Dutch Army Knives
-
Fosco KL95 with its original box!

-
Leatherman Squirt PS4. Issued to the survival kits of Dutch F16's fighter jets training in the US.

-
Cool haul of goodies there, EMZ!

-
Some great photos there. I never heard of Fosco before. Always fun to learn something new. Is that a handcuff key with the F16 survival kit? Best wishes. Gary
-
Awesome stuff EMZ!

-
"Is that a handcuff key with the F16 survival kit?"
Yes, it is! It is a genuine item in the "Survival Kit, Escape and Evasion (E&E), NSN 6545-01-534-0894", which is the kits official name.
-

Well done EMZ. Looking good again! - I can see that my collection is not yet complete.

@IMR4198:
The KL95 from Fosco is the only knife from the M52 and M61 series that does not have a carrying eye. The quality of Fosco's knives was not up to par and was therefore not used for long. The main problem with knives was consistency; all knives looked different. The back springs don't go all the way back into the blade when it's closed; the notch for the nail are not equal.

These knives were lost all the time – they were thrown away (even in ditches). So, there aren't that many of them left.

Very shortly after issue, the contract was cancelled and the knives were taken back and destroyed. The knife was only issued in 1995.
There are two versions of the KL95 from Fosco: an aluminium (alox) version (1st version) and the stainless steel version (2nd version). The stainless steel Fosco KL 95 is a derivative of the US MIL-K-818-D.
.jpg)
.jpg)
.jpg)
-
Great information from everyone. I had one of the military stainless types made by Camillus. Carrying it was just like having a rock in your pocket. Very much like my old Camillus Cub Scout knife, except heavier. Some great photos, too. Best wishes. Gary
-
I enjoy this thread. I've always had a special place in my heart for military knives of any nation.
-

My latest acquisition: a Victorinox SwissTool Spirit X
This “Spirit” was a 'farewell gift' when the Soesterberg air base was closed in 2008.
Soesterberg Air Base was a military airfield near Soesterberg, between Utrecht and Amersfoort. The airport was the cradle of military aviation in the Netherlands; In 1913, the army's Aviation Department (LVA) made its first flights here. Due to defense cuts, the base was shut down and closed in November 2008.
End as an air base
The dissolution ceremony of the base was on November 12, 2008. The remaining flying squadrons were transferred to Gilze-Rijen air base and the 932 Squadron returned to Gilze-Rijen as a Logistics Squadron. The remaining support squadrons have been disbanded.
.jpg)
-
My latest acquisition: a Victorinox SwissTool Spirit X
This “Spirit” was a 'farewell gift' when the Soesterberg air base was closed in 2008.
Soesterberg Air Base was a military airfield near Soesterberg, between Utrecht and Amersfoort. The airport was the cradle of military aviation in the Netherlands; In 1913, the army's Aviation Department (LVA) made its first flights here. Due to defense cuts, the base was shut down and closed in November 2008.
End as an air base
The dissolution ceremony of the base was on November 12, 2008. The remaining flying squadrons were transferred to Gilze-Rijen air base and the 932 Squadron returned to Gilze-Rijen as a Logistics Squadron. The remaining support squadrons have been disbanded.
Awesome!
-

Loads of UK military bases closed after the end of the Cold War as well. Most turned into housing estates. -
@glenfiddich1983 said:
I hope I won’t regret it, but this weekend I decided to accept the quote for the blade replacement I got from Victorinox (€18, which is about $19.50). Today I shipped it, together with two other SAKs that I’m turning in for repair.I realize that I’ll probably get it back with a modern tang stamped blade, but I’d rather have a complete but modern blade than this snapped off no-blade-at-all, it looks a bit sad this way. I just prey this thing doesn’t get lost in the mail between here and Switzerland :ahhh
I packed the SAK very well, actually I think I never packed one so well with four crosswise layers of tape and multiple address labels inside the parcel and attached to the SAK as well :D
Today I got the knife back from Victorinox. I must say I am very happy with the result and glad I decided to send it in for repair. Here are some pictures.



Looking at the tang stamp they even fitted a 1950's main blade and not a current generation blade

I really appreciate Victorinox made that much effort!
I am not exactly sure in which years these alox Master Craftsmen were issued, but looking at the tang stamp of the original blade that was in it, the blade they replaced it with might even be a bit older than the original one.

This is the original blade, which indicates that the alox Master Craftsman was issued between 1957 and 1973.
The blade they replaced it with is from 1952 - 1957.
But again: I am really glad they didn't put a newer generation blade in it :)
-
Absolutely fabulous. How could it be any better? Now you never have to show it and say, "Yes it is rare. Too bad the blade is broken off." Congratulations to the craftsmen at Victorinox. They did it right. Best wishes. Gary (IMR)

-
-
Fabulous repair, Fiddy83 - I think it looks outstanding - you must be happy with that repair!

-
So happy for you GFiddy!!!! I was hoping so much for this outcome for you!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
