Show off your Sak mod's!
-
Been a while, got in the mood this evening and modded a Spydernox Explorer (minus small blade and awl). Spyderco Dragonfly 2 K390 Wharncliffe blade, Rit dyed older version magnifying glass, 93 mm bottle opener/flathead, fluted corkscrew, and hook with nail file.



-
@pa_strunk said:
Been a while, got in the mood this evening and modded a Spydernox Explorer (minus small blade and awl). Spyderco Dragonfly 2 K390 Wharncliffe blade, Rit dyed older version magnifying glass, 93 mm bottle opener/flathead, fluted corkscrew, and hook with nail file.Lovely work! Are those the olive micarta scales from Taschenmesser?
-
@BarbaBaba said:
A group photo of the ones I made with home made micarta
[attach id=0 msg=2441149]
91mm Spartan with green micarta x-cut with shield. Lambsfoot mod on the pen blade
84mm Sportsman red jute micarta with shield
84mm Vintage Tourist with red canvas micarta
92mm Denim micarta from my old Nudie jeans. Pocket rivet as shield. Single spring with main blade and owlI love all of these. but the pocket rivet over denim is over the top good looking!!!
-
@pa_strunk said:
They are black Taschenmesser scales that I repurposed off one of my old mods. My favorite scales.Thanks for showing it in action!
:cheers: :tu:
-
-
93mm Recruit anyone! Had some spare parts so decided to try this and the small blade from a 91mm sits very well in the 93 frame. Makes a nice little user. Needs a .3mm spacer to take up the slack around the thinner small blade but that’s all.

-
@Helvetica Bold said:
93mm Recruit anyone! Had some spare parts so decided to try this and the small blade from a 91mm sits very well in the 93 frame. Makes a nice little user. Needs a .3mm spacer to take up the slack around the thinner small blade but that’s all.That's not a Recruit anymore (nor a Cadet). I think it's a Private, now...

-
Yep, Private it is!

-
Possibly even a Corporal! Very nice mod there.

-
@Helvetica Bold said:
93mm Recruit anyone! Had some spare parts so decided to try this and the small blade from a 91mm sits very well in the 93 frame. Makes a nice little user. Needs a .3mm spacer to take up the slack around the thinner small blade but that’s all.And I guess you need to make the hole in the 91mm penblade bigger, 2,5-3mm? But a cool mod :)
-
Tonight I did some work and made a Voyageur electrician. There was a little surprise inside the Farmerx I disassembled. [attach id=0 msg=2445602] [attach id=1 msg=2445602] [attach id=2 msg=2445602]



-
Never can tell what you will find when you poke around in somethings innards. I hope Matt doesn't want his knife back now. Best wishes. G
:D -
@BarbaBaba said:
And I guess you need to make the hole in the 91mm penblade bigger, 2,5-3mm? But a cool mod :)Yes, you are correct of course, forgot to mention that step :0) I use a tungsten carbide bit and it goes through like butter.
-
91mm small blade also goes into an 84 mm frame easily too. Just need to take a small amount off the front edge of the tang to make its sit down a bit further.


-
Ah, that was just a little experiment. As I only had a scale with a cutout for a backtool I thought that filling the section with a bit of circuit board might look cool. As it turns out it probably
would have if I had some proper ‘crystal clear’ epoxy to set it in!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




