MiniChamp November to Remember Challenge 2023
-
@Simon_Templar said:
Day 8I am ashamed to say opening a bottle was once again the highlight of the day for the MiniChamp. It's a pity I don't give it more to do, but I am mostly working from home these days and the cold weather doesn't help to get me out and about...
You have nothing to be ashamed of Simon. Any use is a good one.
It is getting the job at hand done.

-
Day 8
Another day at the office, another Minichamp tool coming up short….
Today it was the coat rack that was about to fall off the wall. The screws that needed to be tightened were Phillips, I thought they were #2 size, and I’ve had some success with some #2 Phillips screws with the 58mm combo tool Phillips driver, but not this time!
Turns out these screws were either somewhat stripped out #2s or were actually #3s. The combo tool screw driver simply wasn’t big enough to do the job. Out came the Tinker and the can opener - even then it wasn’t easy, the screws were too big in all honesty.
Again, no action shots from the office so here’s another pic of the SAKs and tools involved.
[attach id=0 msg=2447756]

-
@powernoodle said:
That's because it was a screw-off cap. :ahhhI'm only half joking. I buy Topo Chico by the case at Costco (a.k.a., "Spendco"), and they have screw-off caps.
I thought about that last night and checked today when I drank another bottle of it - not a screw-off cap on these bottles! They were left over from a staff lunch that was catered a couple of weeks ago, so the packaging might not be the same as retail… beats me.

What I did notice is the caps are large - they extend further down than most bottle caps I see. I think that’s why the 58mm bottle opener wasn’t big enough to get a grip on the bottom edge and get leverage on the top at the same time.
-
@marlowe221 said:
Day 8Another day at the office, another Minichamp tool coming up short….
Again, no action shots from the office so here’s another pic of the SAKs and tools involved.
Nice pic marlowe!

-
Day 8 of 30:
Used the main blade to trim some paper to cover my classroom door in order for my class to decorate it for Native American Heritage Month. No pictures of that, though. This evening, I also used the main blade to cut/crush my daughter's medication in half. I really need to find a better method. Some split nicely, and others crumble.
-
-
<u>Day 8</u>
The emergency blade was great at cleaning up this small 3D print.

-
Day 9
MiniChamp vs Rye. The mini main blade made short work of the bread. No surprise there. Oh, for MTSAK. You can buy a pill splitter at any pharmacy. Looks like a little plastic box. Open the lid. Put the pill against the guide. Close it. Keeps the split tablets from squirting across the kitchen table and going under a cabinet too. Cheap fix. Best wishes. Gary
:D
[attach id=0 msg=2447803]
-
@AzteCypher said:
<u>Day 8</u>The emergency blade was great at cleaning up this small 3D print.
Nice use AzteCypher!

-
You are an encourager, sir!

Powernoodle Day 9
*
Using the orange peeler to open a MicroSD card for my dash cam.* -
DAY 9
I used the blade to cut up a box.
Click on pictures for full picture.


-
@powernoodle said:
You are an encourager, sir!
Powernoodle Day 9
Using the orange peeler to open a MicroSD card for my dash cam.[/i]
Thank you!

Great use of the orange peeler powernoodle!

-
Day 9's morning wander found a lonely Shaggy Inkcap and upon contemplation felt that it was too far gone for eating, so with the scalpel it has been sliced and mixed with spring water to release the dark black ink, which in a few days will be heated with some cloves to fix it for use.......
.jpg)
-
@powernoodle said:
Stoer, I remember the days of the old Kodak cameras with the plastic film cassette and the square flash bulb on top. Circa 1970's.
Unfortunately so do I 8).......but it's a pleasure to use film, the analogue feel, something real, just like the SAK

-
@stoer said:
Day 9's morning wander found a lonely Shaggy Inkcap and upon contemplation felt that it was too far gone for eating, so with the scalpel it has been sliced and mixed with spring water to release the dark black ink, which in a few days will be heated with some cloves to fix it for use.......Nice pic stoer!

-
Day 9, preparing a SAK for shipping

-
@glenfiddich1983 said:
Day 9, preparing a SAK for shippingNice use glenfiddich!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
