What's your latest SAK?
-
I have a Forester which I like a lot. It's a very capable knife, more robust than the 91mm line and safer if you are trimming or cutting away plants.

-
Nice 111’s guys. I was recently torn between a 111 or more 93mms and chose 93s due to alox. I just got the Fx and then I found this electrician for 20% off on etsy. Now I have a lot of carrying to do. [attach id=0 msg=2444484] [attach id=1 msg=2444484]


-
@Enginears said:
Now I have a lot of carrying to do.Life is hard. :)
-
@MTSAK said:
Just picked this one up from the post office about 10 minutes ago. Forester with plain blade from Central Valley Wholesale on Ebay. It's my first 111 mm, but it's awesome, and I'm glad I found it without a serrated blade. It's going straight in my hunting pack when I get home from work and will be put to good use for many different tasks.

Huh... awl I see is a wallet...

-
Statue of Liberty Spartan


-
Victorinox Bantam X PLUS Carhartt EDC wallet
Had to make a video to explain -
Makes sense to me. I like the minimal weight and bulk. Best wishes and welcome to MTo. Gary

-
I just saw the Statue of Liberty Spartan. Nice one, Nate. Best wishes. G

-
Some nice colourful and unusual finds recently.
It’s my 21st wedding anniversary today ( brass and nickel would you believe) so Mrs Bold let me build this and
financed the parts to make it happen. Scales, scissors, blade and awl are from a 2021 Limited Edition Pioneer X I had in the draw. Combo tool from a mil-tec GAK, pivots and screws from SAK Spares and acid etching and brass washing of the tools courtesy Bladebridge Customs. Nickel silver liners too of course! I believe next year is our stainless and stag anniversary ….

-
@Helvetica Bold said:
Some nice colourful and unusual finds recently.
It’s my 21st wedding anniversary today ( brass and nickel would you believe) so Mrs Bold let me build this and
financed the parts to make it happen. Scales, scissors, blade and awl are from a 2021 Limited Edition Pioneer X I had in the draw. Combo tool from a mil-tec GAK, pivots and screws from SAK Spares and acid etching and brass washing of the tools courtesy Bladebridge Customs. Nickel silver liners too of course! I believe next year is our stainless and stag anniversary ….
Very cool [emoji41]
-
@Helvetica Bold said:
Some nice colourful and unusual finds recently.
It’s my 21st wedding anniversary today ( brass and nickel would you believe) so Mrs Bold let me build this and
financed the parts to make it happen. Scales, scissors, blade and awl are from a 2021 Limited Edition Pioneer X I had in the draw. Combo tool from a mil-tec GAK, pivots and screws from SAK Spares and acid etching and brass washing of the tools courtesy Bladebridge Customs. Nickel silver liners too of course! I believe next year is our stainless and stag anniversary ….
Congrats! Both on the anniversary and on the knife!

-
@z1913 said:
Superb build!
What adjustments have you done to the 108 combo tool?@pfrsantos said:
Congrats! Both on the anniversary and on the knife!

Thank you ;0)
Quite a drastic rework of the pivot end. It’s on opener layer spring so have made a spacer for the other end too. I should have taken pics but forgot in my rush to get it together but I’m sure I’ll do this again so will post work on progress then. The Miltec knives are about £9 so really cheap for donors…and surprising passable quality combo tool (blade not so nice and scales are attached by ridiculously inadequate glue). Might just get another couple and keep one for a user.
-
Good looking mod and happy anniversary. I think you are on to something with the MilTecGAK clone. Cheap fodder for the modder. Don't like the crude blade? Mess with it. Bad scales and chintzy glue job? Change. Cheap enough to strip for parts. It would be nice to see somebody include a liner-lock with a tool like the GAK saw/combo tool. That thing needs a lock. The tool is hazardous if you aren't careful. (That comes from decades of carrying one every day) I don't remember seeing a Vic mod with a liner-lock built in. There probably is somewhere? Best wishes. Gary

-
The scales themselves are actually not bad - just can’t see them staying on for long so definitely room for experiment there. The GAKs do have that cover for the saw - but lock would be better for sure….probably above my skill set but you have sowed the seed now

-
You know I don't find the saw particularly hazardous to use. It's when you use the screwdriver on the end that you get it. When you push against a screw and turn it is when the thing tried to fold. You have to watch it folding down when you start maybe, then when you turn the screw any at all, it tries to fold in another direction. I carry a Vic Trooper (daily since early 1980s) and don't think it had a guard when I bought it new. If it had, I likely would have discarded it anyway.
Since you are stripping knives like the MilTec for parts already, it would be relatively easy to just strip a liner with the liner lock out of a Chinese locking folder and cut it to fit. Or use it for a model. I noticed the Euro price. Naturally it might not be legal where you live. Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
