Kick, Fuse, Blast & Core Owners group club.
-
Nice pics, Steve and Poncho

-
Thanks Steve and Rich

Great pic, Steve 8)

-
Awesome pic, Steve

-
Can I ask the hive mind who might remember... How was the Core received by the discerning Leatherman enthusiast and buying public?
It's a chunky monkey and I like it, the accessibility of blades with internal nail nicks and no cut outs in the handle make for a finnikey deployment but it gains it back with a comfortable grip. -
The tools comes out quite well and no one really thought much of it until the ST300 came out later and replaced the Core
The individual tools of the Core are almost identical to the ST300 tools with some minor changes. Also, the Core had washers between all the tools which allowed for easier deployment of each tools individually but some prefer tool clumping to get the tool out that they want 
The fault I have with them was fixed with the ST300 and it has nothing to do with the box shape or the zytel ;) I had problems with the lock tabs breaking (my first one broke in use and the second one, I received as the replacement, the lock tab fell apart on my in about a week just by holding it and taking a tool out :ahhh )
Overall, the Core was liked and well received but people were definitely stoked to see the ST300 go back to the old school handle shaped design

-
@Poncho65 said:
The tools comes out quite well and no one really thought much of it until the ST300 came out later and replaced the Core
The individual tools of the Core are almost identical to the ST300 tools with some minor changes. Also, the Core had washers between all the tools which allowed for easier deployment of each tools individually but some prefer tool clumping to get the tool out that they want 
The fault I have with them was fixed with the ST300 and it has nothing to do with the box shape or the zytel ;) I had problems with the lock tabs breaking (my first one broke in use and the second one, I received as the replacement, the lock tab fell apart on my in about a week just by holding it and taking a tool out :ahhh )
Overall, the Core was liked and well received but people were definitely stoked to see the ST300 go back to the old school handle shaped design

A font of information! Thanks Poncho.
Never knew about the tabs failing on the Core. Had read about that on the 200.
With deployment of the blade I suppose it's just I'm used to a frame cut out, nothing a bit of use won't sort.I have a clean one and a user which I've put in the bikes toolkit, hope it doesn't rust, must give it a shot of acf50

I'm trying to track down a blast at the moment.
-
They beefed the lock tab pins up with the ST300 and problem solved

The Blast has never failed me but people have had different individual tools fail but snapping a flat screwdriver is nothing new and still happens if
:D -
@Poncho65 said:
They beefed the lock tab pins up with the ST300 and problem solved
The Blast has never failed me but people have had different individual tools fail but snapping a flat screwdriver is nothing new and still happens if
:DEarly days but so far so good on the tabs!

It's a chunky little fella, like a mini core
. I like that there's a scissors on board as I find them useful. It's got a decent toolset but I notice a lanyard ring... I wonder if I ditched it and the eyeglasses attachment would a mini bit driver fit >:D
This one was in great condition, just a clean, sharpening and oiling,.oh and I rotated the plier pivot a tad to remove slop. -
Out of all the Zytel tools I miss the Blast the most
I have a few and it was the first LM I bought that replaced my hand me down PST 
Great pic and a very nice looking Blast, ed

-
@Poncho65 said:
Out of all the Zytel tools I miss the Blast the most
I have a few and it was the first LM I bought that replaced my hand me down PST 
Great pic and a very nice looking Blast, ed

:cheersPoncho.
It's very confy in hand, it's a nice tool and one I hope to get well acquainted with in use. -
@ed_is_dead said:
Early days but so far so good on the tabs!

It's a chunky little fella, like a mini core
. I like that there's a scissors on board as I find them useful. It's got a decent toolset but I notice a lanyard ring... I wonder if I ditched it and the eyeglasses attachment would a mini bit driver fit >:D
This one was in great condition, just a clean, sharpening and oiling,.oh and I rotated the plier pivot a tad to remove slop.I was able to swap a bit driver into a fuse in place of the Phillips, I’m sure there wouldn’t be any complications for you.
-
@BillBarrels said:
I was able to swap a bit driver into a fuse in place of the Phillips, I’m sure there wouldn’t be any complications for you.Thanks for the info Bill :)
Any grinding required or was it a straight swap? -
@ed_is_dead said:
Thanks for the info Bill :)
Any grinding required or was it a straight swap?No cutting, no grinding! Dropped right in. There is a small click when I close the handles but that’s due to the pliers swap, didn’t have that issue with the original head but since it doesn’t damage the driver or bits I chose to live with it.
-
Actually all the tools from the Blast, Fuse, Kick (may not have the locking notch on the Kick individual tools
) , Wave, Rebar and similar are compatible with each other
that all have the same pivot end you just have to make sure they are similar width 
-
Thanks a mill for that information fellas.
I must bust out the wrenches.
So last question, will an og wave scissors work in a rebar?
It won't in a side clip or pst:( no spring tension from the small tab which acts on the back spring.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

