The Hacked Leatherman Owners Club.
-
a fine mod indeed

-
I finished my half-Wingman.
I've been wanting to do this with a Charge for a while now, but the Wingman that I used to scavenge scissors was a perfect opportunity for a half-Leatherman. It was a pretty straight-forward mod - I just used the Wingman's parts... there was just enough washers to fill up the ex-plier pivot. The only trick was removing the plate in the handle that works (somehow) with the pliers. I had to buy cobalt drill bits to drill out the rivet so I could remove the plate enabling the handle tools to fit there.
-
Great job, Rich
I
the toolset of that one as well

-
Thank you

-
PST 1.5


PST 1.5 and Charge Knife


-
Great pics! I like that short blade on the PST

-
That saw on PST2 looks very aggressive, was it hard to mod that saw to fit?
Only Tools Matters
-
@ed_is_dead said:
Again, a minor mod but one that eluded me. I wanted a scissors on my sideclip but hadn't realised I needed the stepped spacer washer for it work. Prior to this I was resigned to thinking they were just a mismatch.
The only challenge was ensuring the central gap between the handles did not align with the narrow spring tab or it jams between. I used a thin washer to offset it from doing this.
Delighted with this tool now. The diamond file despite being cut down to fit gets used a lot and the custom mini bit driver and my fave mini bits in the back pocket makes this is a potent light tool for me. ;)
Oh, and a small neodymium magnet and a pin onboard too are dead useful.I'm flabbergasted !
-
@Rich_SD said:
Great pics! I like that short blade on the PST
Thanks Rich
the blade was already broken and I just gave it the profile it has and worked on it until it fit beside the pliers 
@Antti Lammi said:
That saw on PST2 looks very aggressive, was it hard to mod that saw to fit?
Only Tools MattersIt is aggressive 8) I could have left the extra bot on it from the spine that I ground off and it would have still fit but it didn't take much to grind the pivot end down to fit
it was a SOG saw that was rebranded to Harley Davidson 
-
I have always liked that one, buddy!

-
-
It may be the best addition I made to my ST 300M

-
My first "hack", i replaced the surge's main blade with a charge tti one. A little wobbly, but im fairly pleased.


-
:)

-
:) what’s the wood?
-
Walnut... For filling the gap. Wanted to make the tool lighter in an aesthetic way. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




