden posts that I nailed to the window frame. Had to take out the plywood with posts first. Used the Curl as a hammer to knock of the posts. Pliers to remove the nails. And used the Squirt to tighten few screws in a tight spot.


Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
Must be nice to shut the air-conditioner off in September...but don't y'awl get some rather long winters?
-
@Farmer X said:
Must be nice to shut the air-conditioner off in September...but don't y'awl get some rather long winters?We have a mobile air conditioner unit that we use during the warmer months primarily from may to september.
We do have long winters. Sun rises late and it gets dark early. In the most northern parts of Finland the sun does not rise at all in the middle of winter. Now it's getting a bit darker here in the south and the day seems to be shortening at a pace of 5-6 minutes a day. Good time to start carrying a flashlight again. :)
I just remembered that I took photos yesterday that works for this thread. Used the Squirt flathead to open up the scissors after the dishwasher and put some paraffin oil to the pivot area. Some rust had developed but got it off just by wiping with the oil. Also used the file as a scraper to remove some stuck dirt as I've ground the tip into a chisel. The tip was a bit rough from factory so it was an easy "mod". Had a photo of that too but nobody wants to see some stuck food being scraped off :D

Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
@Pilotsupergrip said:
In the most northern parts of Finland the sun does not rise at all in the middle of winter.The northern parts of Alaska and Canada are the same way.
What Squirt do you have? They're great little tools!

-
@Farmer X said:
The northern parts of Alaska and Canada are the same way.What Squirt do you have? They're great little tools!

It a PS4. Great for small tasks. I like the toolset and the sturdy feel. I think I bought it during a summer holiday trip from a jewelry store we visited. Changed the batteries to a watch I think. And I saw the Squirt there on a display somewhat underpriced. Didn't buy it at once when I saw it but had to go back to the store to buy it after few hours. Lucky I did! Got my brand new Micra in a same way from a flea market few years later :D
The Squirt seems to get a little more pocket time than my Micra. Both are great tools though, just for different purposes. People don't get amazed when you pull one out from your pockets in an office so that's a bonus.
Got an action pic of Squirt from yesterday also. Had a charger that had a loose led light that I had to glue back to place and the charging pins were bent slightly. The philips head works well even with the small electronics screws. At least if they are not sunk deep.

Lähetetty minun SM-A426B laitteesta Tapatalkilla
-

Cut some drywall, tightened a recessed nut, tightened a screw, filed down some plastic, and pried out a plastic part from a metal bracket

-
Cut some drywall, tightened a recessed nut, tightened a screw, filed down some plastic, and pried out a plastic part from a metal bracket

It's hard to work on recessed nuts with LMs. Do you have a way to use sockets? Or did you manage to do that just with the pliers?
Seems like your LM got some real use today! Is that btw a Rebar or ST? Hard to tell from the picture as there is no way to compare the size :D
Lähetetty minun SM-A426B laitteesta Tapatalkilla
-
Used the Curl to put a new wick for my old zippo. Used the pliers to pull out the wick and cotton balls and awl to push them back in. Got to use the flathead also on the flint spring screw.
Lähetetty minun SM-A426B laitteesta Tapatalkilla

-
Today Curl helped to unscrew our two tower fans for thorough cleaning so we could take these to storage as the weather is not that hot anymore.
Lähetetty minun SM-A426B laitteesta Tapatalkilla


-
Used today the Curl diamond file to sharpen the trauma shears of my IFAK. The blades were in a bad shape from factory. Wish I got more higher quality shears like Piranhas or even LM Raptor but after sharpening these cheap ones might do just fine. Im not expecting any emergency use for these but I like trauma shears for my IFAK more than the smaller nail scissors as these produce more cutting force and thus are more versatile. You never know. Might have to cut my pants the next time in the woods. :)
Lähetetty minun SM-A426B laitteesta Tapatalkilla

-
Spirit XC; quartering guavas. [attach id=0 msg=2441172]

-
I used my multitool to pry off the knobs on my cooker hob for cleaning because they were rather stiff. Sorry I didn't take a photo, I was in the middle of cooking and didn't have the foresight to switch it to "off" before I took off the knob. I had to scramble to find the right position before I burned my bolognese!
When did you last clean under your knob? (oo-err)
Danielle.
-
Use the Arc to assemble a rocking chair. Pliers helped twist an Allen wrench I couldn't get enough torque on, and screwdriver to put the rocking portion on

Sent from my SM-G996U using Tapatalk
-
Mother Nature tried to stop access to mailbox with ice and slush to the lock. Enter SwissTool:

Sent from my iPhone using Tapatalk
-
Tightened a loose nut with a Spirit. Also used a package opener once again - truly the most used tool for me [emoji1316]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
