Any love for Wenger?
-
Trailblazer, Highlander, and Scout are all very similar. Same four front tools with awl and phillips back tools. All three of the above have the can opener on the blade end. Yours is different from all of them in that respect. I wonder if it originally had the short chain on the keychain nub? Who knows. Does it have toothpick and tweezers? Best wishes. G
:) -
No provisions for toothpick or tweezers.
-
@Echotech said:
I'm a big fan too, always that little bit more quirky and inventive....didn't always work but always interesting
Might have to run an other Wenger challenge next year
I only have a couple Wenger, but I would be down
@Antti Lammi said:
I hope Victorinox would do experiments on Delemont line for sake of Wenger innovative experiments of tool combos.Only Tools Matters
Agree. Unlike Vic, Wenger had some unique tools and combos which it would be nice to see resurface.
-
In the 1960s Wenger had a US distributor in Indiana, I think. They generally used numbers for their stock. The Wenger 750 is close to your knife. This is not my photo. I found a photo after I figured out the number. No toothpick, no tweezers (Highlander and Trailblazers usually have both). It has the Z can opener in the right location but it does have a bail. It is always possible that the scales on yours aren't original. Might be original, but just a different year. Wenger changed things around A LOT. Best wishes. G ;)
[attach id=0 msg=2452386]
-
@Antti Lammi said:
I hope Victorinox would do experiments on Delemont line for sake of Wenger innovative experiments of tool combos.Unfortunately this is not gonna happen IMHO
Vic are reducing not expanding their range -
It has been a while since I posted a Wenger photo of something I actually own. This one is a Highlander. No small blade, just a nail file. The file surface is facing the off-side scale (phillips side). Keeps it from scratching the main blade, I suppose. I have never carried this knife, just taken it out of the package for general knife piddling. It is noticeably lighter than something like a Tinker. Best wishes. G
:D
[attach id=0 msg=2452395]
-
Thanks for the Wenger info Gary. Much appreciated.
Looks like the broken right half of that scale was glued on with something that had a chemical reaction as that half of the scale looks distorted by heat. I thought it was epoxy at first but when I put it in a hot bath, the glue turned very gummy and peeled off. Might be the original scales but who knows.
I'm on the lookout for a Wenger that could potentially donate it's scales though I feel bad relieving another old Wenger of it's scales.
-
Hi AC,
You did an excellent job of restoration on that old Voss multi-tool. I saw how it was before and handled it. Since you are making 3D scales now anyway, that old Wenger would look fine with a set of your manufacture. Might be able to sell a few pairs of scales to some of the members here with sad old busted Wengers. Best wishes. G
;) -
Gary,
Appreciate it. :D I'm still playing with the 3D printed scales on my Ranger. I fine tuned my printer a bit more and printed a second set but they still fit tighter than I think they should. I've learned that your printer needs to be tuned really well, just about exact, to print the scales out to the right dimensions. I'm going to try again after I print some gifts for my in-laws (wife's request). I think I'm getting there though. Once I'm comfortable with the fitment I'll do a post on it.Designing scales for a Wenger will be more of a struggle for me as I don't have good CAD software for it but it sounds like a fun challenge.
-
I like Wenger, not exactly sure why but I do. I have a few NOS models I need to post some pictures of them. But I also like Victorinox too - I have a couple of them, one I carry daily.
-
What's not to like about Wenger? Photos are really appreciated around here. They are almost mandatory. Good to see you posting some. I hope you have some fun. Nice people. Lots you can learn. Best wishes. Gary (IMR)

-
I enjoy this one a lot so I carry it quite often. I'm not as smooth with the can opener but I manage. I like the tool load out a lot. I do wished Wenger would have did an awl like Vic tho. Not complaining just thinking outloud.

-
I would gladly carry any of the three. Wenger or either Case. My style knives. I looked at the videos for the new Case knives from the SHOT show. No. Just no. I'm tired of flippers and clippers. New Case knives don't look any different than fourteen dozen others. Best wishes. G

-
Is that a Wenger Traveller? If so - Yes nice model
I really liked the Wenger awl as it** was not** sharp
Most blades on all SAKs are sharp - and sometimes you don't want sharp - eg untangling a knot or shoelaces etc
The Wenger awl was great for thatThis is also IMHO the same reason why the much hated fish scaler is quite good
PS It is a sad day for Wenger fans - As it looks like Vic has killed off the 85mm line with their lovely scale materials and colours
-

I haven't seen the new knives. I enjoy when they bring out the vault patterns.
-
@Huntsman said:
Is that a Wenger Traveller? If so - Yes nice modelI really liked the Wenger awl as it** was not** sharp
Most blades on all SAKs are sharp - and sometimes you don't want sharp - eg untangling a knot or shoelaces etc
The Wenger awl was great for thatThis is also IMHO the same reason why the much hated fish scaler is quite good
PS It is a sad day for Wenger fans - As it looks like Vic has killed off the 85mm line with their lovely scale materials and colours
Security/Sécurité 14 essentially a Traveller with locking blade. That makes sense about the awl. It really is sad for us Wenger fans. I have a couple I regularly carry. I am a huge fan of Wengers main blade. Its so good.
-
Here is another Wenger I really enjoy. Thought I'd miss scissors but I was wrong. I've always like the little chain Wenger put on their SAKs. This is also one of 2 black SAKs I own.

-
Much love for Wenger. My Cyclist get carried mostly for work these days but I enjoy it randomly on my days off as well.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

