What did you use your Leatherman for today?
-
Another set of great uses, GB 
-
I needed a "third hand tool" to steady my lighted magnifer, to perform a nib inspection and tune up. Its 2100 hrs here and no shops are open or noises allowed that might bother neighbors so, what to do?; get the Surge, ratcheting driver, small holesaw, and a scrap piece of PVC board and... presto!
[attach id=0 msg=2438404] [attach id=1 msg=2438404] [attach id=2 msg=2438404]Edit- the Surge's saw cut the board, the file deburred the edges, the awl removed the plug from the holesaw, and the bit driver ... well ... took care of the ratcheting one!



-
[attach id=0 msg=2438544]
Switched some screws for longer ones to secure the bathroom door hinge at my Mum’s house.
This should keep it in place until I can get up again and do a proper job.
Found some suitable replacements in one of the jars of odds and ends in the garage, souvenirs from my Dad’s forty years of never throwing away anything that might come in handy.
[attach id=1 msg=2438544]


-
I’m going to mix things up here… did not use my Leatherman today, except the bottle opener.
This is important because we went to a Labor Day party. Usually there’s a kids toy that needs fixing, or some other random thing like a can opened or loose cabinet screw, maybe even just cutting some skewers for marshmallows. Not today, zilch. We all know had I not brought it, the world would’ve ended.
[attach id=0 msg=2438585]


-
My trusty Wave helped put our crib together....92 more days from today! Didn't end up needing the bit kit but did use the blade and standard screwdriver.


-
Excellent uses, all

Congrats on the new incoming member to the family, TA7

-

Here's an early welcome to TA8

-
Congratulations in advance on the new addition, TA7!

-
Thanks all! :) T minus 89 days....can't come soon enough!
-
No action shots but I used my Rebar to disassemble a broken UPS. The Rebar removed screws, cut wires, and large flat screwdriver help pry the dead batteries out of the unit. I love the Rebar, I used to be a die hard Wave fan but the pinchy pliers just took the enjoyment of the tool away. The Rebar is my favorite Leatherman by far.

-
Slicing up a memory foam dog bed to fit into the wheelie bin this morning.
He’s an old boy now and has the occasional “accident “, and there’s no easy way to wash these foam pads.
The Free P2 blade cut through it effortlessly to the depth of the blade, of course.
[attach id=0 msg=2443043]

-
@ThundahBeagle said:
We just bought a log cabin home in a wooded area in New England. I have been using the Rebar and Surge a lot, among other "real" tools more suitable as needed.Most recently tore up living room and hallway carpet. We will be laying ceramic or planking. Had to get all those big staples out, and those little copper/bronze narrow, long staples. Rebar and Lady Beagle used her Wave
Congrats on the Cabin !
-
Changed tires for my car yesterday. I had a 2 ton jack to lift the car. There is a small knob that you are supposed to twist with the end of the lever arm to descent the car. With the lever arm it's at least challenging to control the descent and I've had previosly one close call with the car dropping too fast. As I remembered the incident I also remembered the pliers on my Curl on my belt and used them instead. I got great and slow control this way and changed the tires safely!
Lähetetty minun SM-A426B laitteesta Tapatalkilla

-
The best use!
Used my Crunch to open the box of a new Leatherman.
I think they’re going to be friends.
[attach id=0 msg=2445626]

-
@Crunchie64 said:
The best use!Used my Crunch to open the box of a new Leatherman.
I think they’re going to be friends.
[attach id=0 msg=2445626]

-
@Pilotsupergrip said:
Changed tires for my car yesterday. I had a 2 ton jack to lift the car. There is a small knob that you are supposed to twist with the end of the lever arm to descent the car. With the lever arm it's at least challenging to control the descent and I've had previosly one close call with the car dropping too fast. As I remembered the incident I also remembered the pliers on my Curl on my belt and used them instead. I got great and slow control this way and changed the tires safely!Lähetetty minun SM-A426B laitteesta Tapatalkilla
Great Use!

-
Quick update on my ARC - I tried it out on a strand of coated chain link fencing wire this morning, as I do with all my new tools.
It cut it easily enough, but didn’t seem to enjoy the experience…
[attach id=0 msg=2445751]

-
@Crunchie64 said:
Quick update on my ARC - I tried it out on a strand of coated chain link fencing wire this morning, as I do with all my new tools.It cut it easily enough, but didn’t seem to enjoy the experience…
[attach id=0 msg=2445751]
Disappointing, at least you can fit some decent cutters to it. A chap on reddit hardness tested these cutters at mid fifties rc iirc. The previous cpm ones were low 60s.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
