Leatherman Free P2/P4 Club and Feedback Thread
-
@cdcengineer said:
REI has the free P4 in stock and price at $111.93. Usually prices ending in 0.93 are being phased out. Might be an indication that the p4 is being retired.Thanks cdcengineer! I ordered a replacement for one I sold off a year or so ago. I ended up paying $86.00 since I had some dividend saved up. I will give it another chance.
JonesE
-
Im glad the post helped some of you spend your Christmas money. I pulled the trigger on an ARC with medical discount. Got bit kits too.
I've been carrying the P2 for a long while now, but I've been collecting charges (not sure why aside from an addiction). I view the P2 as disposable because I think it's replacement value is 75ish. The tip is busted too.
Might either save the arc and carry an old Ti that LM replaced the plier head on, or start carrying the arc. But even with the discount it's such an expensive tool to replace if lost.
I'm curious if the implements on the arc are as weak as the P2. I find the flat and Philips easily round off vs the charges tough tool set.
It'll be interesting to see the new Free lineup. They gotta have something planned with the crunch and alleged P2 / P4 retirements. There's gotta be a tool with serrated blade as LM will need parts to repair P2s.
My P2 has early 2019 date code but i doubt itll be collectible. I like the ease of deployment on the Free, but never got used to not having a saw and bit driver. I would've got the P4, but knowing the arc with bit driver was coming, I held off. Merry Holidays
-
@cdcengineer said:
Im glad the post helped some of you spend your Christmas money. I pulled the trigger on an ARC with medical discount. Got bit kits too.I've been carrying the P2 for a long while now, but I've been collecting charges (not sure why aside from an addiction). I view the P2 as disposable because I think it's replacement value is 75ish. The tip is busted too.
Might either save the arc and carry an old Ti that LM replaced the plier head on, or start carrying the arc. But even with the discount it's such an expensive tool to replace if lost.
I'm curious if the implements on the arc are as weak as the P2. I find the flat and Philips easily round off vs the charges tough tool set.
It'll be interesting to see the new Free lineup. They gotta have something planned with the crunch and alleged P2 / P4 retirements. There's gotta be a tool with serrated blade as LM will need parts to repair P2s.
My P2 has early 2019 date code but i doubt itll be collectible. I like the ease of deployment on the Free, but never got used to not having a saw and bit driver. I would've got the P4, but knowing the arc with bit driver was coming, I held off. Merry Holidays
You wanna sell that P2? I’m curious to try it as a slim EDC alternative.
-
Maybe. Lemme see how the arc is when it arrives
-
@cdcengineer said:
Maybe. Lemme see how the arc is when it arrivesSounds good. Can you tell me the date code? I also collect 0519 tools for my carry.
-
Unfortunately it's 0819
-
Thanks. Maybe I need to get to work and sniff out a 0519.
-
My P4 is 0519 and 0619, but strangely, my P2 doesn’t seem to have any date markings.
-
I think the oldest ones (1st released) didn't have a stamp. If I recall, there were a couple changes made early on too.
-
@cdcengineer said:
I think the oldest ones (1st released) didn't have a stamp. If I recall, there were a couple changes made early on too.That’s interesting. I only bought it about three months ago from the local branch of a big camping and outdoors chain. I wonder how long they’d had it in their warehouse.
I assume the date would be on the small tabs of metal under the pliers on the P2, same place as the P4?
-
My P2 only has a date code on the tab on the side under the screwdrivers. I think that's how P2s are dated
-
The fact they had a tool sit that long explains the early retirement. Tho it's a great sized tool, the implements are lacking for my needs
-
They appear to be sold out at REI
-
I'm now starting to think we'll see a Free P2+ and P4+ in 2024 that include a bit driver instead of all the flat head screwdrivers.
Anyone heard if there's going to be price increases in the new year? I think that's happened the past few years.
-
@cdcengineer said:
I'm now starting to think we'll see a Free P2+ and P4+ in 2024 that include a bit driver instead of all the flat head screwdrivers.Do you think there’s room for both alongside the Arc?
I’d like to see smaller and larger versions first, with a combo blade, less expensive steel version of the Arc later.
I think a Free MiniTool without Magnacut and Free Surge with all the goodies would be popular.
Luckily for me, I’m not a Leatherman designer or engineer, so I don’t have to figure out how the Free Mini will work.
-
I'll try to take some photos tomorrow, but I have been in love with the P2 essentially since its release. I carried a surge for years, and while it is an absolute tank of a MT, the weight and need to open it to access drivers really annoyed me after a while. I ground the tip of my surge serrated knife into a #2 slotted, which slightly took care of the driver issue, but I still just found myself getting annoyed with the tool. I tried a wave+, hoping it's smaller stature would make me like it more, but mine is so tight and I had the same issues I had with the surge--maybe moreso, since it was smaller and I was fighting to open the interior tools.
Then, while doing some research, I found the free series. I loved the fact that the tools are all on the outside, especially because my job involved constantly needing just a screw driver. And the P2, being my entry into this series, really did everything that I needed. I tried carrying a bit set in a sheath for my surge for a while with a tiny flashlight and pen and quickly realized that I am a pocket clip guy and to heck with adding all kinds of extras I will never use. The few drivers, the robust scissors, the sharp wire cutters: this thing really checked all my boxes and then some.
I thought I lost one at work. I retraced my steps, I tore my work vehicle apart. I was heartbroken, but I put the wave in my pocket and figured I'd learn to love it. I was wrong, and I bought a slightly used replacement P2 on ebay after a dew days. Then, last week--about 8 months after losing and replacing my first one, I found my lost MT deep in my bedroom recliner. I was extremely excited to now have a back up, and my wife had just gifted me an ARC for Xmas. I am living high on the hog.
And another thing I've seen far too often is fear that the magnets will collect too much gunk and lead to failure. As an industrial electrician, I have cut thousands of holes and windows in panels and enclosures and have not had a single issue with chips and shavings. My last job was in a cement mill and limestone mine, which is basically hell on earth for tools and equipment. I was always getting my surge so full of gunk that I would need to submerge the thing in solvents to clean it and then do the same thing with a bath of oil to lube it up. I cleaned and oiled my hand tools and boots every month when I was on night shift, but my P2 never needed any help.
I love the P2 because of its minimalist tool set that works wonders for what I do. And I am not necessarily a guy that will struggle with a subpar MT if I don't have to. I deal with electricity, so jamming a lightning rod into places it shouldn't go is very low on my priority list. My MT is a back up to an extremely indulgent hand tool collection, but there are certainly times when I forgot to bring something and am smitten to have what will do the job clipped to my pocket. I'm excited to have and carry an ARC, but I still think the P2 is my grail.
-
Great post and welcome to the club Kevdynamite! It was great to read your feedback and experience with the P2. Glad it is working so well for you.
JonesE
-
Awesome story @Kevdynamite glad you have such a fondness for the P2. Before my Arc I've only owned the P2, and it's a great tool with a minimalistic tool set.
Sent from my SM-G996U using Tapatalk
-
Size of the P2 is great, but a P2+ or P3 in the some size with bit driver is going to be better. I just got the arc, but have been carrying an old Ti. Love the Ti. I had never carried it with a pocket clip till now. Always used a sheath with wave and charge, but my P2 turned me into a pocket carrier. However with the Ti, I notice the handles open a bit in my side carhartt pocket. The magnets on the P2 never allowed that to happen.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login